Motogadget loom project

[ducatigirl100]

After a couple years of owning a monster I decided it was time to redeseign the atrocious electral loom 



the original loom/battery....   21.6 ponds

And heres the Motogadget bling 

M-unit and the motorcope tiny


The Button for controlling all the front switch (start, light, hi-beam, etc...)

[ducatigirl100]

Here my first draft of the connection ...  very basic

[Speeddog]

The Button for controlling all the front switch (start, light, hi-beam, etc...)

Is this a MotoGadget part?

I can't find it on their site..... 

[MAXdB]

Nice. Keep us updated!

[JohnEE]

Is this a MotoGadget part?

I can't find it on their site..... 

Here it is, it was hidden on the M unit page.

Interesting, it condenses the switch signals into a single bus/wire to make wiring easier....
I need to buy an extra loom to play around with... good luck ducati girl

[Speeddog]

Here it is, it was hidden on the M unit page.

Interesting, it condenses the switch signals into a single bus/wire to make wiring easier....
I need to buy an extra loom to play around with... good luck ducati girl

Thanks, JohnEE.

That's a very slick gizmo.

Eventually another stack of money to Motogadget......

[suzyj]

Hey, cool stuff!

[ducatigirl100]

Is this a MotoGadget part?

I can't find it on their site..... 

It's hidden in the "accesories" section  of the m-unit

[ducatigirl100]

M goodies are sweet.

Really nice attention to details .. really clean 

[ducatigirl100]

A little bit of crimping is involved 

[ducatigirl100]

70% complete     



Comparaison .... just to give you an idea old vs new




Plus .... there some rizoma bling that came in today .... tanks Jeff !!( Monsterparts

[monsta]

sweeet!    
this'll be my next mod, give us as much detail as you you've got time to give please.

even better, make me a loom while your at it and I'll pay ya!

are you going with the M-lock as well?  http://motogadget.com/en/electrics/rfid-ignition-lock-m-lock/m-lock-rfid-zundschloss.html

also...  would it be possible to get a higher res version of your wiring diagram?  Ta 

[ducatigirl100]

Yes I'll be using the Lock ....    there's a glass key the you can buy as an accessorie ... I'll put the glass key in my
helmet ... so when I'm gona put my helmet on the bike  while preparing myself........ the bike will come "alive"the instant I'll put my helmet  on it .........magic....


Sorry for the low resolution of the plan ....I add an accident whit it  
I'm wathing to finish the hole thing ,and I'll re do it   whit the final changes.
I decided to put an USB port (for my smart phone)  and a 12v  plug to wire my heated gloves also.

Sorry also for all the misspelling ... I'm french-canadian

[ducatigirl100]

The thing that I'm wandering is where to put it  

1-in front ... I'll be using pod filter but I could keep some of the airbox to put the electronics in it ( it would be super-clean.... no wire going around the bike...... )
or
2- in the middle where the old battery use to be
or
3'- make a "pan" under the seat like all the other cafe-racer

[Speedbeaver]

Keep up the good work Isa. Looking forward to go riding next summer!