Ducati Monster Forum

Local Clubs => CAM => Topic started by: DRKWNG on June 16, 2010, 01:05:53 PM



Title: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on June 16, 2010, 01:05:53 PM
Just because I started 'jacking the sighting thread about my house hunting...

TA-DAH!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 17, 2010, 03:16:41 AM
you....you....you...instigator!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on June 17, 2010, 03:49:41 AM
Yeah.. hence my PM'ing you about the hunt and cutting off the thread jack. But thsi is a good notion... to collect all the random drek taht we usually toss in various other local threads


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 17, 2010, 04:17:09 AM
random...us?....neverrrrrrrrr!!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Geaux on June 17, 2010, 05:42:04 AM
Anyone have problems parking in the dirt and gravel at Merriweather?  Are there designated bike spots?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 17, 2010, 05:52:13 AM
Anyone have problems parking in the dirt and gravel at Merriweather?  Are there designated bike spots?

take a flattened 12oz can with you for your kickstand and you will be fine....they do not have designated motorcycle parking...but you can also park in a surrounding place and walk over as well...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on June 17, 2010, 06:37:49 AM
Anyone have problems parking in the dirt and gravel at Merriweather?  Are there designated bike spots?

A side stand puck fits in a pocket too or under the seat. Just remeber, keep your weight on the pegs and no front brakes - rear only on slipper shit like a gavel lot.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on June 17, 2010, 07:57:20 AM
Anyone have problems parking in the dirt and gravel at Merriweather?  Are there designated bike spots?

HEY!!! How are you?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Geaux on June 17, 2010, 09:32:14 AM
I'm good.  You?  What's this rumor about you washing CAM bikes in a bikini?   [moto]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on June 17, 2010, 09:47:41 AM
me?   in a bikini?  not so much...maybe shorts and bikini top....it's actually a benefit for Komen 3 day down in Winchester, VA, but it is at an  HD dealership - some friends have put it together for the Komen MotoCrew.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 17, 2010, 12:34:38 PM
you....you....you...instigator!!!

lol  Whatever. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 18, 2010, 12:51:04 AM
So, who knows of a good, trustworthy independent VW repair shop in the area?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on June 18, 2010, 02:42:45 AM
So, who knows of a good, trustworthy independent VW repair shop in the area?

Talk to Zooom -


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 18, 2010, 02:49:37 AM
Talk to Zooom -

I put this up in hopes he would respond.  ;)  He's at a dealership, right?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on June 18, 2010, 02:56:54 AM
Wholesale parts mgr at Martens.  He hooked me up with a great repair shop in Wheaton that just did some work on my 97 Passat.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 18, 2010, 03:08:43 AM
Cool then.  I need to get my GTI in for a full tune up some time soon.  Thanks.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 18, 2010, 03:11:52 AM
So, who knows of a good, trustworthy independent VW repair shop in the area?
I put this up in hopes he would respond.  ;)  He's at a dealership, right?

yeah man...I work at Martens Volkswagen in Bethesda...let me know the 411 and I can hook a brutha up...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 18, 2010, 03:15:36 AM
yeah man...I work at Martens Volkswagen in Bethesda...let me know the 411 and I can hook a brutha up...

Bethesda eh?  Well, seeing how my job will be in Bethesda for the first seven months or so...  ;)

I just need to get a full tune up (my VR6 turned 113K) and was looking for a decent place that was trustworthy.  I'm going to be living around the Shirlington area...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 18, 2010, 03:21:50 AM
Bethesda eh?  Well, seeing how my job will be in Bethesda for the first seven months or so...  ;)

I just need to get a full tune up (my VR6 turned 113K) and was looking for a decent place that was trustworthy.  I'm going to be living around the Shirlington area...

12V VR6 or 24V VR6?...what gen/year/model?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 18, 2010, 03:25:14 AM
12V VR6 or 24V VR6?...what gen/year/model?

12V unfortunately, and the last year of that gen I think.  It's a 2000 MkIV, GTI GLX 5spd.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on June 18, 2010, 03:30:06 AM
Oh great... now Zoom has someone to VW nerd out with... get a room!



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 18, 2010, 03:35:10 AM
12V unfortunately, and the last year of that gen I think.  It's a 2000 MkIV, GTI GLX 5spd.

oh, that ain't a bad one at all ( I like the 12V over the 24V personally when it comes to the 2.8 6's)...just slightly ooomph-ier than dolci's VR6 even though the overall MK4 chassis (FWIR) is a bit heavier than her B4...and the last of the 12V VR's in a GTi are the early 02's and they kept putting them in the Jetta Wagon's till '04....


Oh great... now Zoom has someone to VW nerd out with... get a room!



we are in THAT room!...LOL


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 18, 2010, 04:25:52 AM
Oh great... now Zoom has someone to VW nerd out with... get a room!

we are in THAT room!...LOL

;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tuanogus on June 18, 2010, 11:46:18 AM
Note to self: don't expect the contractors to show up during World Cup.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 18, 2010, 01:41:21 PM
WOOHOO!!!    :D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 21, 2010, 03:52:16 PM
Got the rest of my gear shipment in today.  Bike should be here Thursday.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tuanogus on June 21, 2010, 04:21:56 PM
Got the rest of my gear shipment in today.  Bike should be here Thursday.

There are excuses... and there are reasons... for calling in sick. Lemme know if you're up for a Friday spin.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 21, 2010, 04:50:03 PM
There are excuses... and there are reasons... for calling in sick. Lemme know if you're up for a Friday spin.

I probably will be, but it all depends on what I am able to suss out with the living situation.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on June 22, 2010, 03:34:22 AM
I've got some vacation that I need to eat up or loose in the near future. I'm planning to make some long weekends which would be perfect for some moto hookie


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 22, 2010, 11:07:15 AM
I hate itwhen people ride their bikes on thesidewalk.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on June 22, 2010, 11:22:20 AM
I hate itwhen people ride their bikes on thesidewalk.

Bikes or MotorBikes?

Back in Italy, when stuck in traffic I would sometimes ride my motorcycle on the sidewalk (if there were NO pedestrians) to get around cars


...


Good Times!  [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on June 22, 2010, 11:28:14 AM
I figure he means bicycles... though I did see some chick on a scooter on the sidewalks near the key bridge one time.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 22, 2010, 11:44:41 AM
Yea, I am referring to bicycles.  I have been a cyclist for a long time and always hate when cyclists go through so much to try and get accepted as a viable form of legitimate transportation only to see it get marginalized again by people riding on the sidewalk...

Now motorcycles on the sidewalk?  That's just [evil] and what riding a Super Duke is all about. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 23, 2010, 03:43:51 AM
Yea, I am referring to bicycles.  I have been a cyclist for a long time and always hate when cyclists go through so much to try and get accepted as a viable form of legitimate transportation only to see it get marginalized again by people riding on the sidewalk... 


what annoys me about bicyclists is the # of them that want to ride in the street and do and then disregard the laws of the street that they are subject to just as you and I are....like stop lights for example....they roll up through a pack of cars and then roll right through a red light instead of abiding by the law....and the kicker is this...if one of them ran through a light and got plowed into by oncoming traffic, the guy in the car would most likely get the ticket whereas if it were a car it would be the opposite.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 23, 2010, 05:54:57 AM

what annoys me about bicyclists is the # of them.

Damn man, don't hate.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Geaux on June 24, 2010, 04:11:40 AM
What about cagers who refuse to share the road with ANYTHING smaller than them, and have the mentality that instead of being in their way, bicycles belong on the sidewalk?  And they drive and park in designated bicycle lanes?  I think drivers, cyclists, scooterists, and pedestrians should all be put into a room and schooled on how to play nicely with each other (maybe even legally).


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 24, 2010, 04:20:07 AM
I think drivers, cyclists, scooterists, and pedestrians should all be put into a room and schooled on how to play nicely with each other (maybe even legally).

I'll agree with that.  One of the shortfalls to getting about in American cities is the utter lack of comprehensive education when it comes to operating (insert your vehicle of choice) around other vehicles. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Geaux on June 24, 2010, 07:01:24 AM
Plus not every rule is universal among the states, so when I visited or moved here I would've liked a list of things I'm supposed to do differently like put the cell on speakerphone and stop for pedestrians in crosswalks.  (what if they're crossing in the middle of the street?)  At a minimum I think the rental car places and DMVs should distribute a list of the state's driving laws when you rent a car or transfer your license.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on June 24, 2010, 07:33:15 AM
Plus not every rule is universal among the states, so when I visited or moved here I would've liked a list of things I'm supposed to do differently like put the cell on speakerphone and stop for pedestrians in crosswalks.  (what if they're crossing in the middle of the street?)  At a minimum I think the rental car places and DMVs should distribute a list of the state's driving laws when you rent a car or transfer your license.

Pedestrians are easy, I just downshift one or two and watch them run for their lives! [evil]

Seriously tho, it's a real problem for me when peds don't use the crosswalks or cross too quickly because I have to worry about not hitting them and also about not being hit by some distracted driver.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 24, 2010, 08:06:43 AM
Plus not every rule is universal among the states, so when I visited or moved here I would've liked a list of things I'm supposed to do differently like put the cell on speakerphone and stop for pedestrians in crosswalks.  (what if they're crossing in the middle of the street?)  At a minimum I think the rental car places and DMVs should distribute a list of the state's driving laws when you rent a car or transfer your license.

as far as the state's driving laws and a local flier when you rent a car not in your residential locale, I agree fully....

as far as a suppliment when you transfer your liscence, I think they expect you, as a new resident, to take the responsibility and initiative to read and understand the rules and regulations in the individual state's DMV/MVA/Yadda, at the time of transfer, and it is to be an understood acceptance of those differences and things you must know and acclimate to accordingly when you recieve your liscence in that state.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 24, 2010, 05:16:11 PM
Just in case someone has the day off tomorrow (friday) and wants to go for a ride...  I could stand to learn some good roads...

Just sayin'... 

  ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Geaux on June 25, 2010, 04:29:12 AM
I will be taking off a 1/2 day next Friday if anyone wants to... oh crap, so will all drivers, probably.  Well, let me know if you want to ride anyway and show me what you learned.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 25, 2010, 04:20:29 PM
Doinkersloot.  That is all.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: FatguyRacer on June 25, 2010, 04:39:44 PM
Wholesale parts mgr at Martens.  He hooked me up with a great repair shop in Wheaton that just did some work on my 97 Passat.

Wheaton eh? I wonder what they charge for a Mark 5 TDI T-belt job?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 29, 2010, 06:49:55 AM
Alright, my unaccompanied baggage is here and will be delivered next Wednesday.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: MadDuck on June 29, 2010, 08:09:03 PM
Alright, my unaccompanied baggage is here and will be delivered next Wednesday.

Does that mean a certain SD will arrive also?  [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 29, 2010, 11:05:43 PM
Does that mean a certain SD will arrive also?  [evil]

Nope.  That beast is coming with my house-hold goods, which should be here in a few weeks.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on June 30, 2010, 05:08:35 AM
MIGHT NOT BE SAFE FOR WORK, depending on your co-workers, bosses, etc...

Super Sexy CPR, everyone should know how to perform one: vimeo.com/moogaloop.swf?clip_id=11673844&server=vimeo.com&show_title=1&show_byline=0&show_portrait=0&color=f00018 (http://vimeo.com/moogaloop.swf?clip_id=11673844&server=vimeo.com&show_title=1&show_byline=0&show_portrait=0&color=f00018)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on June 30, 2010, 06:51:34 AM
Derby... that went up in NMC weeks ago.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 30, 2010, 06:53:45 AM
Yuu got Derby'd and then Derby's another....


life is just and good!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on June 30, 2010, 06:54:31 AM
All is balance... all is balance


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 30, 2010, 10:19:58 AM
Today was a beautiful day for riding!  [moto] Makes me never want to go back to work...ever!



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 30, 2010, 10:22:29 AM
Makes me never want to go back to work...ever!



Here here!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on July 01, 2010, 03:03:25 AM
Made the best of it and rode to work today. Not exactly carving the twisties... but way to nice to be stuck in a metro train.

And I said it over in the weekend ride thread.. but I'm playing hooky from work tomorrow (Friday) if anyone wants to come play with me.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 01, 2010, 04:07:46 AM
I'm playing hooky from work tomorrow (Friday) if anyone wants to come play with me.

When/where do you want to meet up?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on July 01, 2010, 04:54:43 AM
As you're the first person to put forth any interest, I hadn't really constructed much of a plan. I'll toss bout Best Buns for a cafe and it's right by fuel.. then roll west from there. We might want to wait a touch as it is a work day an we can let some traffic ebb.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tuanogus on July 01, 2010, 06:21:53 AM
I would join you but have an epic meeting tomorrow afternoon. If it's cancelled/rescheduled I'll ride. I'll send you a PM if that happens.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 03, 2010, 02:57:13 PM
Anybody have a pick up, or decent sized SUV and want to take it to Ikea? 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on July 03, 2010, 03:24:41 PM
When?  Which Ikea?'


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 03, 2010, 03:29:21 PM
When?  Which Ikea?'

Well, I kind of default to the one down in Woodbridge, as it is closest to me.  But I guess Ikea is Ikea, and all I need to do is find the stuff I am looking for in the warehouse.  I tried to buy a computer desk today, but the desk top was far too large to get into my VW.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 04, 2010, 03:07:06 PM
Cigar time.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tuanogus on July 06, 2010, 07:33:01 AM
WARM!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on July 06, 2010, 07:50:07 AM
That's the understatement of the day.  Triple digits is more than warm. But at least it's a dry heat right now...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 06, 2010, 11:21:50 AM
WARM!!!

Uhm, yea.

But at least it's a dry heat right now...

Dood, really?  You couldn't even tell where the surface of the lake was in Bethesda this morning on the way to work.  It was that humid.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on July 06, 2010, 12:21:14 PM
Right now was the operative part. This AM was humid as all get out.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 06, 2010, 03:43:28 PM
Let's have another beer, shall we?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tuanogus on July 06, 2010, 03:45:47 PM
Let's have another beer, shall we?

I cracked open a bottle of VA wine I purchased Sunday... Here's to next Tuesday! Cheers!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 06, 2010, 03:48:28 PM
I cracked open a bottle of VA wine I purchased Sunday... Here's to next Tuesday! Cheers!

I'm enjoying the last bottle of Raison D'Être right now.  Mighty tasty stuff with a nice kick.

