slow day at the bike shop

Started by cbartlett419, December 29, 2010, 05:33:20 AM

Previous topic - Next topic

ducpainter

Quote from: JEFF_H on December 30, 2010, 08:51:26 AM
Nokian makes studded bike tires

stopintime gives nokian the thumbs-up  ;)
[partial threadjack]

We have Nokian tires on T's Focus. Had a different model previously too.

stopintime is right.  ;D

[/end]
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."




the_Journeyman

Based on the principle of tire cables commonly used on FWD cars, I'm betting it helps some.  That's a lot of patience to put all of those on.

JM
Got Torque?
Quote from: r_ciao on January 28, 2011, 10:30:29 AM
ADULT TRUTHS

10. Bad decisions make good stories.

Monster Dave

Quote from: cbartlett419 on December 30, 2010, 11:12:20 AM
so does that work?


It wasn't me that did that, but I'd bet too that it would help a bit!

triangleforge

A few years back, I made a set of studded MTB tires using sheet metal screws, an old set of tires & a heavy tube liner, and they worked really well on hard packed snow/ice like your average snowy street/bike trail after a lot of traffic.

I've wondered about trying these, too -- pop rivets on narrower cyclocross tires:

http://www.instructables.com/id/Pop-Rivet-Ice-Tires-for-Your-Road-Bike/

But the storebought ones are better, I'm told -- carbide studs that are actually designed for snow and ice really do the trick.

I'd wager the cable-tie trick would work OK for forward traction, but not so much for lateral traction. It would be easily reversible (unlike any other DIY tire mod I know of) and fairly cheap.
By hammer and hand all arts do stand.
2000 Cagiva Gran Canyon

cbartlett419

just never something I've had to deal with in north louisiana, you northern folk are dedicated

Kopfjager

Quote from: cbartlett419 on December 30, 2010, 11:12:20 AM
so does that work?

It would do nothing but make your tires slicker. Oh hey I got an idea, let's put a bunch of plastic around the rubber.  :-\
Woohoohoohoo! Two personal records! For breath holding and number of sharks shot in the face.

badgalbetty

looks like a good idea to me but what do I know? I am just a girl. I'll ask my boss he rides a bike.
"Its never too late to be who you might have been" - George Elliot.

Artful

Quote from: kopfjäger on January 01, 2011, 01:24:51 AM
It would do nothing but make your tires slicker. Oh hey I got an idea, let's put a bunch of plastic around the rubber.  :-\

Kinda like putting a bunch of metal over rubber, aka snow chains ;) it actually works, but is such a pain to put on/remove and the fact it only works with disc setups makes it pretty worthless compared to purpose made snow tires. Cheap though... so that's something I guess.
Every time I meet a new group of your friends that understand you and your weird sense of humor I'm a little more amazed that there are other people in the world like you that lived through childhood - My loving girlfriend

Kopfjager

Quote from: Artful on January 01, 2011, 08:11:21 PM
Kinda like putting a bunch of metal over rubber, aka snow chains ;) it actually works, but is such a pain to put on/remove and the fact it only works with disc setups makes it pretty worthless compared to purpose made snow tires. Cheap though... so that's something I guess.

Try some plastic snow chains, and get back to me.  ;)
Woohoohoohoo! Two personal records! For breath holding and number of sharks shot in the face.

badgalbetty

#25
Quote from: kopfjäger on January 01, 2011, 11:46:48 PM
Try some plastic snow chains, and get back to me.  ;)

isn't that what those are or did I miss something?

I understand what you are saying but in this application it seems to be working.
"Its never too late to be who you might have been" - George Elliot.