Bar Ends for S4RS?

[arai_speed]

So while looking for some new bar ends for my 2007 S4RS I noticed that all of the Fleabay listings exclude my model and year! Some just don't list it, other explicitely mention it!

WTF! 

I was looking at the M-Label ones and they have the following:

"All Monster Series (will fit S*R series)/will not fit 900M,S4RS Tricolore"

Are the bars on the S4rs different for some reason?

[JEFF_H]

ebay sellers are not generally known for being knowledgeable on specific applications  

3 types of bar-ends
-steel bars all chrome-handlebar monsters (except for some M900S had alum bars)
-aluminum tapered handlebars (S2R/S4R/S4RS)- thicker wall makes the hole smaller
-S4 threaded bar-end

[Bill in OKC]

I don't know if they are different, but I ordered - still haven't installed - a Throttlemeister.  I had forgotten that the website said you have to drill out the bar end before it would fit.  Maybe they have a smaller internal diameter than the other bikes.

[arai_speed]

ebay sellers are not generally known for being knowledgeable on specific applications 

3 types of bar-ends
-steel bars all chrome-handlebar monsters (except for some M900S had alum bars)
-aluminum tapered handlebars (S2R/S4R/S4RS)- thicker wall makes the hole smaller
-S4 threaded bar-end

Thanks for the info!  I now feel better spending my hard earned $15 on bar-ends.

[BoDiddley]

I don't know if they are different, but I ordered - still haven't installed - a Throttlemeister.  I had forgotten that the website said you have to drill out the bar end before it would fit.  Maybe they have a smaller internal diameter than the other bikes.

These have been mentioned before in other threads but they are the absolute best, but a bit pricey.  They have a shoulder that steps into the bar with an o-ring.  Stainless steel and copper expansion pieces make them heavy.  The o-ring fits so tight I had to oil it and hit it with a rubber mallet to make it fit.  I liked the solid feel of them.   The other down side besides the price is they do not sell replacment ends.  The smallest size specifically fit the S4Rs.

http://www.motovationusa.com/mvstore/Scripts/prodView.asp?idproduct=304

[arai_speed]

These have been mentioned before in other threads but they are the absolute best, but a bit pricey.  They have a shoulder that steps into the bar with an o-ring.  Stainless steel and copper expansion pieces make them heavy.  The o-ring fits so tight I had to oil it and hit it with a rubber mallet to make it fit.  I liked the solid feel of them.   The other down side besides the price is they do not sell replacment ends.  The smallest size specifically fit the S4Rs.

http://www.motovationusa.com/mvstore/Scripts/prodView.asp?idproduct=304

Those look really nice...but yeah...at $90 each that is a "bit" pricey   

[BoDiddley]

Those look really nice...but yeah...at $90 each that is a "bit" pricey   

When you say each, It is still pricey but that is for the set.........of Two a pair.

[Chris,desmoworld]

did you see my ones ?

6 designs + 6 colors outside + 6 colors inside = a lot of combinations  at a price of les than 30 Euro for made in germany is not so bad

sample :


designs
http://www.desmoworld.com/shop/de/rahmendeckel_frameplug_design

check :
http://www.desmoworld.com/shop/de/catalogsearch/result/index/?q=lenkerendkappen&manufacturer=166

what do you think ?

Chris

[arai_speed]

did you see my ones ?

6 designs + 6 colors outside + 6 colors inside = a lot of combinations  at a price of les than 30 Euro for made in germany is not so bad

sample :


designs
http://www.desmoworld.com/shop/de/rahmendeckel_frameplug_design

check :
http://www.desmoworld.com/shop/de/catalogsearch/result/index/?q=lenkerendkappen&manufacturer=166

what do you think ?

Chris

I think they look really really nice!  Great work.

Curious, what does a set cost (shipped) to the good ol' US of A?

[Chris,desmoworld]

Hi,

the price is 37.80 Euro shipped to USA

bye
Chris

[scduc]

Chris,

Are you going to run the bar ends in the 5k-N style?

[Chris,desmoworld]

Hi,

yes the 5k-N design will be a standard design in the near future 

Chris

[LA]

Put lane splitter mirrors in your bar ends.

LA

[Chris,desmoworld]

Chris,

Are you going to run the bar ends in the 5k-N style?

finished 



thx
Chris

[Nomad]

Chris, those look awesome, really wish I had seen this thread before I just spent twice as much on Rizoma bar ends....