  [beer]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on July 07, 2010, 11:22:42 AM
Hot dog! 4th street NW is finally being resurfaced by my place so I can get home without putting the duc in 4WD.  [moto] Now if they'll just get the 3rd street onramp to 395 redone...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on July 07, 2010, 12:32:37 PM
I'm enjoying the last bottle of Raison D'Être right now.  Mighty tasty stuff with a nice kick.

  [beer]


good stuff.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 07, 2010, 03:26:46 PM
For the record, Dogfish Head 90 Minute Imperial IPA is  [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Geaux on July 08, 2010, 03:51:29 AM
Milling and paving on 2 out of 3 lanes of 29W from Rosslyn this morning.  No warning signs as you're turning right from the Key Bridge, so watch for sudden stops and loose rocks.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on July 08, 2010, 03:57:35 AM
Didn't we used to have a road hazards conditions thread?  Maybe on TOB?

Maybe we spin that up again..


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 17, 2010, 12:01:57 PM
Got me some cigars, some bourbon and a tasty bottle of cabernet.  Looks like I'll be posting in the drunk thread before too long.  Anyone want to join in?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tuanogus on July 17, 2010, 01:17:55 PM
Got me some cigars, some bourbon and a tasty bottle of cabernet.  Looks like I'll be posting in the drunk thread before too long.  Anyone want to join in?

I'm working on it... [drink]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on July 17, 2010, 01:24:17 PM
Me three. A little dehydration makes the booze go a long way!   [beer] [beer]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on July 18, 2010, 04:14:13 AM
Got me some cigars, some bourbon and a tasty bottle of cabernet.  Looks like I'll be posting in the drunk thread before too long.  Anyone want to join in?

Which Bourbon did you get?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 18, 2010, 06:17:26 AM
Which Bourbon did you get?

I'm kind of a Woodford guy, and usually have a bottle on hand for recreational purposes.  It didn't really pair too well with the Patel that I smoked last night though.  Woodford does go amazing well with Cohiba Blacks!! 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on July 20, 2010, 10:04:24 AM
I always knew it, and now science is on my side: beer hydrates better than water (http://www.clevelandleader.com/node/3467)!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 20, 2010, 10:41:20 AM
HOORAY FOR SCIENCE!!!!   [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on July 20, 2010, 04:41:55 PM
Reminds me of one of my favorite shirts

"Beer: Science's secret ingredient"

Let it be known that science has one sole function: to make better beer! Who cares if you have cancer as long as you have good beer!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on July 29, 2010, 08:32:04 AM
Whew! Made it in the door just as the downpour started.  [thumbsup]

Time to write an exam and watch a movie... [popcorn]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 30, 2010, 08:14:17 AM
The stupidity machine has arrived.  That is all.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on July 30, 2010, 08:59:25 AM
The stupidity machine has arrived.  That is all.

I will see you tomorrow then?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on July 30, 2010, 10:04:55 AM
The stupidity machine has arrived.  That is all.

military logistics screwed the pooch yet again?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 30, 2010, 10:29:09 AM
military logistics screwed the pooch yet again?

Well yea, but that was yesterday.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on July 30, 2010, 10:38:17 AM
Well yea, but that was yesterday.


well...I thought it was everyday actually...



I keeed I keeed!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 01, 2010, 06:20:26 PM
Does anyone here wear a size ten shoe/boot and need a pair of riding boots?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 01, 2010, 06:30:01 PM
Depending on the boot, I wear a 10 and would love to have something other than my hiking boots to ride in.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 02, 2010, 03:33:00 AM
Ok, they're yours if you want them.  They're a pair of Sidi Strada Evos and are about two years old, but still in great shape. 

All I will ask is for a round (or two) of drinks at one of the meets.  ;) 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 02, 2010, 04:30:27 AM
Cool. I hope they fit.



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on August 02, 2010, 04:33:08 AM
if not...I'll take second dibs.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 02, 2010, 08:49:56 AM
Do any of the moto shops around here carry Silkolene or Motorex oil/lubricants? 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on August 02, 2010, 09:17:21 AM
I usually get full synth Mobil 1 from advance auto. Don't know about the rest.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 03, 2010, 04:38:42 PM
Boots.fit.perfect! Thanks, Ben!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 04, 2010, 02:52:30 AM
Boots.fit.perfect! Thanks, Ben!

Glad they worked out for you.   [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tuanogus on August 06, 2010, 11:27:11 AM
Just passed the 24 hour mark without power. Beer is still cold, but not sure for how much longer.

Down the street crews are working on a pole that snapped in half... Took a few things out... Like the neighbor's car.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 06, 2010, 11:36:55 AM
Dood!!  I'll keep the beer cold for you.  :D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: MongoReturns on August 06, 2010, 12:01:36 PM
GW Prkwy looks like a freakin war zone today.  Strafing runs by those big prop planes with all the guns on the sides.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tuanogus on August 06, 2010, 02:14:57 PM
GW Prkwy looks like a freakin war zone today.  Strafing runs by those big prop planes with all the guns on the sides.

They're coming for you, Mongo!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on August 19, 2010, 02:30:10 AM
Scottish scientists develop whisky biofuel, full story online here (http://www.guardian.co.uk/environment/2010/aug/17/whisky-biobuel-scotland). Now why doesn't this surprise me?

Next thing a joint French-Italian team will pull something out of wine while the Russians will run off Vodka -- or just get drunk and claim they do. ;)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on August 19, 2010, 04:15:42 AM
Reminds me of the recent Top Gear discussion about how car manufacturers are being hit with fleet average emissions regs. Super car makers like Ferrari have no issue, becuase they are owned by a larger car maker... but there was speculation about Pagani... I'll praprahse:

'What'll a small company like Pagani do? They aren't owned by anyone who makes economical cars'
'Well, their Italians... so they'll lie. (Insert bad mock Italian accent here) Howa many carbons is better? Ah, less? Yes... then this Zonda here, she makes one carbon. Good, yes?'

On the other hand Aston Martin has made this abortion
http://www.astonmartin.com/eng/thecars/cygnet (http://www.astonmartin.com/eng/thecars/cygnet)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on August 19, 2010, 04:31:47 AM
Scottish scientists develop whisky biofuel, full story online here (http://www.guardian.co.uk/environment/2010/aug/17/whisky-biobuel-scotland). Now why doesn't this surprise me?

 

call them Revenuer's to raid the Moonshine stills that ran them origiobnal NASCARS!....it isn't new to run a car on whisky...but glad it is being put forth over ethanol!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 19, 2010, 04:35:17 AM
Cygnet = "Smart" car with very fancy (and expensive) hood ornament


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on August 19, 2010, 08:38:02 AM
hence the 'abortion' comment... Smart cars are horrible... Ever take one for a test drive?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on August 19, 2010, 08:44:48 AM
Took a fun little jaunt last night after a few tweaks on the bike and found a lot of debris on the back roads from the rain. Plenty of washout and the occasional limb down. Shiny side up my friends.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 19, 2010, 01:27:59 PM
hence the 'abortion' comment... Smart cars are horrible... Ever take one for a test drive?

I have, and it actually wasn't that bad.  Granted, it was in Europe and I was driving the diesel model.  Was kind of cool to look down at the display and see an indicated 86 mpg. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on August 20, 2010, 01:24:39 AM
I'll drive a Smart car.....AFTER is has had the motor removed and a Hyabusa motor put in it!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on August 20, 2010, 03:02:05 AM
If the Diesel gets that much MPG, oh that's a win. But the gasoline model gets about the same mileage as a civic.

You didn't think the brakes were crap and the 'manuMatic' transmission was total pants?

Seen that video of the 'busa Smart car... fine it's got mroe go... but hte one I test drove... the brake were shit shit shit... you'd never stop!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on August 20, 2010, 03:07:50 AM
If the Diesel gets that much MPG, oh that's a win. But the gasoline model gets about the same mileage as a civic.

You didn't think the brakes were crap and the 'manuMatic' transmission was total pants?

Seen that video of the 'busa Smart car... fine it's got mroe go... but hte one I test drove... the brake were shit shit shit... you'd never stop!

Brembo brake upgrade!?!?!?!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on August 20, 2010, 04:34:35 AM
I'll drive a Smart car.....AFTER is has had the motor removed and a Hyabusa motor put in it!

I'll drive a Smart car......AFTER it gets an 1198 engine AND full termis on it! ;)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on August 20, 2010, 05:43:59 AM
I'll drive a Smart car......AFTER it gets an 1198 engine AND full termis on it! ;)

I've seen an old old Fiat 500 with a 999 motor in it and custom exhaust...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tuanogus on August 20, 2010, 01:00:55 PM
Just wondering... Has anyone heard from ducrider45 lately? He might be interested in some of these MD rides.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on August 20, 2010, 02:04:04 PM
sharkskinz came in.  race stay on its way and then we'll be ready for some track fun again.  woo hoo.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on August 21, 2010, 03:37:14 PM
sharkskinz came in.  race stay on its way and then we'll be ready for some track fun again.  woo hoo.
So do you have pics o da skinz ?

Are these for the imaginary 748 ?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 21, 2010, 03:52:46 PM
Are these for the imaginary 748 ?

No kidding.  Without pics to prove otherwise, this mythical bike of yours is actually a hallucination from a night of mezcal fueled madness. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 22, 2010, 04:17:59 AM
So, with today's forecasted showers, one is lead to wonder.  Does Maryland still have power?   ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on August 22, 2010, 04:55:58 AM
So far, so good f-er! ;D :D

We are however taking Miles to the dog park in Arlington and checking out an F 350 in Falls Church.

 In monkey county  we are whittling down the deficit by making dog owners pay a $40 per year dog park "user fee".


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 22, 2010, 05:00:13 AM
We are however taking Miles to the dog park in Arlington and checking out an F 350 in Falls Church.

I've actually been pricing a few trucks lately.  Chevy is offering STOOPID pricing on their 1500s when you go through USAA.

In monkey county  we are whittling down the deficit by making dog owners pay a $40 per year dog park "user fee".

One more reason why Virginia is better.   :D

Although there does seem to be a log of other taxes going on down here...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on August 22, 2010, 05:04:22 AM
I am lobbying to make the transition across the stream.  She is on board!

You should buy my Avalanche!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 22, 2010, 05:05:32 AM
You should buy my Avalanche!

Nah.  Those things are silly.   [cheeky]

Besides, I want a bed that I can get the bike in.  The A's is too short, isn't it?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 22, 2010, 12:04:01 PM
So WTF happened to the "all day of thunderstorms" that kept me from riding today?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on August 22, 2010, 12:09:54 PM
So WTF happened to the "all day of thunderstorms" that kept me from riding today?
 

I just got back from a quickie and got hosed.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 22, 2010, 12:25:39 PM
Can't blame me for this one, Lars!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 22, 2010, 01:37:29 PM
I just got back from a quickie and got hosed.

Pervert!






  ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on August 23, 2010, 02:43:08 PM
Nah.  Those things are silly.   [cheeky]

Besides, I want a bed that I can get the bike in.  The A's is too short, isn't it?

That is crazy talk my good man. 

My bike fits back there beautifully!  Have yet to try two but I'm sure that could work.  They are goofy looking, Ill give you that but it is one versatile mofo!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 28, 2010, 08:33:32 AM
Ok, next weekend's a long one.  Anybody with a mountain (or cyclo-cross) bike feel like riding out to Harpers Ferry on the C&O trail?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on August 28, 2010, 10:33:01 AM
Starting where?  Whites Ferry?  Hell Yeah!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 28, 2010, 11:15:40 AM
Where's that?  I was thinking of starting somewhere close to work, or around Glen Echo.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 31, 2010, 11:22:36 AM
Wow! I'm gonna tell you I love life some days. Took a couple hours off to go for a modified Lars-less Lars run and made it back in time for my meeting tonight.  ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on September 01, 2010, 02:57:18 AM
Ben, I found the right pickup for you: http://www.topspeed.com/cars/toyota/2009-toyota-tundra-ducati-transporter-ar66476/picture271798.html (http://www.topspeed.com/cars/toyota/2009-toyota-tundra-ducati-transporter-ar66476/picture271798.html)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 01, 2010, 11:05:08 AM
I had seen those before, well online that is, and while nice, they cost just as much (iirc) as the Desmo!   :o

Besides, it's the wrong color.  ;)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on September 03, 2010, 06:07:14 AM
Wait, so when did Massimo become a queen?



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 03, 2010, 06:32:48 AM
Wait, so when did Massimo become a queen?



I am more curious as to why?!?!?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on September 03, 2010, 07:17:54 AM
Well ... why not?  ;D

Possibly for the same reason I've worn a mankini at a pool party, or ran around wearing a girl's dress (after I pushed said girl in the pool) ... fun times [laugh] [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 03, 2010, 07:51:16 AM
so, does this mean you are going to dress like this for Halloween?

(http://www.pianificando.it/images/maschere-carnevale-regina-di-cuori-avanti.jpg)

http://cgi.ebay.com.sg/SEXY-COSTUME-DA-REGINA-DI-CUORI-PER-CARNEVALE-/380223981915 (http://cgi.ebay.com.sg/SEXY-COSTUME-DA-REGINA-DI-CUORI-PER-CARNEVALE-/380223981915)

;)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on September 03, 2010, 07:58:29 AM
so, does this mean you are going to dress like this for Halloween?

(http://www.pianificando.it/images/maschere-carnevale-regina-di-cuori-avanti.jpg)

http://cgi.ebay.com.sg/SEXY-COSTUME-DA-REGINA-DI-CUORI-PER-CARNEVALE-/380223981915 (http://cgi.ebay.com.sg/SEXY-COSTUME-DA-REGINA-DI-CUORI-PER-CARNEVALE-/380223981915)

;)
That just reminded me of the Alice In Wonderland costume party I went to with a few friends when the movie came out [laugh] [laugh]

....

No, I wasn't dressed as the queen of harts (or Alice), it was already taken  :'( I ended up dressing like a retarded Tweedle Dee


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 04, 2010, 02:57:55 PM
 :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o

YOWZA!!

Josh Brookes @ Cadwell Park (http://www.youtube.com/watch?v=rYx9DoYhCIU&feature=player_embedded#normal)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on September 04, 2010, 04:43:11 PM
:o :o :o :o :o :o :o :o :o :o :o :o :o :o :o

YOWZA!!

