Next Set of Mods - Suggestions for 05 S2R800

[ducatiz]

I was finally able to solve my exhaust issue.  Found this LeoVince SBK exhaust after searching online for several hours.  


I have seen only one other Monster with this twisted pipe LeoVince exhaust.  Ordered some black fork tape and a carbon fiber front fender from a 848.  

Here is my bike with that setup (about a month after I bought the bike)




I liked the idea, but on the bike it just looks weird and busy IMHO.  They use a generic can, it's the same SBK they have for every bike and you can see it's too LONG esp with a chopped tail.  They always showed it from the right corner angle so you can't see the length.  

The spaghetti collector sticks out from teh bike too.  I couldn't love it to save my life.  It hangs much further down than the pictures they show, about 5" below the seat. 

It performed well and the LeoVince kits are VERY nice quality otherwise, but...  I took it off after a month and sold it.

[DucRS]

The concept wasn't too bad. I was Just wondering why the two pipes weren't mated at the bottom as one which would have eliminated the whole spaghetti look.

[corey]

probably has something to do with the welded crossover just under the rearset and its effects on scavenging.

[DRKWNG]

Is Jim = Zhane?? Want to ask him if he's had any issues like Stop referenced above. 

Yep, same guy.  He hasn't had the bike all that long, but it's the one he bought from Steve (Tocino), so maybe you can ask him as well.

[corey]

also.. if you're talking exhausts that don't hide the SSS or the open wheel...
ZARD baby.

[Witty Name Here]

This mid-pipe/ exhaust is tight !

[Brett76]

Black SlingShotRacing/SpeedyMoto wet clutch cover?

Does the Speedy Moto option fit an S2R 800???

[TitanMonsterS4R]

Does the Speedy Moto option fit an S2R 800???

SSR's will fit a S2R800 from 05 - 07 the site says.

[TitanMonsterS4R]

This mid-pipe/ exhaust is tight !

Witty - what exhaust is that? Quat D?

[stopintime]

Does the Speedy Moto option fit an S2R 800???

You will have to ask SpeedyMoto.

When SlingShotRacing released their 696 cover, a few guys asked for a cover fitting the S2R 800. The answer was that they would soon make one - and they did. Perhaps this means that they are different?

[Witty Name Here]

Mad duck, that's a custom exhaust from these guys.
http://www.terramostro.com/index.cfm
They don't say what the muffler is. I cant read it in the photo. Looks a little FMF but isn't. For the woods.
Check out those custom brackets for the foot pegs.  Not sure if that pipe routing would interfere with S2R peg and brake lever. I think that y-pipe and routing just before it look much cleaner than the Leo V. and would work with the SSSA.
Nice bike you scored. I was watching that in the for sale section. BadGalBetty seems cool.
I wrapped my forks (S2R8Dark) in black vinyl made a big difference.
Oh ya! There's a Quat D mid-pipe for sale on the other forum. Painted black w/turn out tips on the end if you want to run just a mid pipe. I tried it just to see how loud it was. Forgetaboutit.
Insane tail chop !

[TitanMonsterS4R]

Mad duck, that's a custom exhaust from these guys.
http://www.terramostro.com/index.cfm
They don't say what the muffler is. I cant read it in the photo. Looks a little FMF but isn't. For the woods.
Check out those custom brackets for the foot pegs.  Not sure if that pipe routing would interfere with S2R peg and brake lever. I think that y-pipe and routing just before it look much cleaner than the Leo V. and would work with the SSSA.
Nice bike you scored. I was watching that in the for sale section. BadGalBetty seems cool.
I wrapped my forks (S2R8Dark) in black vinyl made a big difference.
Oh ya! There's a Quat D mid-pipe for sale on the other forum. Painted black w/turn out tips on the end if you want to run just a mid pipe. I tried it just to see how loud it was. Forgetaboutit.
Insane tail chop !

I do like the Y shape exhaust on that TerraMonster, however, I think the BIG reason why I went with the Leo V was because I like the spaghetti wrap piping that leads to the can.  We shall see if this sexiness works to my advantage or disadvantage. 

I can not lie buying BGB's bike was a good investment... [moto]  The setup is really nice and given all the upgraded components one only need make a couple of changes which are already underway. 

Carbon fiber 8484 front cowl just arrived from Houston Superbikes.  New Tank courtosy of Ducati was just installed this morning.  Leo V exhaust should arrive soon.  Plan on taping the forks this weekend.  Bike is coming together nicely for next season. 

[TitanMonsterS4R]

That's the same pipe that Jim has.  If you're not completely set on that one, and want something that no one local has, take a look at Remus.

Looks like Remus might be on deck.  The SBK I bought from StarCycle via Amazon on Jan. 11 hasn't shipped yet and is scheduled to arrive on the 20th (not likely to happen).  Got a note from Amazon today that the part hasn't shipped and they can't confirm its shipment or that the product is in stock and they haven't charged my credit card.   

[TitanMonsterS4R]

And Remus wins.  Just ordered a 2-in-1.  WAHOO, now time to install once it arrives.

[Punx Clever]

I have a Remus setup... not 2-1, but 2-2 on either side of the bike.  All I can say is I love the sound of the unbaffled remus and I think she looks good!