What did you just buy for your Ducati?

[wannabfast]

its not that difficult except you need to pull the slave cylinder off, and adjust the chain afterwards, which could be tricky on a single sided swingarm

[scduc]

Its actually easier on a sssa. It is self aligning. But you should use the proper tool. It can be done with a long screwdriver but I do not recommend it.

[autoguy]

A carbon fiber seat cowl

[TitanMonsterS4R]

Begun collecting parts for the my winter upgrade-

Hypermotard Rear rim
Speedymoto SBK Monster Top Triple
Gilles Rearset (Black/Gold)
Gold Racing Stripe
53mm Woodcraft Clip-ons
EBC Bake Pads
Spiegler brake and clutch lines

[stopintime]

........

Gilles Rearset (Black/Gold)
.............

Which exhaust? I'm close to getting the Gilles myself, but have two reservations: they are ~ an inch less wide at the peg than stock/CycleCat - in itself a very good thing, but possibly problematic reg right side foot angle as the s-pipes will dictate an akward foot angle. Comments?

Also, I wonder if the pinch bolt on the rotating main bracket will be holding that thing in place when I bounce my 220 + gear lbs on them....

[AquariusII]

Ex box exhaust....hoping to get it in today or tomorrow...

[talljoker]

Had it for 3 weeks
-Tail Chop with smoked led tailight
-Emissions Gone-
-Mini zip ties cut all the big ugly ones-
-S2R front wind screen-
-ASV levers
-Pitbull stands
-Headlight bulb - trying to match the integrated license frame
-eBay mirrors - work need adjustment
-14 sprocket -
-New grips-
and the list will keep going...

[The ModFather]

Cycle-cat raised clip-ons, CF sprocket cover, new FF which will get the Dremel chop for shortening and shaping! Ordering Boom Tubes in Nov when Mark gets back.

[TitanMonsterS4R]

Which exhaust? I'm close to getting the Gilles myself, but have two reservations: they are ~ an inch less wide at the peg than stock/CycleCat - in itself a very good thing, but possibly problematic reg right side foot angle as the s-pipes will dictate an akward foot angle. Comments?

Also, I wonder if the pinch bolt on the rotating main bracket will be holding that thing in place when I bounce my 220 + gear lbs on them....

I've got them going on an S2R80 with an quat-d exbox.  Didn't even think about the potential problem with the S pipe.

[NateNewThread]

Arrow Darks!

up next:
Bars
Risers
....
....
??
...
Wheels?

[wannabfast]

which fender kit is that? i havent seen one like that before, is it the rizoma?

[NateNewThread]

which fender kit is that? i havent seen one like that before, is it the rizoma?

Rizoma, it is.

[wannabfast]

well if you dont have the passenger rearsets, you should totally ride with the cowl on.. completes the look

[NateNewThread]

well if you dont have the passenger rearsets, you should totally ride with the cowl on.. completes the look

I ride with the DP cowl bag on but took it off for the exhaust install for some reason.

[The ModFather]

  RIZOMA