1000ds FCR Build

[eyduc]

Not sure if it was answered, but tank did you fit?

[Düb Lüv]

i have a california cycleworks track tank.

[Real Recognize Real]

i have a california cycleworks track tank.

Is this the paintable version?

[Düb Lüv]

Is this the paintable version?

no, it's an older tank. i don't know what run it was from.

[krista]

no, it's an older tank. i don't know what run it was from.

That's OK. If it turns out the new ones are definitely paintable, we'll get you a replacement.

[Düb Lüv]

Well I thought I'd have something cool to show ya'll today but the seller mixed up my order and received this. He fixing the problem so that always good.

[Düb Lüv]

Received the correct toys today. It's sad that it took me sooo long to buy these.

Cnc'd stainless steel cam nuts
19mm hex nut
Reusable but thread locking material must be used

[koko64]

Where'd you get 'em from DL?

[Steve.In.Atlanta]

I just got back my parts I sent to fast frank racing and I was pretty blow away by the work he did. Especially on the gears. On the big primary he faced both side before machining the holes rather than just punchin some holes in it. Top notch work.

Clutch case cover
Before 4lbs 1oz
After 3lbs 8.6oz

Who did this and if you don't mind me asking, about how much?

[Düb Lüv]

Where'd you get 'em from DL?

http://bit.ly/191NtSZ

The guy is super nice. Actually fast shipping from England to the states something like 7 days.

[Düb Lüv]

Who did this and if you don't mind me asking, about how much?

Frank at fast frank racing in Greenville North Carolina.

http://shop.fastfrankracing.com/Vented-Clutch-Case-VCC.htm

You ship him yours and he performs the service.

[Düb Lüv]

I promise y'all I'm trying to get this thing done. Slowly chipping away at it. I found more engine treasures to buy. I really want to get this damn motor back together but keep finding more stuff.


Sbk oil pump vs. stock 1000ds oil pump. Sbk about a 1/3 thinner.

[krista]

Which SBK is that from? I recall conversations with Jim Davis (at Advance Cycles, formerly the tech at Nichols) about 748 oil pumps that needed some kind of machining to work correctly.

[Düb Lüv]

Which SBK is that from? I recall conversations with Jim Davis (at Advance Cycles, formerly the tech at Nichols) about 748 oil pumps that needed some kind of machining to work correctly.

This ones from an 848. I wanted to use as new of a sbk oil pump possible. Like a 1198, 1098, or the 848.

[krista]

Nice!