Cost to powder coat?

[damianS4RS]

Hey guys,
I'm looking to take some parts off my bike and have them powder coated but I was wondering if you could give me a general idea of cost? Do they charge per piece? Is it cheaper if it's all one color? Do I have to do any prep work on the pieces? I want to do my rearsets, passenger pegs, headlight ring and bracket and if I could figure out how to, my triples as well. Also if you happen to know a good one in S. Florida, even better!
Thanks!

[Cicero]

Powder coaters generally price by how much of a rack you take up, and what color.

Often times with small parts and common colors (i.e. black) they have racks that are not quite full that they can add your pieces to for cheap.

Media blasting should be included in the price.

I had a clutch cover done in black for 20 bucks.

A swing arm in Ti gray was coated for 70. Find a recommended one, or have a small test piece done by an unknown place before buying a full or half rack.

[hihhs]

I did both rearsets, kick stand, head light bezel, CW short tail, passenger pegs, & the weird wings that hold the passenger pegs, & the exhaust hangers all in black for $180. That seemed about right for where I live.

[ProTeal55]

Contact my Buddy Sean over at "The Powder Pro" --->

HTTP://WWW.THEPOWDERPRO.COM

He did all the coating on my Ducati (came out great).
Mention Half Fast CHicago and he will give ya deal

[pitbull]

I just had a frame and swingarm sandblasted and Powdercoated for $200

[ab]

I did both rearsets, kick stand, head light bezel, CW short tail, passenger pegs, & the weird wings that hold the passenger pegs, & the exhaust hangers all in black for $180. That seemed about right for where I live.

did that $$ include prep work ?

I think i got ripped off then.   

[He Man]

depends a lot on where you live. they have to pay for rent/property tax too.

Over here in NYC, the cheapest i could find for prep/powder on ONE 5spoke wheel was $150.

[Triple J]

I had a frame, 2 wheels, top and bottom triples, and a bunch of other smaller pieces coated (including media blasting and prep) for $350 here in Seattle. The frame was also a different color from everything else.

[MotoCreations]

Make sure when you are comparing prices you are comparing process/labor involved.

I've had wheels/frames in the past which I had coated FIRST in a thinner "primer" process.  Then the "color" process over the top of that.  Result is smoother transitions on factory frame welds.  (some shops do this as part of their "regular service" and billable -- some shops just coat as if it was an industrial fencepost in terms of quality finish desired)

Also I've had done THIRD coat overlays with light metallic in a clear powdercoat applied.

Other item is the cost of media used.  If you are doing standard colors ala 100% gloss, that is pretty standard.  But some of the shops I've used in the past will have a 65% gloss black or other oddball color combination available without having to special order media. (ie: they have it in stock)

Also remember with powdercoating, you can take a color sample to most good shops and they can forward to their supplier who have the matching spectroanalysis machines.  Custom mix colors aren't that expensive to do.  I think my worse bill was $55 to get an oddball gold color matched as well as a Ferrari red to perfection to other items already on the bike.

[dlearl476]

depends a lot on where you live. they have to pay for rent/property tax too.

Over here in NYC, the cheapest i could find for prep/powder on ONE 5spoke wheel was $150.

It also depends on the coater, and their overhead.  Here in Vegas I can get wheels done at a really nice building for $150/ ea or in a shed for $40, and just about every price in between.

[DrDesmo]

I had a grille on my volvo powdercoated for $20 bucks or so, including media blasting, it came out SWEET

 

Adam

[Rameses]

I had my rearsets, brake/shifter levers, passenger pegs and mounts, rear spring, rear suspension linkage, top and bottom triples, handlebar clamps, front fender mounts, and 2 heat shields done for $400.

The price included all prep work, even grinding down the casting lines on the triples and rearsets.

[damianS4RS]

Thanks everyone for the info. Now all I need is a weekend of tropical thunderstorms and a bonus check and off to the powder coaters!

[lazarus7]

damien, im in the tampa/ sarasota area,
and used www.paradisepowdercoating.com, local shop
talk to larry, see how backed up they are....
did passenger and operator rearsets/ pillions and a few small odds and ends for their minimum set-up price of $96....
came out perfect.

[jfisher2]

had my frame sand blasted for $25 at a local big rig paint shop...then powder coated for $90 at R Spoor Coatings in Endicott, NY.