Josh Brookes @ Cadwell Park (http://www.youtube.com/watch?v=rYx9DoYhCIU&feature=player_embedded#normal)
Been there, done that.   [coffee]

For the  gun lovers out there,  heres a funny comparison of the AK47 vs the AR 15 vs the Mosin-Nagant

www.mouseguns.com/compare.htm (http://www.mouseguns.com/compare.htm)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 10, 2010, 02:06:56 PM
Been posted elsewhere, but it's just too good not to share.  ;)

http://www.twitvid.com/Q41DB (http://www.twitvid.com/Q41DB)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on September 12, 2010, 01:17:07 PM
Got a post in tech :( any tech minded cammers please have a look.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 13, 2010, 07:14:31 AM
Thinking about going for a ride in a bit, anyone else off work?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on September 13, 2010, 07:19:24 AM
Thinking about going for a ride in a bit, anyone else off work?
Count me in!

...

Oh wait, I'm 600 miles away, next time.  :'(


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on September 13, 2010, 07:26:30 AM
Sheesh. Don't you guys have jobs?!?  ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on September 13, 2010, 07:29:07 AM
Sheesh. Don't you guys have jobs?!?  ;D
That's exactly why I'm here. Conf room in an ugly Holiday Inn outside Louisville playing around with RFID.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 13, 2010, 07:30:32 AM
Sheesh. Don't you guys have jobs?!?  ;D

Sure do.  But I took two days of leave so the property management could come replace my kitchen floor.  Well, they're done.   [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 13, 2010, 07:32:40 AM
Got a post in tech :( any tech minded cammers please have a look.

FOR THE LAZY make the beast with two backsERS LIKE ME...

http://ducatimonsterforum.org/index.php?topic=42520.0 (http://ducatimonsterforum.org/index.php?topic=42520.0)

personally...I am thinking the grounds also...I am sure you are going to check the battery to see where the voltage is as well...be worth checking the connections to the battery as well...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: MongoReturns on September 13, 2010, 09:21:03 AM
Thinking about going for a ride in a bit, anyone else off work?

Bah just got back from a short hop to the mall.  The one with the big buildings, not the one that sells chineese crap.  Gets all traficky around here post 3pm.  Dang gov't workers, freeloading on my tax dollars.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on September 16, 2010, 10:52:47 AM
Rain (and the serious threat thereof) SUCKS!!!!!

Well, back to work.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 17, 2010, 12:19:10 PM
Really missing my old S2000 right about now...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on September 18, 2010, 02:39:24 PM
I should be prohibited from going to DucPond EVER.AGAIN!!! Starts putting crazy ideas in my empty space. [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 18, 2010, 02:40:24 PM
I should be prohibited from going to DucPond EVER.AGAIN!!! Starts putting crazy ideas in my empty space. [evil]

HA!!!  Did you  notice some of the older bikes that Donnie had up on the wall in the back?   :o


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 18, 2010, 02:40:41 PM
Time for wine!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on September 18, 2010, 02:43:54 PM
HA!!!  Did you  notice some of the older bikes that Donnie had up on the wall in the back?   :o

 [drool] I was like Pavlov's dog! [drool]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 18, 2010, 02:45:54 PM
[drool] I was like Pavlov's dog! [drool]

Hey, that's my line!  ;)

Watching FP1 for the weekends GP at the moment...   [wine] [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on September 18, 2010, 02:49:12 PM
Trade you a chick on a gixxer for it! [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 18, 2010, 02:49:55 PM
Trade you a chick on a gixxer for it! [evil]

Thought you were trying to score some meth for her?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on September 18, 2010, 02:51:37 PM
Rejected! She had all her teeth! ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 18, 2010, 02:53:04 PM
Rejected! She had all her teeth! ;D

Very true, very true...

BUT, you did have the chance to trade her off to that mountain man.  You might have gotten some good quality scrapple up there!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tuanogus on September 18, 2010, 03:20:22 PM
Very true, very true...

BUT, you did have the chance to trade her off to that mountain man.  You might have gotten some good quality scrapple up there!

Ya! I got a little nervous there in Paw Paw. That dood sounded serious about us leaving her behind.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 18, 2010, 03:21:28 PM
He'd "been up in the mountains all week", couldn't you tell?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on September 18, 2010, 03:26:50 PM
At least he wasn't spitting out movie quotes: "Hey boy, you got a pretty mouth." ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 19, 2010, 02:21:43 AM
In case people didn't know, there is a MotoGP/MAD BBQ out at DucPond today. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on September 19, 2010, 09:04:48 AM
Sure is quiet around here. Shoulda gone to Duc Pond... :(


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 19, 2010, 12:49:03 PM
Shoulda gone to Duc Pond... :(

Yep.  ;)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on September 19, 2010, 01:59:53 PM
While I enjoyed being at the pond, the depression that follows ,due to wifular restrictions,is only lessened by the pain in my ass.

There is only so much 2-wheeled porn one can take, and motoporn overload can easily happen due to the ogulation that goes on.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 19, 2010, 02:08:04 PM
So she put you in your place did she?  I thought you TOLD her.    ;)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tuanogus on September 19, 2010, 02:12:18 PM
1st and 3rd on the podium. How appropriate to be out at DucPond.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Geaux on September 19, 2010, 02:13:26 PM
What's it like looking at [moto]porn with a bunch of your dude friends?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 19, 2010, 02:17:14 PM
1st and 3rd on the podium. How appropriate to be out at DucPond.

DUDE!!!!  I didn't watch the race out there!  Don't post stuff like that without a great big SPOILER tag!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on September 19, 2010, 02:18:45 PM
What's it like looking at [moto]porn with a bunch of your dude friends?
It is like looking at static displays of bikes and parts of bikes that you cannot justify or use to their full extent without release.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tuanogus on September 19, 2010, 02:26:02 PM
DUDE!!!!  I didn't watch the race out there!  Don't post stuff like that without a great big SPOILER tag!

Consider yourself spoiled.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on September 19, 2010, 02:28:48 PM
DUDE!!!!  I didn't watch the race out there!  Don't post stuff like that without a great big SPOILER tag!

Is that a make the beast with two backsing joke? You rode all the way out there and didn't watch the race?!? You're helmet must tight, cuz your brain ain't quite thinking right!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on September 19, 2010, 02:46:13 PM
There is entirely too much shit too look at. How could anyone watch a race when there is a hand made ti frame nearby??   2 desmo's were there,  all kinds of one-off stuff and then to top it off M-make the beast with two backsin V's.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 19, 2010, 02:51:42 PM
No, no joke.  Too many people were talking to actually pay attention to the race.  I've got a subscription to motogp.com, so planned on watching it tonight anyhow.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 19, 2010, 04:57:11 PM
Ian?  Really?

(http://i192.photobucket.com/albums/z53/b_upton/facepalm/wow.gif)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on September 20, 2010, 02:22:16 AM
Trying too hard there man... trying too hard.



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 20, 2010, 02:36:19 AM
YEAH, and besides...I said to dolci and my sister that I'd resist watching the race at the Pond so I could watch with them....and I did later...and got the Munchkin to watch too....was some good racin!


BTW...Lars and Julie...1st..once again I want to apologize for a couple things...the 2 misdirected turns I made...the not as twisty and interesting route as I would have liked or normally may have taken...my left turn signal not working(and not realizing it) and my lardass-choppy-maybe-not-as-fast-as-I might-have-normally-ridden lead today out to the pond and back...

Lars...WTF happened to you taking 15 back towards home?

I fixed my left turn signal BTW, took the damn bike all apart and put the 2 freaking wires that pulled out of connection back into connecting into the tail harness again...now all functions as it should...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 20, 2010, 02:38:48 AM
tuanogus delete his account or did he get deleted or what?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on September 20, 2010, 03:29:55 AM
tuanogus delete his account or did he get deleted or what?

wasn't us.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on September 20, 2010, 03:34:12 AM
While you kids were running around the set of Deliverence I was up in northern Carroll, Baltimore, and Harford counties for a few hours yesterday mapping out a route for before the Viva Italia show on the 26th at Rash Field in Baltimore.

Other than a few spots that picked up some gravel the route is amazing. Lots of tight stuff, some really scenic views, and for the most part fresh pavement. Was anyone going to Viva Italia from this crowd or are you all going to the Mid-Atlantic Italian show?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 20, 2010, 04:21:17 AM
Sheperdstown for me...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on September 20, 2010, 09:45:02 AM
Zoom,  I don't know what I did but I ended up back on 28 and knew where it went ,so that's how I got home.


While you kids were running around the set of Deliverence I was up in northern Carroll, Baltimore, and Harford counties for a few hours yesterday mapping out a route for before the Viva Italia show on the 26th at Rash Field in Baltimore.

Other than a few spots that picked up some gravel the route is amazing. Lots of tight stuff, some really scenic views, and for the most part fresh pavement. Was anyone going to Viva Italia from this crowd or are you all going to the Mid-Atlantic Italian show?

Good , I will be there.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 20, 2010, 10:56:46 AM
Trying too hard there man... trying too hard.

  [laugh] [laugh]

Saw it in another thread and just couldn't help myself.  ;)

tuanogus delete his account or did he get deleted or what?

Wow!  I sent him a pm asking him to delete the post about the podium at the race, but wow.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Geaux on September 20, 2010, 03:27:40 PM
Did the police rodeo happen this year?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on September 20, 2010, 03:58:53 PM
Yeah a bit ago. It's part of national police week


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 22, 2010, 02:18:15 PM
So it rained today, do our brothers and sisters in Maryland still have power?
 [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on September 22, 2010, 02:26:20 PM
........kicked on and off a couple dozen times......saw at least 4 flashes from transformers blowing.  No generator necessary.




yet.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on September 22, 2010, 02:37:55 PM
Just a little thunder and wind so far here.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 22, 2010, 02:38:29 PM
God hates Maryland...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on September 22, 2010, 02:48:22 PM
I don't really hate it...I just don't like it very much! [evil] ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 23, 2010, 01:27:08 AM
I didn't have any power problems...and made more room in the garage last night...eventually, I'll be able to park all the bikes inside without an issue whatsoever!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on September 23, 2010, 02:05:11 AM
I didn't have any power problems...and made more room in the garage last night...eventually, I'll be able to park all the bikes inside without an issue whatsoever!

4 bikes, an 8+ foot fully stocked bar and bar stools - what more do you need?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on September 23, 2010, 02:32:37 AM
4 bikes, an 8+ foot fully stocked bar and bar stools - what more do you need?
Big @$$ TV screen showing motorcycle races non-stop! Duuuuuuh! [cheeky]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 23, 2010, 02:43:12 AM
4 bikes, an 8+ foot fully stocked bar and bar stools - what more do you need?


some at an old house I lived at would say ( and they did build) a stripper pole ....but we have no need for such silly things....

Big @$$ TV screen showing motorcycle races non-stop! Duuuuuuh! [cheeky]

that's upstairs....55" big enough?









now a kegerator on the other hand......


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 26, 2010, 07:37:46 AM
And the sun comes out...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on September 26, 2010, 11:22:37 AM
And the sun comes out...
... and it moons you  [cheeky]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 26, 2010, 12:42:37 PM
Bought some of those Vibram five finger running shoes a few weeks ago, after my physical therapist said they would probably help my back.  Well, I'm almost ready to stick a knife in her.  DAMN these things are killing my legs!!    [thumbsdown]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on September 27, 2010, 08:04:37 AM
Bought some of those Vibram five finger running shoes a few weeks ago, after my physical therapist said they would probably help my back.  Well, I'm almost ready to stick a knife in her.  DAMN these things are killing my legs!!    [thumbsdown]

My girlfriend is a PT, if there is one thing I have learned is that sometimes there are incredible amounts of pain along the path to feeling better.

Quick story.

I just bought a house back in April, and she was helping me with some yard work. I have back pain pretty often and she has been helping me with it. After a long day of digging out weeds, my back was killing me. I figured I might as well take advantage of an in house PT and asked her for a back rub. What I forgot to specify was whether I wanted it to feel good NOW or LATER. She went at my back with force that only a lumberjack on PCP could achieve. From a 5'5" girl that weighs MAYBE 120 lbs I didn't know what hit me. He poked, prodded, and pounded for maybe fifteen minutes. I'm pretty sure she climbed up on the bedposts, slapped her arm, and dropped an Atomic Elbow at one point. I'm man enough to admit that it make the beast with two backsing HURT.

An hour later I had absolutely zero back pain and went for a run later that night. She's my little miracle worker/voodoo princess and frankly she scares the living crap out of me.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 27, 2010, 09:25:56 AM
    she scares the living crap out of me.

as she should!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on September 27, 2010, 09:29:17 AM
He poked, prodded, and pounded for maybe fifteen minutes.
Hmmmm "He" or "She"?? Does she transform into the Hulk when it comes to giving a massage?  [cheeky]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on September 27, 2010, 09:47:26 AM
HULK MASSAGE!

No... that just doesn't work.

Different topic - for anyone needing a new battery and looking to shed some bike pounds, gotta say speed cells are the way to go. Mine arrived and it's stupidly light. Basically on par with a decent sized naval orange. Pound for pound (besides getting a lighter rider) it's got to be the, or one of the cheapest ways to dump some dead weight from a bike.



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 27, 2010, 10:05:23 AM
aren't those Speedcells stupidly expensive though?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on September 27, 2010, 11:16:11 AM
aren't those Speedcells stupidly expensive though?
MotoWheels has one called the superbike (http://www.motowheels.com/italian/mySearchResult.cfm?parentcategoryid=&productID=6814&showDetail=1&categoryID=915|Batteries%20and%20Battery%20Accessories&vendoridtodisplay=0&filterFor=speedcell&collection=) at 1lb 6.9oz ($250) and the SS (http://www.motowheels.com/italian/mySearchResult.cfm?parentcategoryid=&productID=6815&showDetail=1&categoryID=915|Batteries%20and%20Battery%20Accessories&vendoridtodisplay=0&filterFor=speedcell&collection=) at 12.1 oz ($160). Although Motowheels recommends the SuperBike battery and not the SS for our bikes, so it's 250 monkeys to save about 7 & 1/2 lbs :-\

Then again, I do throw away money at a lot of shite, so this wouldn't be the worst  :-[ :-[


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on September 27, 2010, 11:27:34 AM
Hmmmm "He" or "She"?? Does she transform into the Hulk when it comes to giving a massage?  [cheeky]

Well I guess I should come right out and say it... since you'd eventually figure it out and I'd like to save the awkwardness in the future but guys I'm......













... a terrible typist. Not that there is anything wrong with that.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on September 28, 2010, 08:07:48 AM
Ready for some serious vertigo?

