m1000s ie aftermarket headers available?

[Ohm3d]

I was looking at my exhaust when I was working on my bike this past weekend and noticed how the oem header/x-collector looks like it would restrict flow a lot.  Is there aftermarket options for this bike? It seems there are only slip ons available, which my bike already came with. I saw someone post "spaghetti header" for s4 in this section which is same era of bike, but not a match in terms of engine.  Bike has a ds1000 motor amd dual sided swing arm so options seem pretty slim.

[Howie]

Pretty sure you will need to scour the used market, never was much as far as I know.  An alternative to get some flow is cut open the crossover and modify.  Needless to say, this will not help with cornering clearance.

[kopfjäger]

http://www.stradafab.net/exhausts/

[Ohm3d]

Awesome.... so stock it stays I guess. Not spending 2 grand on an exhaust.

[koko64]

The oem headers are reportedly good for 90 odd hp. I have seen some crossovers opened up but was once told not to open them too much.
I had a 900 Superlight that had one channel each side opened not all four.

[bshinn]

I'm in the market for a stock M1000Sie header/collector. If anyone has a line on one please let me know.

Thanks

[Düb Lüv]

I'm in the market for a stock M1000Sie header/collector. If anyone has a line on one please let me know.

Thanks

i may have one from my 03 1000ds monster. ill have to check the condition.

[bshinn]

Thank you Sir!

[Ohm3d]

Im bringing this back from the dead as im about to build my motor. Im doing a 4mm over bore, 11.5:1 cr pistals, dp cams, headwork, new bearings... etc... so now with all this extra jam, i think the stock.header is gonna be restrictive
 Anyone got any recommendations?

.

[koko64]

I would enquire with our sponsors regarding brands like Spark, Sil Moto, Arrow, etc. That would be my first attempt.

I dont know if Termignoni made one, but if they did maybe a dealer might be able to track down NOS?

Directly contacting Staintune in Australia might be worth a try too. Although an older model pipe they have all the jugs and may build on request.