Some torque values, taken from the Haynes 2valve, '91 to '96, and LT Snyders, Vol. 1
Conversion calculator:
http://www.boltscience.com/pages/convert.htm or:
Ft.Lbs to Nm x 1.355
Nm to Ft.Lbs x 0.737
Alternator nut
270N\m with Loctite 128455 <valid for 2V/3V/4V and Testatretta
Panigale screw 160N\m with grease AGIP GR SM 2
MTS and DIAVEL 330N\m with Loctite 128455Alternator stator bolts 8-10 Nm
Brake banjo bolts 17-20 Nm
Brake caliper joining bolts 33 Nm
Cam belt pulley nuts on camshafts 70-75 Nm
Cam belt pulley nut on driveshaft 60-65 Nm
Cam belt driveshaft gear nut 40-45 Nm
Clutch housing, 900 and early 750 30-34 Nm
Clutch nut 137-147 Nm
Clutch hose union bolts 17-20 Nm
Connecting rod big end
1st stage 20 Nm
2nd stage 35 Nm
3rd stage 63.5-68.5 Nm
Crankcase bolts M8 23-25 Nm
M6 8-10 Nm
Cylinder head nuts
1st stage 15 Nm
2nd stage 30 Nm
3rd stage 900 w/ old studs 41-43 Nm
3rd stage 600/750 and
900 w/ new studs 38-40 Nm
Disc mounting bolts 26 Nm
Engine mounting bolts 40-45 Nm
Exhaust flange nut 23-25 Nm
Fork top bolt
Showa 35 Nm
Marzocchi 25 Nm
Front axle nut 70-76 Nm
Front axle clamp bolts 20-25 Nm
Front brake calipers 35-38Nm
Gear change pedal 23-25 Nm
Gear shaft bearing retainer bolts 8-10 Nm
Handlebar clamp 22-27 Nm
Low fuel level sensor 32-35 Nm
Oil drain 40-44 Nm
Oil pressure switch 18-20 Nm
Oil pump mounting bolts M8 23-25Nm
M6 8-10 Nm
Pick-up coils 4-6 Nm
Primary drive gear nut 110-120 Nm
Rear axle nut 70-76 Nm
Rear brake caliper 23-25 Nm
Rear brake pedal 23-25Nm
Rear shock Upper 39-44Nm
Lower 34-37 Nm
Rear suspension linkage arm
to frame bolt 34-37 Nm
Rear suspension linkage arm
to linkage fork bolt 34-37 Nm
Rear suspension ball joint
locknut to linkage fork 34-37 Nm
Rear suspension linkage fork
to swingarm bolt 22-24 Nm
Rear wheel axle nut 69-74 Nm
Spark plugs 29 Nm
Starter motor mounting bolts 8-10 Nm
Steering head nut 40-45 Nm
Swingarm pivot pin clamp 34-37 Nm
Top yoke pinch bolts M8 20-25 Nm
M10 35-38 Nm
http://www.boltscience.com/pages/convert.htm