(http://www.youtube.com/watch?v=uhtgsAXmz7U) (http://www.youtube.com/watch?v=uhtgsAXmz7U)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on September 28, 2010, 08:30:35 AM
Bought some of those Vibram five finger running shoes a few weeks ago, after my physical therapist said they would probably help my back.  Well, I'm almost ready to stick a knife in her.  DAMN these things are killing my legs!!    [thumbsdown]

But how does your back feel?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 28, 2010, 11:05:29 AM
But how does your back feel?

Don't know just yet.  Haven't been able to run enough to tell if there will be any significant difference.

Ready for some serious vertigo?

(http://www.youtube.com/watch?v=uhtgsAXmz7U) (http://www.youtube.com/watch?v=uhtgsAXmz7U)

F THAT!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on September 29, 2010, 02:13:04 AM
I am an astronaut trying to deal with a caveman! [bang] [bang] [bang]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 29, 2010, 02:31:40 AM
I am an astronaut trying to deal with a caveman! [bang] [bang] [bang]

better than being a scientist trying analyze a compost heap while the garbage man is trying to dump a load!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 29, 2010, 01:57:42 PM
Time for another  [wine] and a cigar...   [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on September 29, 2010, 02:58:00 PM
Time for a 3rd 16 ouncer.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 29, 2010, 02:59:20 PM
Time for a 3rd 16 ouncer.

Mickey's Big Mouth?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on September 29, 2010, 03:51:34 PM
Not much better than a properly poured Jack and Coke in a 32 oz tumbler.......


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on September 30, 2010, 04:38:57 AM
Mickey's Big Mouth?

He is from that part of MD... a little bit more north, though,  and it'd have to be a Natty Boh, Hon...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on September 30, 2010, 06:34:10 AM
Traffic on the 495 -> 270 Northbound route SUCKED last night . Turned on the radio too late to find out about the accident. Of course can't complain, it more than sucked for the kids and bus driver.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 30, 2010, 06:41:48 AM
Traffic on the 495 -> 270 Northbound route SUCKED last night . Turned on the radio too late to find out about the accident. Of course can't complain, it more than sucked for the kids and bus driver.

I was on the bike trying to painfully work my way up MacArthur BLVD all the way up.....man did that suck....I should hopped on the bike path and been a rebel without applause!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on September 30, 2010, 06:57:34 AM
He is from that part of MD... a little bit more north, though,  and it'd have to be a Natty Boh, Hon...

You give me a Boh and a crabcake and I'm pretty sure I'd let you sleep with my sister.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 30, 2010, 07:14:17 AM
You give me a Boh and a crabcake and I'm pretty sure I'd let you sleep with my sister.

wow...that's all it takes...what would I get for a 12 pack and 2 crabcakes?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on September 30, 2010, 07:15:18 AM
wow...that's all it takes...what would I get for a 12 pack and 2 crabcakes?

I look great in heels.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 30, 2010, 07:17:30 AM
I look great in heels.

and a lil black dress with fishnets and a white apron?!?!!?...LOL


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on September 30, 2010, 07:23:05 AM
Well, black IS slimming.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on September 30, 2010, 08:09:19 AM
Well, black IS slimming.
So that must be all you wear  [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on September 30, 2010, 08:14:30 AM
Why do you think I bought a black bike?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 30, 2010, 09:06:54 AM
So that must be all you wear  [laugh]

well...he said he was only JUST going through a Goth phase....LOL


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on September 30, 2010, 09:36:41 AM
Why do you think I bought a black bike?
Because it makes you look slimmer?  [cheeky]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on September 30, 2010, 09:44:25 AM
I cut myself working on my bike so that I can feel SOMETHING (and because some of those edges are friggin sharp).


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on September 30, 2010, 01:01:51 PM
Just opened my third Monkey County "Safe Speed" ticket for $40 within two days.  The worst part is, the cars are in my name and I didnt do the speeding!!  Tickets were dated 09.10.10 and 09.11.10.  Two yesterday, one today.

I cringe at what the next two weeks will bring.... [bang]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on September 30, 2010, 01:04:14 PM
I own a match .22LR, a very big scope, and am not afraid to break a few laws in the name of justice. I'll shoot Big Brother's eye out keed!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on September 30, 2010, 01:07:30 PM
Its time to mount the hitch haul on all my vehicles but I like the way you think!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on September 30, 2010, 01:54:33 PM

I cringe at what the next two weeks will bring.... [bang]

Time to sell the wife...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on September 30, 2010, 01:59:55 PM
Fifty bucks is all it'll take........






just tell me who to make the check out to....


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 30, 2010, 03:17:45 PM
Fifty bucks is all it'll take........






just tell me who to make the check out to....

 [laugh] 

I would take you up on that deal, but I bet she quit cooking breakfast with the au-pair moved in. 

 [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 30, 2010, 03:58:57 PM
Got more sticks in the mail, and the humidor won't hold them all.  Looks like it's time to grab a  [drink] and get to smokin...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on September 30, 2010, 04:46:00 PM
I think its time for you to commission a custom Humidor!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on September 30, 2010, 04:47:36 PM
[laugh] 

I would take you up on that deal, but I bet she quit cooking breakfast with the au-pair moved in. 

 [laugh]

I consider myself lucky when she throws me a cereal bar as I leave for work!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 30, 2010, 04:47:54 PM
I think its time for you to commission a custom Humidor!

And let me guess, you just happen to know a crack smoking redneck carpenter who is looking to do it, right?  


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on September 30, 2010, 05:02:15 PM
I Loves me some quality Crack!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 30, 2010, 05:04:08 PM
Well, get to carpentering then!  

Smoking has been put on hold due to the fact that the chairs on my balcony are soaking wet...   [thumbsdown]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 30, 2010, 05:16:18 PM
Just opened my third Monkey County "Safe Speed" ticket for $40 within two days.  The worst part is, the cars are in my name and I didnt do the speeding!!  Tickets were dated 09.10.10 and 09.11.10.  Two yesterday, one today.

I cringe at what the next two weeks will bring.... [bang]
I own a match .22LR, a very big scope, and am not afraid to break a few laws in the name of justice. I'll shoot Big Brother's eye out keed!

you guys got it all wrong....a simple night time guerilla mission of a good smear of some sticky grease lubricant like HHS2000 from WURTH on the camera lenses....walk up...spray...smear with nitrile glove covered hand and keep on walking!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on September 30, 2010, 05:17:53 PM
Me like!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on September 30, 2010, 05:29:14 PM
I was thinking about cleaning the lenses with some 80 grit sandpaper.  Id never do that because it would be illegal.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on September 30, 2010, 05:32:40 PM
When I lived in England, the most seen way to deal with them was to just walk up from behind, and give them the old reach around with a can of Krylon.   [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on September 30, 2010, 05:33:58 PM
I was thinking about cleaning the lenses with some 80 grit sandpaper.  Id never do that because it would be illegal.

hence why I suggested something not irreversible...but enough that it hinders the effectiveness of the capture process, even if just temporarily!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on September 30, 2010, 05:37:48 PM
Maybe substitute the grease with poo.......


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 01, 2010, 02:43:46 AM
Yay! The sky's not falling. I can swing by and pick up the [moto] that goes with my stock parts!!!!!!!!!!!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on October 01, 2010, 04:41:05 AM
Other than a damp basement and a lawn chair that has gone AWOL, the house made it through. Even took the bike to work this morning.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on October 01, 2010, 04:52:04 AM
Glad you made it through unscathed.  I thought about the bike this morning but my sinuses are hurting and I"m sneezing and I figured putting my head into a helmet was probably not the best idea right now.   ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on October 01, 2010, 11:25:01 AM
Well , my house flooded and I now have to remove the flooring ,trim and maybe some drywall,  fookin blows.

 Insurance covers nothing [puke] [bang] [puke] [bang] [drink] [drink] [drink]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on October 01, 2010, 11:25:58 AM
Statefarm is lucky I do not prefer jailfood and penis.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 01, 2010, 11:26:50 AM
Sorry to hear that, Lars! Insurance companies generally suck!! especially when it comes to floods. Bastards!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on October 01, 2010, 11:29:32 AM
You should drown your sorrows in a heaping helping of riding tomorrow morning.

Also, my services are available with notice to replace carpet, drywall, trim, etc. I work for beer and good cooking. But mostly beer.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on October 01, 2010, 11:41:24 AM
Lars...duuuuuuude...that fooookin sucks donkey balls and I am so sorry...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 01, 2010, 12:07:14 PM
line at the dmv sucks but they sure as hell move fast when they want to go home  >:(


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on October 01, 2010, 12:11:38 PM
Well , my house flooded and I now have to remove the flooring ,trim and maybe some drywall,  fookin blows.
Sorry to hear about that! +1 on riding, helps your mood!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on October 01, 2010, 12:55:38 PM
some basement water from the groundwater on the highside of hte house but we got rid of most of it by hammer drilling three holes in the cinder block and running garden hoses to the basement shower drain.  GALLONS per minute.   Still up all night dealing with the rest of it.  No damage other than to sleep.   Whatever leaked by simply runs out the back door and down to the canal.

Set an alarm for every hour to go retie lines on the boat.  Water came just over our lower deck at 2 am.   It's 5 feet lower now.

so tired but no damage so not as bad off as Lars.  Lars, drinks are on me.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 01, 2010, 01:38:26 PM
Well , my house flooded and I now have to remove the flooring ,trim and maybe some drywall,  fookin blows.

 Insurance covers nothing [puke] [bang] [puke] [bang] [drink] [drink] [drink]

F!!!  I was just about to send you a message to see how things went last night.  Really sorry to hear that the water got so high where you are. 

Let me know when it's time to start getting things done out there.  In cases like this, I'll work for bad jokes... 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on October 02, 2010, 04:08:35 AM
Thanks everyone, I will more than likely done with demo today.

Enjoy the Dem-hoing at DP.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 02, 2010, 02:40:13 PM
Why are people on metro so stupid?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 02, 2010, 09:03:57 PM
MV rep confirmed to me today that the new F3 IS going to be a 675 triple.   [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 03, 2010, 04:04:39 PM
No spoiling here, but if you haven't seen today's MotoGP race, and don't have access to see it, let me know.  It was a cracker!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on October 04, 2010, 03:11:15 AM
MV rep confirmed to me today that the new F3 IS going to be a 675 triple.   [evil]

http://hellforleathermagazine.com/2010/10/giovanni-castiglioni-on-the-mv-agusta-f3-harley-davidson-and-two-secret-new-models/ (http://hellforleathermagazine.com/2010/10/giovanni-castiglioni-on-the-mv-agusta-f3-harley-davidson-and-two-secret-new-models/)

On the F3

“The design of the bike, I have to say, It’s really unique, but it has a family feeling of an MV. The engine is really different from the competitors because it is full ride-by-wire; it’s completely new and has more performance. At the bench, we are now around 137bhp, so we think we can reach 140. This will be the first three-cylinder that is completely electronic, completely ride-by-wire and there are some specs in the engine, that our engineers will need to tell you about, that are different from the others.”

“The F3 will be the smallest bike that’s ever been produced in this category. It’s like a 125.”

“At the moment, we’re finishing our engineering and prototyping. The engine already did 70,000 miles without any problems. We have good results of reliability and good results of performance. Let’s say that we have done 90 percent and now have 10 percent to go. Production will start in October of next year.”

“The pricing is already decided. The price will be €11,500, which is in direct competition with the rivals [the 128bhp Triumph Daytona 675 retails for €11,590 in Italy]. There is a small premium because an MV is a rich bike, but with all the competition between €10,500 and €11,200, we’re not far above. It is a really competitive price for an MV.”

“For the American Market? To be competitive in the US we will have to sell the bike around $12,000 and that makes it difficult because, with the dollar still going down, it is very difficult for us to be profitable in the country. Almost impossible.”



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on October 04, 2010, 05:22:57 AM
Wouldn't surprise me if MV dropped off a Daytona 675 engine at Ferrari and told them: "like this, but better!"  [cheeky]

Tested the eye-blinding jacket today, and I have to say  [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 05, 2010, 03:41:25 AM
Brrrrrrrrrrrrrr!!!!!!!!!!!!!!!!!!

[moto]

Brrrrrrrrrrrrrr!!!!!!!!!!!!!!!!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 05, 2010, 02:14:00 PM
A bit chilly this morning, was it? 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on October 05, 2010, 02:31:40 PM
A bit chilly this morning, was it? 

jest a tit bit nipply!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 05, 2010, 02:45:58 PM
jest a tit bit nipply!

(http://i192.photobucket.com/albums/z53/b_upton/facepalm/Spock-Kirk-Vulcan-Nipple-Pinch.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on October 05, 2010, 04:34:29 PM
A bit chilly this morning, was it? 
I was just fine, nice and warm, thank you!  [moto] [moto] [moto] [moto]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 05, 2010, 04:39:26 PM
Figures you would be in your center of the sun coat! :) I think it took about 15 minutes for my fat to warm up when I got to work. [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 05, 2010, 04:47:02 PM
I was just fine, nice and warm, thank you!  [moto] [moto] [moto] [moto]

So I guess that jacket is pseudo wind-proof?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on October 05, 2010, 06:20:18 PM
still not as good as a heated liner though!...


I loves me my heated gear!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 05, 2010, 06:25:12 PM
Yea...  I've been putting some serious thought into that.  Need to look into getting some electrical leads set up on the KTM.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on October 05, 2010, 06:33:39 PM
Yea...  I've been putting some serious thought into that.  Need to look into getting some electrical leads set up on the KTM.

easy as pie....



well...I guess that might also depend on how hard it is to access the battery...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 05, 2010, 06:35:56 PM
What type of pie?    ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on October 05, 2010, 06:37:45 PM
What type of pie?    ;D

sweet potato.....you are in the South after all shuga!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 06, 2010, 03:15:32 PM
 [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 09, 2010, 04:37:58 PM
Who would have known that Afghans tasted so good? 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 09, 2010, 04:56:38 PM
Who would have known that Afghans tasted so good?  

Did Dharmah fix herself some dinner while you were gone?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 09, 2010, 04:57:57 PM
Nah, I just popped down to the local and got some kofta.   [thumbsup]

Did Darmah fix herself some dinner while you were gone?

Fixed.   :D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 09, 2010, 05:13:59 PM
I stand corrected...as does my post above. My apologies to the little lady.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 09, 2010, 05:15:41 PM
I stand corrected...as does my post above. My apologies to the little lady.

Did Dharmah fix herself some dinner while you were gone?

