help get magic marker off my exhaust

Started by tristantumble, May 16, 2008, 07:07:33 AM

Previous topic - Next topic

tristantumble

I park my bike in my backyard, but i guess the neighbors kid thought it would be fun to draw on the lower part of my exhaust with black magic marker. Its on the tube before the main exhaust part. any tips of getting this stuff off? ugh.
07.695 (sold)
07. sport 1000 biposto

hypurone

NevrDull has always gotten everything off anything for me. Brasso is stronger/harsher but may be quicker. I recommend the NevrDull cuz it has never harmed any finish I was working on.  [thumbsup]
'07 S4RS "Testatretta" (In the FASTER color)
I'm not totally useless, I can be used as a bad example!

aaronb

If it is on the stainless just use some brake or carb cleaner. 
Milwaukee, WI
'07 s2r1k, '81 honda cb400t

hypurone

Quote from: aaronb on May 16, 2008, 07:16:25 AM
If it is on the stainless just use some brake or carb cleaner. 

He'll still most likely have to hit it with something else. Both of those failed to take some mystery gunk off my pipe (SS) completely.
'07 S4RS "Testatretta" (In the FASTER color)
I'm not totally useless, I can be used as a bad example!

Monstermash

I've been wallowing in my own chaotic and insecure delusions.



"Though I disagree with everything you say, I will defend to the death your right to say it."

johnster

You also may want to try one of those Mr. Clean "Magic Eraser" pads.....I am constantly amazed at what these things can clean and remove, most recently headlight lens fog-over and gunk....  [thumbsup]
2001 MS4; Full Termi w/airbox, ECU, SPS cams, CycleCat ClipOn Adapters, Apex clip-ons, CRG's, MW open clutch, Sargent Saddle, CF aplenty.. NOT RIDEABLE FOR A LONG TIME DUE TO MY STUPID LACK OF JUDGEMENT!!

mitt

I have had good luck with cheap drug store rubbing alcohol to get sharpie type permanent marker off.

mitt

ducducgooseme

super easy..  Mother's Billet Polish and a buffer...two seconds
If you love your bike, set it free.
If it comes back to you, you've
probably high-sided.

Slide Panda

Quote from: mitt on May 16, 2008, 07:48:56 AM
I have had good luck with cheap drug store rubbing alcohol to get sharpie type permanent marker off.

mitt

Get the 91% rubbing and that will probably take it off.  A lot of 'parmanent' markers ink are suspended in an alcohol mix and some other nasty stuff.  But as a result rubbing alch is a cheap effective way to get it out - works great on clothes.. ahem..
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

aaronb

To sum it up, any solvent you have on your shelf will take it off.   [thumbsup]
Milwaukee, WI
'07 s2r1k, '81 honda cb400t

ryandalling

Rubbing alcohol helped me get sharpie ink off the dry erase board. (Would help if I read the pen label before writing on it.  [bang]  )
Confused rider who doesn't know what he is even riding at the moment. (2012 URAL GearUp, 2012 Ninja 250 Racer, 1969 CB175 Racer)

c_rex

Barkeeper's Friend.  It's like Comet- which also might work. 
"It ain't cool being no jive turkey this close to Thanksgiving."


http://www.youtube.com/watch?v=OGkHHsoKRP8&eurl=http://www.usa-taekwondo.us/

TJR178

Gun cleaner.  Not for your exhaust, but for actually cleaning your gun after you polish off the neighbor kid.

mbalmer

Quote from: TJR178 on May 16, 2008, 10:03:49 AM
Gun cleaner.  Not for your exhaust, but for actually cleaning your gun after you polish off the neighbor kid.

[thumbsup] [thumbsup] [thumbsup]

Is it June yet?

Guaps

Quote from: TJR178 on May 16, 2008, 10:03:49 AM
Gun cleaner.  Not for your exhaust, but for actually cleaning your gun after you polish off the neighbor kid.

This brings up a good point - fixing this sucks, but making sure it doesn't happen again is the fun part.  If it was a kid with a marker, I'm going to assume it was a young kid, probably too young to read.  (if the kid is old enough to read and is drawing on your bike, I'm with TJR178)  I've found that loud, sudden noises scare the hell out of most small children.  Find out when the kid's nap time is, take your cans off, back that sucker up to his bedroom window and get the RPMs up to about 6,000. 

Take pictures and post them here.  Maybe even video. 
If you are not living on the edge, you are taking up too much room.