every body's gotta have a build thread, an M900 story

Started by Pinion, November 29, 2015, 12:05:31 PM

Previous topic - Next topic

Pinion

Skins for the seat are in, I just want everyone to know, I didn't kill the buffalo, I just bought the hide
Will trade toilet paper for parts

Willthedub


SpikeC

Spike Cornelius
  PDX
   2009 M1100S Assorted blingy odds and ends(now gone)
2008 Bimota DB5R  woo-Hoo!
   1965 T100SC

xcanuc


Pinion

Will trade toilet paper for parts

Pinion

The Alpina's are coming, The Alpina's are coming  [bow_down]
Will trade toilet paper for parts

Pinion

Will trade toilet paper for parts

Pinion

#22
coils have arrived, and my new Ignitech programmable ignotor box has arrived, thanks to some great folks in NZ, not sure if I can give them cred here, but would love to
Will trade toilet paper for parts

Pinion

mmmmmmmmm..Alpina.......
All parts just about here, a couple by weeks end, a weekend of fabbing, then teardown. OOOOOOOOO... [drool]


Will trade toilet paper for parts

xcanuc


johnw138

 [clap]

Looking really good, you are building the bike im dreaming of!
I got a '94 900 monster as well, black sport classic wheels (not mounted yet).
Is this the headlight you are using?
http://www.ebay.com/itm/171958521783?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT




Pinion

Quote from: johnw138 on January 13, 2016, 08:09:32 AM
[clap]

Looking really good, you are building the bike im dreaming of!
I got a '94 900 monster as well, black sport classic wheels (not mounted yet).
Is this the headlight you are using?
http://www.ebay.com/itm/171958521783?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
looks the same, different vendor, nice price on that one though




Will trade toilet paper for parts

wataboy

Were the Alpina's a direct bolt-on? Specifically the front 17mm axle? Hope to have a set someday also on my '98. Enjoying this.

Yorkie


johnw138

Would you like to share the specs of your mods for the real wheel? The alpinas are 25mm front axle 25mm rear right?

Quote from: Pinion on January 14, 2016, 03:56:39 AM
17mm rear axle, front one side of fork will be milled out to accept 27mm end of new axle and a spacer will be made, rear a sleeve will be made and some modifications to caliper hanger.
I have offset rotors so calipers up front are fine. Not direct bolt on, a little moding