[bang]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on October 10, 2010, 10:37:57 AM
Finally it lives! Been a bit of a hassle but the 900 is back on the road. Too bad I don't have tomorrow off to go play :(


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 10, 2010, 04:47:41 PM
I absolutely cannot wait to see what Vale and JB are able to do with the Desmo in the next two years.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 10, 2010, 04:49:45 PM
Finally it lives! Been a bit of a hassle but the 900 is back on the road. Too bad I don't have tomorrow off to go play :(

There's always the weekly meet-up!...and next weekend is supposed to be beautiful also.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on October 10, 2010, 05:39:49 PM
There's always the weekly meet-up!...

And you can check out Jim's new Power Ranger outfit!

(http://stevebacon.org/images/PwrRanger.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 11, 2010, 02:30:06 AM
Don't forget my Super Silverizer with blaster and blade modes:
(http://upload.wikimedia.org/wikipedia/en/5/52/SilverRangerSuperSilverizer.jpg)
and here, you can see my silver cycle in action!
Power Rangers in Space - Silver Cycle (http://www.youtube.com/watch?v=3OE9bMRbyjk#normal)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on October 11, 2010, 02:50:38 AM
"Embedding disabled by request", boooo [thumbsdown] [thumbsdown] [thumbsdown]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 11, 2010, 03:02:44 AM
"Embedding disabled by request", boooo [thumbsdown] [thumbsdown] [thumbsdown]
Well, ain't that some shit! Wasn't by my request... ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on October 11, 2010, 04:39:59 AM
There's always the weekly meet-up!...and next weekend is supposed to be beautiful also.

Last few weeks have been madness. Travel for a couple weddings and all the associated time jam ups. So I dumped some of the free time I did have into sorting out what the hell had gone wrong with my bike. Turns out it was just the battery had gone around the bend - but it did it in really odd way that made diagnosis a little difficult.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on October 11, 2010, 05:57:11 AM
Turns out it was just the battery had gone around the bend - but it did it in really odd way that made diagnosis a little difficult
+1 for the small issues that take a bit to figure out! [thumbsup]

So are you going to stop snobbing us and come hang out with the the 8) crowd now?

[laugh] [cheeky]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on October 11, 2010, 06:00:24 AM
Is there a plan for this week?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 11, 2010, 06:04:57 AM
Is there a plan for this week?

Not yet.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on October 13, 2010, 06:23:57 AM
Noooooo!

http://www.washingtonpost.com/wp-dyn/content/article/2010/10/12/AR2010101206905.html (http://www.washingtonpost.com/wp-dyn/content/article/2010/10/12/AR2010101206905.html)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on October 13, 2010, 06:28:53 AM
Noooooo!

http://www.washingtonpost.com/wp-dyn/content/article/2010/10/12/AR2010101206905.html (http://www.washingtonpost.com/wp-dyn/content/article/2010/10/12/AR2010101206905.html)

well...just make sure you flush that crap when you are storing for the winter and be glad your SS has a metal tank....



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on October 13, 2010, 06:46:11 AM
storing for the winter
What is that you speak of? I have never heard such blasphemous talk before!


 [laugh] [laugh] [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on October 13, 2010, 06:47:34 AM
Behold - Bacon happy hour!

http://diningindc.net/2010/10/12/a-preview-of-bacon-week-october-14-21-at-restaurant-3/ (http://diningindc.net/2010/10/12/a-preview-of-bacon-week-october-14-21-at-restaurant-3/)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 13, 2010, 08:13:59 AM
If you like bacon happy hour, you should check out:

http://www.cochon555.com/home.php (http://www.cochon555.com/home.php)

 [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon]

Yeah it's a little excessive....5/2/2011!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on October 13, 2010, 08:15:39 AM
Behold - Bacon happy hour!

http://diningindc.net/2010/10/12/a-preview-of-bacon-week-october-14-21-at-restaurant-3/ (http://diningindc.net/2010/10/12/a-preview-of-bacon-week-october-14-21-at-restaurant-3/)

looks like they have a small patio outside and could be a reasonable idea for next week's CAM meet....Bacon Ice Cream sounds quite delish right now...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on October 13, 2010, 10:03:58 AM
Just saw the thread (and horror pics) about the new Ducati Diavel ( == 'devil' in Bologna dialect) and well ....  [puke] [puke] [puke]

I didn't really like the lines of the 999 and had some reserve about the Multistrada. But beginning with the 'new' Multi and now this new turd.... In some photos it almost looks like a maxi-scooter, while in others it reminds me of a V-max, meh whatever. I'll get a Guzzi next.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on October 13, 2010, 10:14:29 AM
Awesome - another metric cruiser; just what the market needs. That and Ducati needs more ugly bikes in the line-up.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on October 13, 2010, 10:29:03 AM
I'll get a Guzzi next.

I believe the expression is, "fucati".


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 13, 2010, 01:13:37 PM
looks like they have a small patio outside and could be a reasonable idea for next week's CAM meet....Bacon Ice Cream sounds quite delish right now...

What day works best for folks?  I'll make reservations?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on October 13, 2010, 05:35:42 PM
What day works best for folks?  I'll make reservations?

Not Thursday night. Any other night, though.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on October 13, 2010, 05:39:09 PM
Wife just instructed me to buy her the new KTM Duke 125.

(http://farm5.static.flickr.com/4108/5054280976_83256a3f38.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 13, 2010, 05:51:50 PM
I vote for Wed again next week. Bacon on hump day can't be beat!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 13, 2010, 06:00:35 PM
Wednesday it will be then.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 15, 2010, 12:29:15 PM
Who's got a pickup truck I can borrow?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on October 15, 2010, 12:34:09 PM
Who's got a pickup truck I can borrow?

Ben, is this an emergency? If so I have access to a truck in Arlington and Culpepper. But it's a "I wrecked and need a tow" kind of thing. Don't want to abuse.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 15, 2010, 12:37:35 PM
Oh no, nothing of the sort.  Just need something to haul a tv/stereo stand that I'm going to buy.  I'm tired of looking at the boxed up home theatre system in my living room.   


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on October 15, 2010, 12:42:01 PM
K, Pheeww. I have a Jeep GC if you think it'll fit.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 15, 2010, 01:30:53 PM
It might...  Actually, it should with the seats folded down...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on October 15, 2010, 02:25:58 PM
It might...  Actually, it should with the seats folded down...

PM sent.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on October 18, 2010, 06:18:58 AM
Oh no, nothing of the sort.  Just need something to haul a tv/stereo stand that I'm going to buy.  I'm tired of looking at the boxed up home theatre system in my living room.   

I have a Subaru Baja....I put all kinds of shit in the bed of my lil trucklet!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 19, 2010, 04:33:58 PM
For whoever it was (Jim maybe) that was talking about needing new gloves...

Sportbiketrackgear has certain colors of the Held Phantoms on closeout pricing. 

Just saying...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 19, 2010, 05:00:22 PM
I snagged a pair of those and they arrived on Friday. Used them to ride to Philly and back this weekend. Amazing how much warmer my hands were. Luv'em!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on October 19, 2010, 05:32:48 PM
Wife just instructed me to buy her the new KTM Duke 125.

(http://farm5.static.flickr.com/4108/5054280976_83256a3f38.jpg)

IF you need someone to run it in for her... you know, make sure it's safe and all... I'll be happy to donate my time.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on October 20, 2010, 08:33:44 AM
 ;D

I'm hearing mixed messages about this thing making it to the US now. :(


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 20, 2010, 04:53:53 PM
Ya know, some days SUCK!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on October 20, 2010, 06:41:55 PM
Ya know, some days SUCK!

Uh oh.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 21, 2010, 02:47:08 AM
Ya know, some days SUCK!

What's up?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on October 21, 2010, 03:21:31 AM
Uh oh.
What's up?
Just another day with too much to do, too little time to do it, and a faculty meeting thrown in for fun torture. [bang] [bang] [bang] [bang] [bang] [bang] [bang]

Today will be better!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: MongoReturns on October 21, 2010, 05:38:44 AM
Having nothing really better to do today, I guess I'll true up my mountain bike wheel.  Ran straight into a hug Capitol curb last week.  Forks bent too, but not much I can do about those.  If anybody has some big-frame sized MB suspension forks laying about, let me know.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on October 21, 2010, 07:15:34 AM
I've got a pair of new (read: use, not model year) XC Marzocchis that I'm willing to let go of (make an offer). The steer tube has been cut to fit a small'ish frame, so we'll have to take a look-see.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: MongoReturns on October 21, 2010, 08:04:35 AM
I've got a pair of new (read: use, not model year) XC Marzocchis that I'm willing to let go of (make an offer). The steer tube has been cut to fit a small'ish frame, so we'll have to take a look-see.

I think I left my spoke wrench in 1991.  Whoa those things cost almost as much as my bike!  Don't think they'd work anyway, my frame's XL 23.5".  But thanks!  Wheel trued good enough for gov't work, seems to work fine, forks look bent about 1.5" back, but they work.  I would've destroyed suspension forks with the hit I took, and gone down.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 21, 2010, 02:49:51 PM
Lars?

(http://www.motorinfo.hu/galeria/2011triumph_daytona675r/triumph_daytona675r_01.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on October 21, 2010, 07:46:32 PM
Wow - that Daytona is nice!

How about a radical Ducati? http://www.bikeexif.com/radical-ducati (http://www.bikeexif.com/radical-ducati)

(http://www.bikeexif.com/wp-content/uploads/2010/10/radical-ducati-5.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on October 22, 2010, 05:26:58 AM
Wow - that Daytona is nice!

How about a radical Ducati? http://www.bikeexif.com/radical-ducati (http://www.bikeexif.com/radical-ducati)

I love their style! It's like they rid the bike of all the superfluous crap and bring out the old school beauty through simplicity. [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on October 22, 2010, 12:23:58 PM
Lars?

(http://www.motorinfo.hu/galeria/2011triumph_daytona675r/triumph_daytona675r_01.jpg)
Svenska Boingers?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on October 22, 2010, 12:25:49 PM
Wow - that Daytona is nice!

How about a radical Ducati? http://www.bikeexif.com/radical-ducati (http://www.bikeexif.com/radical-ducati)

(http://www.bikeexif.com/wp-content/uploads/2010/10/radical-ducati-5.jpg)
To make a Duc as badass as that, it would naturally has an ST2 motor. [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on October 22, 2010, 01:27:29 PM
Winter mod shopping has begun, starting with the exhaust and tail tidy.

And while I wait for the goods to arrive, a few boring items showed up today...

(https://lh5.ggpht.com/_e7HHAaIyjqI/TMH-kzUMDJI/AAAAAAAABOw/RSr4fv2aoQ8/s400/IMG00172.jpg)

A used, not-warped, rear rotor from ebay. And a crappy snap of

(http://lh6.ggpht.com/_e7HHAaIyjqI/TMH-k-dNKsI/AAAAAAAABO0/ymqVOJga5GA/s288/IMG00175.jpg)

a lightweight front sprocket @ 14T. Rear sprocky and chain might make it tonight. The rear wheel is coming off and, hopefully, it's back on by Sunday AM.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 22, 2010, 01:51:08 PM
Uhm...  What did you get a new rear rotor for?  Yours wasn't worn out already, was it?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on October 22, 2010, 03:01:16 PM
Uhm...  What did you get a new rear rotor for?  Yours wasn't worn out already, was it?

No, not worn out. But it's been slightly warped for several thousand miles. I didn't really need to replace it, but I saw this used one for a steal.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on October 23, 2010, 02:42:11 PM
Got that darn emissions canister off today and, in the process, shed some more useless plastic and hoses. Also got a wicked loud horn installed after relocating a few things. Still waiting for the chain and rear sprocket to show.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on October 28, 2010, 03:21:49 AM
on a different note...anyone ever find out what or why Tuanogus blipped off the way he did?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on October 28, 2010, 03:42:33 AM
on a different note...anyone ever find out what or why Tuanogus blipped off the way he did?

That guy was such a douche. I still ride with him, though.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on October 28, 2010, 04:45:33 AM
That guy was such a douche. I still ride with him, though.

I heard he secretly found a stash of Jimmy Hendrix special kitty litter and was lost in a Hunter S Thompson fantasy land looking for something he would never find...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on October 28, 2010, 05:23:23 AM
That guy was such a douche. I still ride with him, though.

I've heard bad things about him... Like a tendency to butt-bump Prius, and ride on bald tires. Oh and his fashion sense in that Cortech and Tourmaster shit he's worn... bleh.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on October 28, 2010, 06:08:05 AM
I heard he secretly found a stash of Jimmy Hendrix special kitty litter and was lost in a Hunter S Thompson fantasy land looking for something he would never find...

This is mostly true. It was a tragic 2 week trip, in a cabin in the woods, that ended with him shooting his refrigerator. Well, actually, it wasn't his refrigerator.

I've heard bad things about him... Like a tendency to butt-bump Prius, and ride on bald tires. Oh and his fashion sense in that Cortech and Tourmaster shit he's worn... bleh.

He is a bit of a hammer. The thing that really annoys me about him, though, is that he'll call up and invite me on a "quick, spirited ride" and proceeds to lead me on a chill ride lasting 10 hours. And, inevitably, we end up riding dirt somewhere in West Virginia.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on October 28, 2010, 01:04:55 PM
This is mostly true. It was a tragic 2 week trip, in a cabin in the woods, that ended with him shooting his refrigerator. Well, actually, it wasn't his refrigerator.

He is a bit of a hammer. The thing that really annoys me about him, though, is that he'll call up and invite me on a "quick, spirited ride" and proceeds to lead me on a chill ride lasting 10 hours. And, inevitably, we end up riding dirt somewhere in West Virginia.

 [laugh] [laugh] [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on November 04, 2010, 09:43:18 AM
Not even the Super version..

(http://farm5.static.flickr.com/4033/5145909632_b5f93c60e5_b.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 04, 2010, 10:12:24 AM
KTM might as well make motorized unicycles... Every photo - and I mean *every* photo - the bike is on 1 wheel!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on November 04, 2010, 10:24:32 AM
Coming in 2012

(http://web.mit.edu/newsoffice/2008/gulak-2-enlarged.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 04, 2010, 10:30:04 AM
^ [laugh] It's even hooligan orange!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on November 05, 2010, 06:05:32 AM
from here I carry my commentary that isn't relevant to that thread
http://www.ducatimonsterforum.org/index.php?topic=297.msg792981#msg792981 (http://www.ducatimonsterforum.org/index.php?topic=297.msg792981#msg792981)

That's an orange framed S2R800.  I think her name is Susan, and works at the Georgetown Uni.  I've talked to her a couple of times while riding through that area.

so, is she an alien beast from Dimension 28 living in Apartment 28?  (god I hope you get the reference!)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 05, 2010, 02:46:30 PM
XRay revealed a broken rib?... (http://smileys.on-my-web.com/repository/Surprise/surprised-002.gif)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on November 05, 2010, 03:06:28 PM
XRay revealed a broken rib?... (http://smileys.on-my-web.com/repository/Surprise/surprised-002.gif)

Doood?  Seriously?  I think it's time to talk with Izaak or Chris.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on November 05, 2010, 04:39:32 PM
XRay revealed a broken rib?... (http://smileys.on-my-web.com/repository/Surprise/surprised-002.gif)
And when did you notice a bit of pain while breathing? ???

