ddmtuning.com for the kit.
i ran into one main issue with the lighting.....
when i wired everything up with the plug-n-play kit with the hid ballast plugged into the low beam connector the ballast would buzz loudly and the light output was kind of pulsating instead of operating in a normal manner. i had a simillar experience installing HID on a car that had daytime running lights. i talked to DDM customer support which was really good, but we couldnt find a solution.
what i did works for me, but may not for you after reading what your ordered...
i simply hooked the hid kit to the high beam connector and still just mounted the bulb in the low beam housing. so, i now have no high beam, but i really dont need it. the HID is more than bright IMO,plus i never used the high beam anyway.
i feel that this wiring method is better for the HID itself because i can manually turn the system on and off with the highbeam switch, thus eliminating it flashing on and off when the starter is hit. i believe i read in multiple places that turning HID on and off rapidly is not very good for the system.
ill try to get some output pics...
EDIT: sorry about the quality, facebook took it down a notch or two...as you can see the output is pretty good despite being in a reflector housing. i sped up the shutter speed to compensate and not make it look brighter than it really is. what you see is about what it is. the bike is obviously on the sidestand, hence the crooked beam
my DIY tailchop if your interested....
rear 3/4 of chop
