LED License plate light choices

[djrashonal]

So I just chopped my tail and I'm looking at swapping out the stock license plate light with an LED. I have a few Different options:


http://www.monsterparts.com/pc/222-2128/Electrical/222-2128.html

http://cgi.ebay.com/ebaymotors/BLACK-Universal-Motorcycle-LED-License-Plate-Light-Bolt_W0QQitemZ230398684869QQcmdZViewItem?rvr_id=&itemid=230398684869

http://www.radiantz.com/cart/index1.html?250.html&1

Any thoughts? Any FHE? any other recommendations?

[RUFKM]

I have the black radiantz frame and I like it.  My stock duc one didn't hold the bulb well enough to keep it lit so I switched to the LED.

[Kopfjager]

If you want to stick with a red lens, get one for a Buell. It has a clear bottom and puts out enough light for
your tag.

[djrashonal]

If you want to stick with a red lens, get one for a Buell. It has a clear bottom and puts out enough light for
your tag.

for the tail chop i went with the motodynamics smoked lens, for 75 bucks, i'm happy with it, and it was a super easy install!

[djrashonal]

I have the black radiantz frame and I like it.  My stock duc one didn't hold the bulb well enough to keep it lit so I switched to the LED.

Did you cut off the stock license plate light and wire the frame up to that? or did you splice it in?

[Kopfjager]

for the tail chop i went with the motodynamics smoked lens, for 75 bucks, i'm happy with it, and it was a super easy install!

Doesn't that one have a clear bottom as well?

[djrashonal]

No, the motodynamic light doesn't have a clear bottom, it also uses red/yellow LEDs, so I dont think it could be used as a License plate light

[Kopfjager]

^^ Will the clearalternatives lens fit? It has a clear bottom.

[djrashonal]

Yea, i think they're all interchangeable.  You got a lead on a nice, cheap CA taillight? 

[Kopfjager]

I'll check tomorrow.

[RUFKM]

Did you cut off the stock license plate light and wire the frame up to that? or did you splice it in?

I coupled it into the spade connectors for the taillight.

[djrashonal]

I coupled it into the spade connectors for the taillight.

sweet! any pics of the install?

[He Man]

i used an ebay LED pod from this guy named joe florida. he has a life time warranty and if you email him if it ever fails, you get a new one. $4 bucks. any color you want, though in many states you need white

[djrashonal]

i used an ebay LED pod from this guy named joe florida. he has a life time warranty and if you email him if it ever fails, you get a new one. $4 bucks. any color you want, though in many states you need white

thanks He-man! I searched ebay, found the ones you were talkin about bought'em for 3.25....now im just waiting for delivery. did you splice yours into your wire for the tailight or the license plate light? did you get the 3 led pod or the 4? I picked up :

http://cgi.ebay.com/ebaymotors/4-LED-Cluster-POD-Motorcycle-Accent-Lighting_W0QQitemZ400074614195QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item5d264e25b3

was also looking at this:
http://cgi.ebay.com/ebaymotors/3-LEDs-In-Line-POD-For-Accent-Lighting_W0QQitemZ400074618320QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item5d264e35d0

[He Man]

i had both. i orignally bought a green one, but he sent an aqua one and maintained that it was green. but i kept it. it was secured right so it fell off the mount and my tire bounced it to death. and i threw it away. Then i bought the 4 pod white led (white is req by law here) and its been fine, especially since it was only $3.25 ( the bar one was more expensive for some reason).

I hooked it up to the license plate lamp wire. i cut the original ends off and soldered the pod directly onto them and then threw a heat shrink over it.