Please get yourself a good and proper checkup! [bow_down]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on November 05, 2010, 04:46:46 PM
Ahhhhh just put some Tussin on it.......


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 06, 2010, 09:07:00 AM
Never noticed the rib; never felt any pain. Odd. And there aint much to do about it. Supposed to just chill for a while and no activity. Bah!

Now for more xrays... Actually sitting in the radiology dept as I write this.

Had a thorough exam earlier in the week, so healthy besides the shoulder and busted rib. Doc seems to think the pain I feel in my shoulder could really be the rib. So more xrays to be sure.

Later on today I'm gonna take pics of the bike and gear and post up.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on November 06, 2010, 09:15:21 AM
I think it's time to talk with Izaak or Chris.

I'm going to start repeating this ^ line.  I had lunch with Chris yesterday, and mentioned your off while we were eating.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on November 07, 2010, 04:18:28 AM
F!  It's a cold one out there this morning.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on November 07, 2010, 05:10:57 AM
What are you going to do when you join the Marines??

Oh that's right, you are A.F.  Carry on.
 [evil]   ;D



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on November 07, 2010, 05:12:00 AM
Whatever buddy.  Carry on carving your wood...  (http://serve.mysmiley.net/mad/mad0244.gif) (http://www.mysmiley.net/free-facebook-smileys.php)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on November 07, 2010, 05:13:02 AM
...and I snatched up the last neck gaiter worth a shit at REI by you! [evil]

[moto]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on November 07, 2010, 05:14:53 AM
More importantly, the big green egg feels no cold!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on November 07, 2010, 06:00:22 AM
Dood B, as I said thursday, get in touch with Chris and or Izaak. I know that's not Statlers field (not sure about I) but they will have recommendations.  Though your injuries aren't so bad, so said the driver was douching up real fast and tippy toeing towards (or has) made fraudulent claims about damage to his car. Seems pretty clear he's going to be a pain in the ass and not a responsible adult


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on November 07, 2010, 01:53:36 PM
Maybe this is naive, but given the fact that both of the responding LEOs (as well as the police report) stated that the car driver was completely at fault for failing to stop and yield right of way, how could the driver make claims against Brian for damage (fraudulent or otherwise) to his car?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Geaux on November 07, 2010, 02:04:53 PM
Is his insurance paying for damages to Brian and his bike?  Maybe he figures he can get a new bumper while he's at it?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on November 07, 2010, 02:36:17 PM
From what Brian told me on Thursday (pls correct if I get it wrong B) - the driver has claimed  to his insurance that Brian stuck and damaged his car. How could the driver do this - you hit it right on the head. It's my take that the driver is trying to lay a false claim either to try to dodge some blame (based on the LEOs fat chance for that, jackass) and/or get some previously existing damage fixed up on an insurers dime.

From the accounts I've heard they driver was trying to shift blame from minute one. Do you really think he might not be the type to lay up a bit of insurance fraud?

As I said to B on Thursday - I'd sure be curious to have a peek at the drivers cell/text records. See if he was on the celly, as it's now illegal to hand hold/text while driving in MD (*sigh* too bad we have to legislate common sense)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 07, 2010, 05:45:00 PM
Maybe this is naive, but given the fact that both of the responding LEOs (as well as the police report) stated that the car driver was completely at fault for failing to stop and yield right of way, how could the driver make claims against Brian for damage (fraudulent or otherwise) to his car?

This was the first question to my insurance company. But...

Is his insurance paying for damages to Brian and his bike?  Maybe he figures he can get a new bumper while he's at it?

No, not yet. Inattentive driver is now claiming I struck his vehicle. Inattentive driver's insurance company is trying to make the case that I did not control my vehicle. I believe there's an investigation going on. Whatever. I've been with GEICO  since I was 16 years-old, and they know what I'm about...


From what Brian told me on Thursday (pls correct if I get it wrong B) - the driver has claimed  to his insurance that Brian stuck and damaged his car. How could the driver do this - you hit it right on the head. It's my take that the driver is trying to lay a false claim either to try to dodge some blame (based on the LEOs fat chance for that, jackass) and/or get some previously existing damage fixed up on an insurers dime.

From the accounts I've heard they driver was trying to shift blame from minute one. Do you really think he might not be the type to lay up a bit of insurance fraud?

This is correct, yuu. The investigating officer had the clearest interpretation of the situation based on the scene, and he made the call.

[commentary]
The only reason why, I believe, the car did not flee the scene is because (he knew) there was no way he would have gotten away without being identified. There were 2 riders ahead and 2 riders behind me. Any one of these folks could snap a pic of the license plate and driver/riders. So, instead, the driver is shifting fault.
[/commentary]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on November 07, 2010, 07:32:37 PM
Those friendly  [leo]s were up there enough to surely notice that there was no damage to that guy's car. Besides, if your bike would have hit that car there would be paint transfer...something that I thought had happened until Zooom schooled me in the Ducati primer color.

On a side note, I would still recommend getting your own attorney. 16 years with Geico or not, those insurance bastards are out to screw everyone! You need someone to protect your interests, not the insurance company's bottom line.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on November 07, 2010, 07:33:30 PM
On a more pleasant note: BOOBIES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
(http://i154.photobucket.com/albums/s255/jimwatsondc/2010-11-07_16-19-16_648.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on November 07, 2010, 07:54:04 PM
Did the police report say anything about you, or your bike, coming into contact with this scumbag's car?

Are we going to have to hire an attorney for you?



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on November 08, 2010, 05:09:23 AM
On a side note, I would still recommend getting your own attorney. 16 years with Geico or not, those insurance bastards are out to screw everyone! You need someone to protect your interests, not the insurance company's bottom line.
+1 on the attorney. Geico (as any other insurance Co.) will only do so much. If there is a counter claim from the other driver which you cannot disprove, they will pay him and your rates will increase. How do I know? I learned the hard way. [bang] [bang] [bang]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: TitanMonsterS4R on November 08, 2010, 05:43:33 AM
On a more pleasant note: BOOBIES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
(http://i154.photobucket.com/albums/s255/jimwatsondc/2010-11-07_16-19-16_648.jpg)

Is it a little cold where you're storing your bike?  You look a littler perky....


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on November 08, 2010, 06:30:57 AM
Did the police report say anything about you, or your bike, coming into contact with this scumbag's car?

Prolly not - but that doesn't mean the driver can't be a douche. It's just going to be hard for him to get his douchey way. Hopefully justice and common sense prevail. But until then - lawyer up!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 08, 2010, 06:42:05 AM
Yes, I will be speaking with a lawyer this afternoon. Thanks for nudging me along...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 08, 2010, 06:46:54 AM
Did the police report say anything about you, or your bike, coming into contact with this scumbag's car?

Nope.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on November 08, 2010, 02:28:13 PM
'Twas mighty cold this morning on the way to work!!! [thumbsdown]

But this afternoon was absolutely beautiful!! [moto] Had to take the long way home.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on November 08, 2010, 02:34:06 PM
Dammit, now that song is stuck in my head!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on November 08, 2010, 03:13:19 PM
Not usually a fan of covers, but Norah pretty much rocks it
Norah Jones-The Long Way Home (http://www.youtube.com/watch?v=tpeIePQpSuU&feature=related#normal)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on November 08, 2010, 03:22:43 PM
Man-card removal squad will be along shortly.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on November 08, 2010, 04:51:18 PM
But Lars.....she's got B :o :o BIES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 08, 2010, 05:02:56 PM
QUICK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!  [evil]

EDIT: NSFW depending on where you work...

Lords Of Acid - Scrood By You (http://www.youtube.com/watch?v=MkZdNtew69Q#normal)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on November 08, 2010, 05:11:55 PM
Let's "stay classy", ok?  ;D

Anchorman-Afternoon Delight (http://www.youtube.com/watch?v=eplbDbp6XJQ#normal)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on November 08, 2010, 05:16:29 PM
QUICK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!  [evil]

EDIT: NSFW depending on where you work...

Now that brings back some fyn ass HI school memories!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on November 09, 2010, 02:18:34 PM
 [moto] [moto] [moto] [moto] [moto] [moto] [moto]
Left work early and made a Bowie run on the 620 from Sunoco to Citgo with all the normal fun stuff thrown in. I love that little bike!
 [moto] [moto] [moto] [moto] [moto] [moto] [moto]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on November 10, 2010, 05:45:14 AM
Yes, I will be speaking with a lawyer this afternoon. Thanks for nudging me along...

How's this all going?

And weren't we promised photos?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 10, 2010, 07:12:11 AM
How's this all going?

I cannot comment.

And weren't we promised photos?

Yep. Took the photos, then got distracted.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on November 10, 2010, 07:30:27 AM
I cannot comment.

 >:( So I guess it's safe to assume the driver is being a jerk. May his nose hair grow uncontrollably and his posterior too

Yep. Took the photos, then got distracted.

Well.. now you're focused.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on November 20, 2010, 09:43:27 AM
Wash Your Balls!! Axe commercial (http://www.youtube.com/watch?v=CtZKL74LgMg&feature=player_embedded#normal)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on November 20, 2010, 01:10:52 PM
Have one of those.  The red side isn't going near any balls.

just sayin.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on November 22, 2010, 02:29:57 PM
Yeesh!  Why couldn't it have been this warm yesterday?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on November 22, 2010, 04:38:25 PM
Yeesh!  Why couldn't it have been this warm yesterday?
Puddin.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on November 23, 2010, 02:15:46 AM
Puddin.

85 and sunny darling, 85 and sunny.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 27, 2010, 12:53:28 PM
Chilly. Windy. Needed something to watch in between CL surfings...

http://churchofgo.blip.tv/ (http://churchofgo.blip.tv/)

The music get's on your nerve after a while, but good production for DIY'ers.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 30, 2010, 07:55:20 AM
Lawyer worked. ;)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on November 30, 2010, 08:26:36 AM
Lawyer worked. ;)

case closed, settled, and paid(including medical)?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on November 30, 2010, 08:31:33 AM
Lawyer worked. ;)

Score a win for the good guys. Hope they paid Meds, bike and gear... and PITA tax too.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 30, 2010, 10:00:08 AM
case closed, settled, and paid(including medical)?

Not quite, but things are moving along at a brisk pace now. And, thanks to my flawless driving record, it was hard to pin any fault on me.

Score a win for the good guys. Hope they paid Meds, bike and gear... and PITA tax too.

Def on the PITA tax... can't say too much here (yet).


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: TitanMonsterS4R on November 30, 2010, 10:33:54 AM
Not quite, but things are moving along at a brisk pace now. And, thanks to my flawless driving record, it was hard to pin any fault on me.

Def on the PITA tax... can't say too much here (yet).

Soooo what are you going to get my friend?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on November 30, 2010, 10:46:06 AM
Not quite, but things are moving along at a brisk pace now. And, thanks to my flawless driving record, it was hard to pin any fault on me.

Def on the PITA tax... can't say too much here (yet).

Sucks that you had to get a law dog involved and pay that cost. But sounds like he/she got the job done so it's worth it.

Soooo what are you going to get my friend?

Got any leanings? People want to know


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: TitanMonsterS4R on November 30, 2010, 11:11:15 AM
Sucks that you had to get a law dog involved and pay that cost. But sounds like he/she got the job done so it's worth it.

Got any leanings? People want to know

Got nothing. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on November 30, 2010, 11:30:22 AM
Not you! The guy with no bike...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on November 30, 2010, 11:40:33 AM
hey B, Would have been handy a little bit ago

http://www.motorcycle-usa.com/793/8539/Motorcycle-Article/Motorcycle-Law--Documenting-Accident-Scene.aspx?WT.i_e_dcsvid=1034576281 (http://www.motorcycle-usa.com/793/8539/Motorcycle-Article/Motorcycle-Law--Documenting-Accident-Scene.aspx?WT.i_e_dcsvid=1034576281)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 30, 2010, 11:41:48 AM
Soooo what are you going to get my friend?

I definitely want another Monster. I definitely want a sport bike. I definitely want motard. I'm looking to buy 2 of these 3 (prolly used) in 2011.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 30, 2010, 11:46:24 AM
hey B, Would have been handy a little bit ago

http://www.motorcycle-usa.com/793/8539/Motorcycle-Article/Motorcycle-Law--Documenting-Accident-Scene.aspx?WT.i_e_dcsvid=1034576281 (http://www.motorcycle-usa.com/793/8539/Motorcycle-Article/Motorcycle-Law--Documenting-Accident-Scene.aspx?WT.i_e_dcsvid=1034576281)

Quote
Although your clothes and helmet may be ruined, save them! They may contain evidence of paint transfers and can make compelling trial exhibits. Your bashed in helmet will help a jury understand the mechanism of your concussion and the reasons for your residual cognitive problems.

Bingo. BTW - I still owe you guys photos, but was asked to hold off for a while. They're coming...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on November 30, 2010, 11:57:49 AM
Once the dust is settled. No rush. Getting you proper due is way more important than some photos


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on November 30, 2010, 12:25:32 PM
hey B, Would have been handy a little bit ago

http://www.motorcycle-usa.com/793/8539/Motorcycle-Article/Motorcycle-Law--Documenting-Accident-Scene.aspx?WT.i_e_dcsvid=1034576281 (http://www.motorcycle-usa.com/793/8539/Motorcycle-Article/Motorcycle-Law--Documenting-Accident-Scene.aspx?WT.i_e_dcsvid=1034576281)

you damn derbier you...derbying my link...LOL

http://www.ducatimonsterforum.org/index.php?topic=44728.0 (http://www.ducatimonsterforum.org/index.php?topic=44728.0)

 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on November 30, 2010, 12:40:58 PM
Congrats man, I'm sure you'll send up with some fun new additions.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on November 30, 2010, 12:49:15 PM
you damn derbier you...derbying my link...LOL

Meh....


