Main Menu

Will these fit for stock rearsets?? (reverse shifter and brake lever)

Started by mr.freezer, February 24, 2015, 06:31:42 AM

Previous topic - Next topic
Print
Go Down Pages1 2
User actions

mr.freezer

February 24, 2015, 06:31:42 AM
Hi Guys.. I have just wondered if these fit my monster 620 with stock rearsets... I think there won't be problem with shifter.. But it does not look like brake lever would fit... So what do you think??

DarkMonster620

#1
February 24, 2015, 06:46:58 AM
pics or link . . . would help
Carlos
I said I was smart, never that I had my shit together
Quote from: ducatiz on March 27, 2014, 08:34:34 AMDucati is the pretty girl that can't walk in heels without stumbling. I still love her.
"When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth."

DarkMonster620

#3
February 26, 2015, 04:35:29 AM
as per the seller they should fit (they do look like the ones I once had). . . try visiting ssr's web site, if they look the same and these are exactly the same, then pull the trigger . . . if not, try one of our sponsors . . .
Carlos
I said I was smart, never that I had my shit together
Quote from: ducatiz on March 27, 2014, 08:34:34 AMDucati is the pretty girl that can't walk in heels without stumbling. I still love her.
"When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth."

Slide Panda

#4
February 26, 2015, 07:20:56 AM
Yeah, I was just thinking these look like SSR clones.

The replace the stock and attach directly to the splined shaft for the shifter, so that's how they convert to GP shift. The catch is you lose the fine adjustment a threaded rod linkage gives you. Yes they do have the eccentric adjust for the toe  - but with single eccentrics, up/down adjustment also means fore/aft adjustment. 
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

mr.freezer

#5
February 26, 2015, 09:58:20 AM
I know that shifter will work... I am afraid of fitting brake lever... it is not curved as original...

DarkMonster620

#6
February 26, 2015, 11:47:21 AM
Quote from: mr.freezer on February 26, 2015, 09:58:20 AM
I know that shifter will work... I am afraid of fitting brake lever... it is not curved as original...
if not mistaken, shifter is long one, brake short one and it does have a curve . . .
Carlos
I said I was smart, never that I had my shit together
Quote from: ducatiz on March 27, 2014, 08:34:34 AMDucati is the pretty girl that can't walk in heels without stumbling. I still love her.
"When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth."

mr.freezer

#7
February 27, 2015, 02:33:57 AM
I know that short one is brake lever, but when I put pictures of original brake lever and this one side by side it seems not to look very similar... especially mounts for push rod and rod for brake switch...

DarkMonster620

#8
February 27, 2015, 02:59:22 AM
Quote from: mr.freezer on February 27, 2015, 02:33:57 AM
I know that short one is brake lever, but when I put pictures of original brake lever and this one side by side it seems not to look very similar... especially mounts for push rod and rod for brake switch...
Ok . .  in said case, as the saying goes "if in doubt, don't" . . . if these were the SSR ones I would then be 100% but your last comment has made me doubt . . .
Carlos
I said I was smart, never that I had my shit together
Quote from: ducatiz on March 27, 2014, 08:34:34 AMDucati is the pretty girl that can't walk in heels without stumbling. I still love her.
"When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth."

mr.freezer

#9
February 27, 2015, 11:08:10 AM
If SSRs would fit, these would fit too. 'cos these look exactly the same as SSRs

mr.freezer

#10
February 28, 2015, 12:54:15 AM
I have just received the answer from the seller, who wrote that it does not fit to Monster 620.. So guys... another question is, Where to find billet shifter and rear brake lever for stock rearsets??? or really cheap aftermarket rearsets..

DarkMonster620

#11
February 28, 2015, 05:31:28 AM
Quote from: mr.freezer on February 28, 2015, 12:54:15 AM
I have just received the answer from the seller, who wrote that it does not fit to Monster 620.. So guys... another question is, Where to find billet shifter and rear brake lever for stock rearsets??? or really cheap aftermarket rearsets..

SSR . . . . or try http://www.mc-motoparts.com/motorcycles-bike-model/ducati/ducati-monster-620-ie-2003-2006/?sort=featured&page=3
Carlos
I said I was smart, never that I had my shit together
Quote from: ducatiz on March 27, 2014, 08:34:34 AMDucati is the pretty girl that can't walk in heels without stumbling. I still love her.
"When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth."

mr.freezer

#12
February 28, 2015, 07:33:48 AM
I have searched.. I can not find any brake lever... shift lever are available everywhere... but no brake levers...  [bang]

DarkMonster620

#13
February 28, 2015, 08:12:32 AM
dont give up . . .
Carlos
I said I was smart, never that I had my shit together
Quote from: ducatiz on March 27, 2014, 08:34:34 AMDucati is the pretty girl that can't walk in heels without stumbling. I still love her.
"When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth."

DarkMonster620

#14
February 28, 2015, 08:17:49 AM
Carlos
I said I was smart, never that I had my shit together
Quote from: ducatiz on March 27, 2014, 08:34:34 AMDucati is the pretty girl that can't walk in heels without stumbling. I still love her.
"When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth."
Print
Go Up Pages1 2
User actions