Holding in clutch, starts creeping forward

[Privateer]

so I crimped on some bullet connectors to the clutch switch on the HM master, tried plugging it in both ways into the monster's wiring, but still won't start when I put in gear and pull the clutch in.


Any ideas?

[Howie]

Either check the switch for continuity or touch the two wires to the switch and see if the bike starts  I'm not familiar with that radial set up.  Any adjustment?

[Privateer]

Either check the switch for continuity or touch the two wires to the switch and see if the bike starts  I'm not familiar with that radial set up.  Any adjustment?

I used my multimeter on the bullet connectors I put on the HM wires.  I had nothing with the clutch out, pulled it in and I got a different result, so the switch seemed to be doing something. 

I didn't try jumping the monster end of the wires, however.  I'll try that tomorrow.


I figured a switch is a switch.  /shrug