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on November 30, 2010, 06:23:41 PM
Check out GlobeRiders on WealthTV. Web site: http://www.globeriders.com/. (http://www.globeriders.com/.) TV Guide listings: http://www.tvguide.com/detail/tv-show.aspx?id=18506066. (http://www.tvguide.com/detail/tv-show.aspx?id=18506066.)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on December 02, 2010, 05:19:05 AM
You only dream of driving like this   ;D



http://www.wired.com/autopia/2010/12/you-only-dream-of-driving-like-this/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+wired%2Findex+%28Wired%3A+Index+3+%28Top+Stories+2%29%29&utm_content=Google+Feedfetcher (http://www.wired.com/autopia/2010/12/you-only-dream-of-driving-like-this/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+wired%2Findex+%28Wired%3A+Index+3+%28Top+Stories+2%29%29&utm_content=Google+Feedfetcher)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on December 02, 2010, 06:05:36 AM
There's a new addition to the family up in Balmer.

(http://img.photobucket.com/albums/v432/theartfuldubber/Puppy/Day1-2.jpg)

(http://img.photobucket.com/albums/v432/theartfuldubber/Puppy/Day1.jpg)

Meet Honey the Rott puppy. She was my Christmas present to myself and my girlfriend. Now... to rig up a sidecar...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on December 02, 2010, 06:23:36 AM
^^^ she is just adorable. [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on December 02, 2010, 06:35:28 AM
You need to get the plans for the puggle-pod and scale them up!



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on December 02, 2010, 07:57:50 AM
Awww, cute! :)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on December 02, 2010, 10:41:05 AM
Oh geeze - the cuteness factor of this thread just went up exponentially!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: TitanMonsterS4R on December 02, 2010, 01:03:36 PM
http://www.wired.com/autopia/2010/12/you-only-dream-of-driving-like-this/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+wired%2Findex+%28Wired%3A+Index+3+%28Top+Stories+2%29%29&utm_content=Google+Feedfetcher (http://www.wired.com/autopia/2010/12/you-only-dream-of-driving-like-this/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+wired%2Findex+%28Wired%3A+Index+3+%28Top+Stories+2%29%29&utm_content=Google+Feedfetcher)

Is there any point during this video where dudes tires aren't smokin?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on December 02, 2010, 01:05:24 PM
Is there any point during this video where dudes tires aren't smokin?

I thought that was a little bizarre - obviously, if the tires weren't smokin, it ended up on the editing room floor


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on December 02, 2010, 01:11:59 PM
I couldn't see the video here at work...but knowing Rhys Millen....he is a grade1 awesomeness driver with the capabilities for D1 as well as many other styles...the man was more than likely doing it completely intentionally and in 100% complete control....

so yeah...he was probably roasting the rubber the whole damn time, because THAT is what he does!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on December 02, 2010, 01:46:45 PM
There's a new addition to the family up in Balmer.

(http://img.photobucket.com/albums/v432/theartfuldubber/Puppy/Day1-2.jpg)

(http://img.photobucket.com/albums/v432/theartfuldubber/Puppy/Day1.jpg)

Meet Honey the Rott puppy. She was my Christmas present to myself and my girlfriend. Now... to rig up a sidecar...

SWEET PUP!!! 

She looks a lot like Darmah when I first got her.

  [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on December 02, 2010, 06:52:37 PM
There is something about puppies, and most children too, that makes them so adorable. I think it's a survival mechanism to help balance out the amount of shit they produce that ends up always in the worst place.

Look at that nice carpet over there... I'll go pee on it.  ;D

Oooh antique furniture, perfect for sharpening my nails!  [cheeky]

On a somewhat related note, I just got a pair of 2TB drives to back up stuff to. Ever since I've moved to digital audio/video/photo it's become so ridiculously easy to lose stuff.  [bang] [bang] [bang] [bang] [bang]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on December 11, 2010, 11:13:26 PM
Just remembered why Brian should not get a Speed Triple.

Wheeling en SuperDuke (http://www.youtube.com/watch?v=5whS2r1yHDQ&feature=related#normal)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on December 12, 2010, 02:59:32 AM
Perfect example of SuperDuking!!! [clap]

SD's are plentiful on cycletrader although I  haven't looked into shipping.

I am personally looking for a StuporDuke R .





Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on December 12, 2010, 06:23:17 AM
I think I saw a ham sandwich hanging out of the backpack.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on December 12, 2010, 09:55:25 AM
The ham sandwich more than likely had a smidgen of spicy Guldens!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on December 12, 2010, 10:51:18 AM
Wife told me I can't have anything with the word "speed" in it anyway. Hehe...
 [evil]

Stuck in MN as the snow fell in foot deep sheets yesterday and last night. Hope to catch up with you guys this week if something comes together.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on December 15, 2010, 06:45:06 AM
LOOK....it is Pepe's non-Powered emPorium!!!

http://www.motorcycle-superstore.com/1328/MNGR/Hi-Viz-Motorcycle-Riding-Gear.aspx?SiteID=em_12_15_Gen_Hi-Viz_Gear&WT.mc_ID=35997&WT.i_e_dcsvid=1034576281 (http://www.motorcycle-superstore.com/1328/MNGR/Hi-Viz-Motorcycle-Riding-Gear.aspx?SiteID=em_12_15_Gen_Hi-Viz_Gear&WT.mc_ID=35997&WT.i_e_dcsvid=1034576281)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on December 15, 2010, 08:21:34 PM
LOOK....it is Pepe's non-Powered emPorium!!!

http://www.motorcycle-superstore.com/1328/MNGR/Hi-Viz-Motorcycle-Riding-Gear.aspx?SiteID=em_12_15_Gen_Hi-Viz_Gear&WT.mc_ID=35997&WT.i_e_dcsvid=1034576281 (http://www.motorcycle-superstore.com/1328/MNGR/Hi-Viz-Motorcycle-Riding-Gear.aspx?SiteID=em_12_15_Gen_Hi-Viz_Gear&WT.mc_ID=35997&WT.i_e_dcsvid=1034576281)

Oooooohhhh look at the pretty shiny things!  ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on December 19, 2010, 05:30:15 PM
Ducati Corse Special Project with Nicky Hayden (http://www.youtube.com/watch?v=2M2CWT__S8c#normal)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on December 19, 2010, 08:38:50 PM
Amadeus everyone!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on December 20, 2010, 05:48:38 AM
Amadeus everyone!
[laugh] lol, I can imagine the mechanics have a big WTF? moment as he said that! [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on December 20, 2010, 06:19:18 AM
Perhaps someone had been listening to a little too much Falco?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on December 22, 2010, 10:21:51 AM
Anybody need a used 14T countershaft sprocket off an older style Monster (695)? Has 6k on it but it isn't terribly worn.

I put it up in parts for sale for $20 shipped but if anyone wants to come to Balmer to get it I'll take $10 or a six pack of good beer.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on December 22, 2010, 12:44:56 PM
Sitting on the balcony watching a streetfighter hooligan his way up A1A. God, I love life! [wine]

(http://i154.photobucket.com/albums/s255/jimwatsondc/Ducati/condoview.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on December 22, 2010, 05:29:17 PM
Sitting on the balcony watching a streetfighter hooligan his way up A1A. God, I love life! [wine]

(http://i154.photobucket.com/albums/s255/jimwatsondc/Ducati/condoview.jpg)

I want my boat and a bottle of Patron to be in that Pic right now.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on December 22, 2010, 05:37:54 PM
I want my boat and a bottle of Patron to be in that Pic right now.

Don't forget the bevy of drunken Swedish bikini girls for all your single friends.   [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on December 27, 2010, 09:56:22 AM
Good god it's make the beast with two backsing windy out there. 

That is all...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on December 27, 2010, 10:41:01 AM
Good god it's make the beast with two backsing windy out there. 

That is all...

feeling like this is gonna be a stiff and warm cocktail kind of evening to cut through the cold and warm the cockles


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on December 27, 2010, 11:59:41 AM
feeling like this is gonna be a stiff and warm cocktail kind of evening to cut through the cold and warm the cockles

Yea, I need to be hitting the gym later this evening,  but the thought of chilling out with a glass of bourbon is much more to my liking...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on December 27, 2010, 12:10:56 PM
A good night to drive back to DC from northern Conn!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on December 28, 2010, 11:44:52 AM
So...  Might be in the low 50s on Saturday.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on December 28, 2010, 11:46:48 AM
And I might have my ECU back from Houston Superbikes... hmmm.

Anyone have a used rear sprocket they plan on throwing away? I'll take it off your hands for a six pack if you're just going to toss it. I'm starting a clock making project and need spare gears.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on December 28, 2010, 12:55:13 PM
Anyone have a used rear sprocket they plan on throwing away? I'll take it off your hands for a six pack if you're just going to toss it. I'm starting a clock making project and need spare gears.

I used to have a few when I was thinking about using counter shaft sprockets for wheels and cutting a few rear sprockets in bits for to make a Battlebot out of an RC car....then I moved out of that house and lost my projects stuff along with my project space....

as a completely unrelated note to that....the MAD group has a few people meeting on Saturday for the 1st day of the new year Viking ride...some will be on Duc's while others may be on other machines....they will be meeting at the Starbucks in Germantown at MiddleBrook Rd and 118 next to EuromotorCars Mercedes and Smart at 10am


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: TitanMonsterS4R on December 28, 2010, 12:57:17 PM
And I might have my ECU back from Houston Superbikes... hmmm.

Anyone have a used rear sprocket they plan on throwing away? I'll take it off your hands for a six pack if you're just going to toss it. I'm starting a clock making project and need spare gears.

You and me both.  The S2R800's should be on it's way back this week so I can  [moto] with my new Acewell.  Time to burn the midnight oil installing. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on December 28, 2010, 01:07:58 PM
You and me both.  The S2R800's should be on it's way back this week so I can  [moto] with my new Acewell.  Time to burn the midnight oil installing. 

Reealllllly. How are you doing your TPS reset? Have your wiring diagram ready? IF you're feeling frisky we could have an install party in my garage. I know a few locals interested in swapping gauges.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on December 30, 2010, 08:38:40 AM
Gun show this weekend, in Fredricksburg.  Just saying...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on December 30, 2010, 06:11:39 PM
Ouch

Wheelie Fail (http://www.youtube.com/watch?v=xV8b53zDulM&NR=1#normal)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on December 30, 2010, 06:55:03 PM
Natural Selection.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on December 30, 2010, 08:20:53 PM
And I might have my ECU back from Houston Superbikes... hmmm.

Anyone have a used rear sprocket they plan on throwing away? I'll take it off your hands for a six pack if you're just going to toss it. I'm starting a clock making project and need spare gears.

Might have a sprocket for you, will check parts drawer tomorrow.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on December 31, 2010, 06:36:42 AM
Natural Selection.
+1 need more of it [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on December 31, 2010, 07:05:43 AM
Might have a sprocket for you, will check parts drawer tomorrow.

Much appreciated, keep me posted.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on January 10, 2011, 01:47:43 PM
I headed into the washroom at work this afternoon... standing at the urinal... I hear some poor soul snoring in the stall behind me. I can only assume some dude fell asleep taking a crap.



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on January 10, 2011, 01:51:44 PM
Almost been that guy. That' F-ing hilarious.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: TitanMonsterS4R on January 10, 2011, 05:01:10 PM
I headed into the washroom at work this afternoon... standing at the urinal... I hear some poor soul snoring in the stall behind me. I can only assume some dude fell asleep taking a crap.

you should have yelle FIRE......That would ahve been f'in awesome!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on January 11, 2011, 07:00:10 AM
He was probably napping in the only place he knew know one would bother him. :)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on January 11, 2011, 07:48:00 AM
Almost been that guy.

You now owe us a story at the next meet-up...

you should have yelle FIRE......

Believe me, I immediately thought of pranking this guy! I even went so far as to enlist some fellow co-workers. But we all felt too sorry for the bastard.

He was probably napping in the only place he knew know one would bother him. :)

It's sad, but I think you're right.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on January 11, 2011, 10:39:12 AM
I remember seeing something years ago where they showed the lay-z-boy section of a dept. store in Tokyo. There were a couple of people reclined back and sleeping. The clerk said that they had a few regulars who would come in during lunch or whatever and nap there a couple of times a week. Thanks to Japanese politeness the sales clerks just left them alone.  [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on January 12, 2011, 04:41:59 AM
I remember seeing something years ago where they showed the lay-z-boy section of a dept. store in Tokyo. There were a couple of people reclined back and sleeping. The clerk said that they had a few regulars who would come in during lunch or whatever and nap there a couple of times a week. Thanks to Japanese politeness the sales clerks just left them alone.  [thumbsup]

I remember seeing a story about a few nap centers in NYC for the same thing...they offered 30, 60, and 90 min options in their recliner chambers...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on January 15, 2011, 05:13:24 AM
As if some of you geeks hadn't heard, iPhone's coming to Verizon next month.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on January 15, 2011, 07:43:24 AM
What's an iPhone? My first one still works fine:
(http://www.slipperybrick.com/wp-content/uploads/2007/02/80-brick-phone.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on January 26, 2011, 07:43:07 PM
Power, out. 

What?
 [bang]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on January 27, 2011, 03:34:10 AM
I was going to ask... 

This is just a reminder from the thunderstorms of last summer: god hates MoCo!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on January 27, 2011, 04:34:42 AM
I was going to ask... 

This is just a reminder from the thunderstorms of last summer: god hates MoCo!
naah he just likes to remind us that we should have stopped hanging power lines from trees a loooong time ago [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on January 27, 2011, 05:14:10 AM
not power loss at my place...


gotta love them underground lines!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on January 27, 2011, 08:40:45 AM
Holy shit!!! 

http://www.bbc.co.uk/news/world-europe-12283833 (http://www.bbc.co.uk/news/world-europe-12283833)

Taken from the dog thread in NMC


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on January 27, 2011, 02:01:57 PM
Holy shit!!! 

http://www.bbc.co.uk/news/world-europe-12283833 (http://www.bbc.co.uk/news/world-europe-12283833)

Taken from the dog thread in NMC

Wow, what a story!

