gage
|
|
« on: May 18, 2009, 06:31:05 PM » |
|
I checked all the normal sources and came up with nothing.
I will pay someone $5.00 if they can help me find the bolts listed below. For real.
My High pipes require the use of spacers which are about 16mm thick the spacers space out foot peg brackets. This takes away from the amount of bolt being threaded into the engine cases/frame mounts.
One of the bolts even pulled out when the bike was knocked over last year.
Here is what I need:
8mm x 1.25 shoulder diameter 12mm Shoulder Length 20mm Threaded Length: 30 or 35mm Head Diameter: 24mm could use a smaller one in combination with a washer if I have to
10mm x 1.5 shoulder diameter 12mm Shoulder Length 20mm Threaded Length: 40mm Head Diameter: 24mm could use a smaller one in combination with a washer if I have to
|
|
|
Logged
|
|
|
|
Slide Panda
|
|
« Reply #1 on: May 18, 2009, 06:39:47 PM » |
|
|
|
|
Logged
|
-Throttle's on the right, so are the brakes. Good luck. - '00 M900S with all the farkles - '08 KTM 690 StupidMoto - '07 Triumph 675 Track bike.
|
|
|
ducpainter
The Often Hated
Flounder-Administrator
Post Whore
Offline
Posts: 78265
DILLIGAF
|
|
« Reply #2 on: May 18, 2009, 06:58:09 PM » |
|
|
|
|
Logged
|
"Once you accept that a child on the autistic spectrum experiences the world in a completely different way than you, you will be open to understand how that perspective is even more amazing than yours." To realize the value of nine months: Ask a mother who gave birth to a stillborn. "Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent.”
|
|
|
gage
|
|
« Reply #3 on: May 18, 2009, 06:59:28 PM » |
|
Thread length is too short at only 16mm
|
|
|
Logged
|
|
|
|
gage
|
|
« Reply #4 on: May 18, 2009, 07:21:31 PM » |
|
It would appear that the contest is over. Provided these folks don't attempt to charge me hundreds of dollars. we'll find out tomorrow Congrats to Ducpainter!
|
|
|
Logged
|
|
|
|
|
gage
|
|
« Reply #6 on: May 18, 2009, 07:37:13 PM » |
|
Yeah I love that place but they were no help on these
|
|
|
Logged
|
|
|
|
Speeddog
West Valley Flatlander
Flounder-Administrator
Post Whore
Offline
Posts: 14813
RIP Nicky
|
|
« Reply #7 on: May 18, 2009, 08:06:21 PM » |
|
It would appear that the contest is over. Provided these folks don't attempt to charge me hundreds of dollars. we'll find out tomorrow
Congrats to Ducpainter!
Who says there's no free lunch.
|
|
|
Logged
|
|
|
|
gage
|
|
« Reply #8 on: May 19, 2009, 06:25:45 AM » |
|
$750!!!! Ok so that ain't gonna work. New plan: Long Hex head bolt: 10mm x 1.5 Metal Sleeve: OD 12mm ID 10mm Length 20 24 mm OD fender washer Think that will work?
|
|
|
Logged
|
|
|
|
Ddan
|
|
« Reply #9 on: May 19, 2009, 02:40:25 PM » |
|
It would appear that the contest is over. Provided these folks don't attempt to charge me hundreds of dollars. we'll find out tomorrow
Congrats to Ducpainter!
You didn't say anything about them being affordable, just that someone had to find them. You owe DP 5 bucks.
|
|
|
Logged
|
2000 Monster 900Sie, a few changes 1992 900 SS, currently a pile of parts. Now running flogged successfully NHMS 12 customized. Twice. T3 too. Ducati Monster Forum at www.ducatimonsterforum.org
|
|
|
He Man
|
|
« Reply #10 on: May 19, 2009, 03:28:45 PM » |
|
i think i may be able to get you some, there is a company here call fastenal that specialize in fasteners. I can ask for you if you like. just PM me the exact specs.
|
|
« Last Edit: May 19, 2009, 03:30:51 PM by He Man »
|
Logged
|
2006 Ducati S2R1100 Yea.... stunttin like my daddy CHROMED OUT 1100!!!!
Check out my Latest Video! 05/13/2017 :https://www.youtube.com/watch?v=P4xSA7KzEzU
|
|
|
gage
|
|
« Reply #11 on: May 19, 2009, 05:30:53 PM » |
|
You didn't say anything about them being affordable, just that someone had to find them. You owe DP 5 bucks. He told me to bring more Jerky to DIMBY
|
|
|
Logged
|
|
|
|
gage
|
|
« Reply #12 on: May 19, 2009, 05:40:40 PM » |
|
i think i may be able to get you some, there is a company here call fastenal that specialize in fasteners. I can ask for you if you like. just PM me the exact specs.
That's a very generous offer! I did check the fastenal website before posting this and unfortunately didn't have any luck. It would seem that a threaded portion of a should bolt makes up only 20% of that bolts overall length.
|
|
|
Logged
|
|
|
|
He Man
|
|
« Reply #13 on: May 19, 2009, 06:07:09 PM » |
|
Yea some of the stuff arent listed on their website, you have to go to their store (its 2 blocks from my house....i live in an industrial park)
|
|
|
Logged
|
2006 Ducati S2R1100 Yea.... stunttin like my daddy CHROMED OUT 1100!!!!
Check out my Latest Video! 05/13/2017 :https://www.youtube.com/watch?v=P4xSA7KzEzU
|
|
|
gage
|
|
« Reply #14 on: May 20, 2009, 02:58:13 PM » |
|
Yea some of the stuff arent listed on their website, you have to go to their store (its 2 blocks from my house....i live in an industrial park)
The specs are listed in the OP. I would prefer either stainless or hardened. THanks Again and Good Luck!
|
|
|
Logged
|
|
|
|
|