$5 to the winner Where can I get Shoulder bolts - Wierd sizes??

[gage]

I checked all the normal sources and came up with nothing.

I will pay someone $5.00 if they can help me find the bolts listed below. For real.

My High pipes require the use of spacers which are about 16mm thick the spacers space out foot peg brackets. This takes away from the amount of bolt being threaded into the engine cases/frame mounts.

One of the bolts even pulled out when the bike was knocked over last year.

Here is what I need:

8mm x 1.25
shoulder diameter 12mm
Shoulder Length 20mm
Threaded Length: 30 or 35mm
Head Diameter: 24mm could use a smaller one in combination with a washer if I have to


10mm x 1.5
shoulder diameter 12mm
Shoulder Length 20mm
Threaded Length: 40mm
Head Diameter: 24mm could use a smaller one in combination with a washer if I have to

[Slide Panda]

Bolt depot?

http://www.boltdepot.com/dimension.aspx?cc=68&cs=245&cm=23

[ducpainter]

http://www.rinomechanical.com/stainless-metric-shoulder-screws.htm

[gage]

Bolt depot?

http://www.boltdepot.com/dimension.aspx?cc=68&cs=245&cm=23

Thread length is too short at only 16mm 

[gage]

http://www.rinomechanical.com/stainless-metric-shoulder-screws.htm

It would appear that the contest is over. Provided these folks don't attempt to charge me hundreds of dollars. we'll find out tomorrow

Congrats to Ducpainter!

[Paegelow]

http://www.mcmaster.com/# also has just about everything

[gage]

http://www.mcmaster.com/# also has just about everything

Yeah I love that place but they were no help on these

[Speeddog]

It would appear that the contest is over. Provided these folks don't attempt to charge me hundreds of dollars. we'll find out tomorrow

Congrats to Ducpainter!

Who says there's no free lunch. 

[gage]

$750!!!!

Ok so that ain't gonna work.

New plan:

Long Hex head bolt: 10mm x 1.5
Metal Sleeve: OD 12mm ID 10mm Length 20
24 mm OD fender washer

Think that will work?

[Ddan]

It would appear that the contest is over. Provided these folks don't attempt to charge me hundreds of dollars. we'll find out tomorrow

Congrats to Ducpainter!

You didn't say anything about them being affordable, just that someone had to find them.  You owe DP 5 bucks.   

[He Man]

i think i may be able to get you some, there is a company here call fastenal that specialize in fasteners. I can ask for you if you like. just PM me the exact specs.

[gage]

You didn't say anything about them being affordable, just that someone had to find them.  You owe DP 5 bucks.   

He told me to bring more Jerky to DIMBY

[gage]

i think i may be able to get you some, there is a company here call fastenal that specialize in fasteners. I can ask for you if you like. just PM me the exact specs.

That's a very generous offer!

I did check the fastenal website before posting this and unfortunately didn't have any luck.

It would seem that a threaded portion of a should bolt makes up only 20% of that bolts overall length.

[He Man]

Yea some of the stuff arent listed on their website, you have to go to their store (its 2 blocks from my house....i live in an industrial park)

[gage]

Yea some of the stuff arent listed on their website, you have to go to their store (its 2 blocks from my house....i live in an industrial park)

The specs are listed in the OP. I would prefer either stainless or hardened.

THanks Again and Good Luck!