I imagine being at sea all the time your eyes would start to ignore details of the frozen stuff floating around. That dog is lucky someone was attentive/alert/curious/etc...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on January 30, 2011, 02:23:16 PM
F**K Verizon! F**K THEM HARD! 5 days and still no net!  >:( >:( >:(


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on January 31, 2011, 04:28:59 AM
F**K Verizon! F**K THEM HARD! 5 days and still no net!  >:( >:( >:(

duuuuuuuuuuuude....

all I can say is, I have never had an outage due to weather or other outside circumstances with Comcast for that long...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on January 31, 2011, 07:49:14 AM
duuuuuuuuuuuude....

all I can say is, I have never had an outage due to weather or other outside circumstances with Comcast for that long...
It's got nothing to do with weather or anything other than their complete incompetence and lack of regard for their customers. [thumbsdown]

No one in my building has lost service (phone, electric, water or anyting) due to the weather. What really pisses me off is that everytime we call customer service and speak to a tech they keep telling us that they'll have it fixed within 24hrs and as of today, it's still no net at home. I hate it when people lie to my face! >:(


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on January 31, 2011, 08:42:14 AM
my mom had a problem in her building with Fios at 1st and apparently the guy who was servicing Comcast customers was messing with the Fios connections to people in the building...maybe it is at the box where it comes in under similar circumstances?...I have also heard stories in the reverse of things as well...they all play those games if they can for to get service tickets for switching...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on January 31, 2011, 10:06:13 AM
What really pisses me off is that everytime we call customer service and speak to a tech they keep telling us that they'll have it fixed within 24hrs and as of today, it's still no net at home. I hate it when people lie to my face! >:(

They must be taking lessons from Pepco


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on February 03, 2011, 08:49:51 AM
Well, there goes the season...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on February 03, 2011, 11:00:34 AM
Well, there goes the season...

when do you deploy and for how long and do you need the bikes babysat whilst you are gone?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on February 03, 2011, 11:20:16 AM
I can donate garage space to the cause. Just a warning though, if you leave the SC up here I WILL ride it. I might tell you I won't at some point, but I assure you, I will.

Seriously though, got some space under roof if you need it for a while.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on February 03, 2011, 12:29:16 PM
Well, there goes the season...
WTF?!?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on February 03, 2011, 12:47:36 PM
Don't have a date yet, as the ops shop shuffled everything around to cover their asses, but it looks like I'll be rolling out in about a month.  Roger and Chris both offered to garage the bikes for me, so I think that's covered.  Friend of mine from work is going to keep Darmah while I'm gone, so that's taken care of as well.  Thanks for the offers though guys, I really appreciate it.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on February 04, 2011, 01:47:32 AM
Aaaarrrrrgggghhhhh! That sucks! Who's gonna whip Lars into a frenzy on the Church of the Hooligan rides? Who's gonna stupefy Lars by flashing the Super Duke at him? And........and.........and, what about the children?!?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on February 04, 2011, 03:38:51 AM
..... and what about the ham sammiches?!? ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on February 04, 2011, 06:02:54 AM
Balls. How long are they taking you for?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on February 04, 2011, 06:30:42 AM
Aaaarrrrrgggghhhhh! That sucks! Who's gonna whip Lars into a frenzy on the Church of the Hooligan rides? Who's gonna stupefy Lars by flashing the Super Duke at him? And........and.........and, what about the children?!?

and more importantly...if the bikes sit at Roger's, they'll never get ridden and have "au paire" ass all over them that you can dream of but not touch....


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on February 04, 2011, 10:09:04 AM
and more importantly...if the bikes sit at Roger's, they'll never get ridden and have "au paire" ass all over them that you can dream of but not touch....
That's probably part of the deal, when Ben gets back he'll have the lovely shape pressed into the seat! [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on February 04, 2011, 10:20:55 AM
That's probably part of the deal, when Ben gets back he'll have the lovely shape pressed into the seat! [laugh]

nahhh...just stains from ass-juice squeezins...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on February 04, 2011, 10:57:53 AM
I know it's a "say anything" thread, but, really?  :-X


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on February 04, 2011, 11:19:27 AM
I know it's a "say anything" thread, but, really?  :-X

just use some mental floss....that and a shot of a nice Anejo and you'll be okay!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on February 04, 2011, 03:55:26 PM
nahhh...just stains from ass-juice squeezins...


Just.wow.speechless


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on February 04, 2011, 04:56:42 PM
 
and more importantly...if the bikes sit at Roger's, they'll never get ridden and have "au paire" ass all over them that you can dream of but not touch....
That's probably part of the deal, when Ben gets back he'll have the lovely shape pressed into the seat! [laugh]

Ass squeezins??

You dmf'ers ain't right...........









and I dig it!   [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on February 11, 2011, 02:16:05 PM
Guess it's time to buy one of those batteries for the SD.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on February 12, 2011, 05:12:59 AM
Guess it's time to buy one of those batteries for the SD.
I ordered a Shorai from batterystuff.com, been too lazy to install but I love the weight difference! [thumbsup]

On a completly different note, my brother sent me this yesterday, top ten worst (or best?) pranks:

The 10 Worst Boyfriends of All Time (http://www.youtube.com/watch?v=opS_DMV30jQ#normal)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on February 12, 2011, 06:50:19 AM
The milk jug was the best!! 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on February 12, 2011, 01:26:42 PM
The milk jug was the best!!  

The one where he fakes being an intruder - that's, uh, funny? He scared the #@& outta her, and not in a ha-ha way.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on February 13, 2011, 10:03:21 AM
At Rockys in Thurmont........no bikes today.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on February 14, 2011, 01:51:32 PM
So it looks like I get my deployment turned off just in time to find out that the gal I've been seeing is probably going to get pegged for one.  WTF??!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on February 14, 2011, 01:54:54 PM
So it looks like I get my deployment turned off just in time to find out that the gal I've been seeing is probably going to get pegged for one.  WTF??!!

I didn't know you were into that...


http://en.wikipedia.org/wiki/Pegging_(sexual_practice) (http://en.wikipedia.org/wiki/Pegging_(sexual_practice))


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on February 14, 2011, 01:55:59 PM
 [roll]

Please note that I said SHE is getting pegged.

 [cheeky]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on February 14, 2011, 03:34:34 PM
[roll]

Please note that I said SHE is getting pegged.

 [cheeky]


well...I've heard of it both ways from Emily...figured there might be more than one girl out there goin about it differently!?!?!?!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on February 14, 2011, 04:21:02 PM
There is no way I would believe that the EM would know about the wiki-filth.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on February 14, 2011, 08:24:27 PM
And I figured Roger would be the first to jump in.   :D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on February 15, 2011, 02:29:11 PM
And I figured Roger would be the first to jump in.   :D

Funny you should mention that.....when I first read your post all I saw was the gal you are seeing got pregged......

I had to delete my previous brilliantly worded post.......


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on February 17, 2011, 01:49:53 PM
A certain backfire was noted in various locations throughout Anne Arundal County.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on February 18, 2011, 02:23:39 PM
Got to get a PCIII or TuneECU.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on February 18, 2011, 02:48:02 PM
Lars, you know you want it:

http://www.ducatimonsterforum.org/index.php?topic=46512.0 (http://www.ducatimonsterforum.org/index.php?topic=46512.0)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on February 18, 2011, 04:27:26 PM
DAYUMN RIGHT!!!!!!!!!!!!

however 40k is way outta my reach.

Another year and there may be something that i can afford.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on February 21, 2011, 07:28:10 AM
Hell YES free leathers.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on February 21, 2011, 08:51:12 AM
Hell YES free leathers.

hahhahahhaa.  free.   hahahahahhaa


like third-date free.

hahahhahahahaha.

(it's so gonna cost you)

<still laughing>


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on February 21, 2011, 08:56:42 AM
If you're looking to get shame out of me that well got tapped dry years ago my friend :D

I used to have a high-level contact at the Science Center but we stopped banging and she got a new job so I'll have to see if anyone remembers me over there.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on February 21, 2011, 09:28:29 AM
I'm looking to forward to just how much foolishness Ted gets himself into.   [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on February 21, 2011, 09:30:19 AM
Now to go find some Power Ranger episodes on the Pirate Bay for some source material.

I have my B.S. in Foolishness and a BFA in Visual Art and Design. This should be pretty epic.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on February 21, 2011, 10:05:16 AM
I'm looking to forward to just how much foolishness Ted gets himself into.   [thumbsup]

imagine if that inner harbor cop that yelled at the kid for skateboarding was there at the time for to make a cameo appearance....LOL


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 06, 2011, 01:46:28 PM
DAMN!!  This guy's got some skilz...

http://www.youtube.com/watch?v=yQSq6IHr2Gk&feature=player_embedded#at=223 (http://www.youtube.com/watch?v=yQSq6IHr2Gk&feature=player_embedded#at=223)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on March 06, 2011, 02:00:29 PM
I would go so far as mad skilz had he ham-sandwiched.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: TitanMonsterS4R on March 06, 2011, 02:11:38 PM
he just proved to me that anything can be raced!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on March 06, 2011, 02:15:23 PM
I would go so far as mad skilz had he ham-sandwiched.

hahhahahahaa....

though...I'd dare him to try those endo's with those cases loaded down!...I;d bet there'd have been more than just 1 high side then...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on March 06, 2011, 02:16:52 PM
he just proved to me that anything can be raced!

so I guess you've never seen Christian Pfieffer doin his thing on a BMW F800 then have you?

Christian Pfeiffer insane stunt show BMW 2010 (http://www.youtube.com/watch?v=8UM5XdLUN04&feature=fvst#normal)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: TitanMonsterS4R on March 06, 2011, 03:03:01 PM
WTF.....Unreal what some folks can do on a bike.  Only wish I had known he was going to be in Garmisch on 2010 I would have waited and not gone in 2009.  That place rocks!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on March 11, 2011, 10:09:19 AM
http://www.pipeburn.com/home/2011/3/11/video-liberty-vintage-motorcycles.html (http://www.pipeburn.com/home/2011/3/11/video-liberty-vintage-motorcycles.html)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 11, 2011, 12:58:52 PM
Wrapped this for a buddy of mine. Coolest helmet wrap I've ever done.

(http://img.photobucket.com/albums/v432/theartfuldubber/IMG_20110307_170313.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on March 11, 2011, 01:10:09 PM
http://www.pipeburn.com/home/2011/3/11/video-liberty-vintage-motorcycles.html (http://www.pipeburn.com/home/2011/3/11/video-liberty-vintage-motorcycles.html)
Cool video! [thumbsup]

Guess I'm getting old, but I agree with the guy about a few things. I think he over-generalizes a bit, my kids might not know a phillips from a flat head but they'll understand tomorrow's new tech better than I will. :-\


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 11, 2011, 01:12:25 PM
My children (either male or female) will know the difference and be able to tell by feel the difference between Phillips #1,#2, and #3. They will know the difference between a claw hammer and a framing hammer. They will know why you use a jigsaw in some circumstances and a coping saw in others.

It pisses me off how worthless most people are when it comes to practical knowledge.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: TitanMonsterS4R on March 11, 2011, 02:12:29 PM
Wrapped this for a buddy of mine. Coolest helmet wrap I've ever done.
(http://img.photobucket.com/albums/v432/theartfuldubber/IMG_20110307_170313.jpg)

Very nice. How might I ask did you do that?  Did he give you the cut and you wrapped it or did you use your design skillz to create it and then wrapped it.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 11, 2011, 03:38:05 PM
Time to go clean all the crap off the chain...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 11, 2011, 05:06:22 PM
Very nice. How might I ask did you do that?  Did he give you the cut and you wrapped it or did you use your design skillz to create it and then wrapped it.

I hit up my 3M rep for a sample of DiNoc, then I used my wrap skillz to apply the material. Not an easy task by any means.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 12, 2011, 08:40:52 AM
Where'd the make the beast with two backsing sun go?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on March 12, 2011, 08:59:19 AM
My children (either male or female) will know the difference and be able to tell by feel the difference between Phillips #1,#2, and #3. They will know the difference between a claw hammer and a framing hammer. They will know why you use a jigsaw in some circumstances and a coping saw in others.

It pisses me off how worthless most people are when it comes to practical knowledge.

Um, my framing hammer has a claw on it......just sayin.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on March 12, 2011, 01:19:06 PM
Where'd the make the beast with two backsing sun go?
It is scheduled for tomorrow.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 12, 2011, 01:27:27 PM
It is scheduled for tomorrow.

Oh well, duty calls...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on March 14, 2011, 10:55:57 AM
Oh well, duty calls...

duty or doodie?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on March 14, 2011, 12:19:18 PM
Wrapped this for a buddy of mine. Coolest helmet wrap I've ever done.

That's Billy's lid - yeah?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 14, 2011, 12:27:19 PM
Who else do you know that cares about Oregon State ;)

Yeah, he dropped it off at my office a while ago, just got the material in last week and wrapped it.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 15, 2011, 03:04:22 PM
Looks like HeMan, and one other, will be coming through DC around the 15th of April.  That's on a friday, so anyone up for grabbing some drinks?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on March 15, 2011, 03:57:18 PM
Looks like HeMan, and one other, will be coming through DC around the 15th of April.  That's on a friday, so anyone up for grabbing some drinks?

(http://www.x-entertainment.com/pics/kool1.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on March 15, 2011, 04:39:43 PM
Looks like HeMan, and one other, will be coming through DC around the 15th of April.  That's on a friday, so anyone up for grabbing some drinks?

Where are you thinking?  Old Town Alexandria?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 15, 2011, 05:07:28 PM
Where are you thinking?  Old Town Alexandria?

Depends on what area he's staying in?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 17, 2011, 03:53:08 PM
So He Man is going to be staying up in Rockville when he comes through.  Brian, know of a good spot to meet up for drinks?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on March 18, 2011, 05:47:16 AM
So He Man is going to be staying up in Rockville when he comes through.  Brian, know of a good spot to meet up for drinks?

SEVERAL...depends on where in Rockville he is going to be...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on March 18, 2011, 06:16:44 AM
Matchbox Pizza has some smoking hot waitresses and outdoor seating......Hooters is right across the street.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on March 18, 2011, 06:24:06 AM
Matchbox Pizza has some smoking hot waitresses and outdoor seating......Hooters is right across the street.
Well that pretty much settles it!  ;D [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 18, 2011, 06:50:06 AM
Matchbox Pizza has some smoking hot waitresses and outdoor seating......Hooters is right across the street.

The wife must be so proud. 

 ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on March 18, 2011, 07:06:58 AM
The wife must be so proud. 

 ;D
Remind me to drop off her resume' at both places.  [laugh] [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on March 18, 2011, 07:09:21 AM
The wife must be so proud. 

 ;D

Should I call you Skillet or Kettle?

 [roll] ;D



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on March 18, 2011, 07:36:50 AM
Should I call you Skillet or Kettle?
That proves you've never seen us together, I'm obviously the Kettle! [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 18, 2011, 08:02:27 AM
What time are you fools getting together? If it's Happy Hour vicinity I might head down. Busy later.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on March 18, 2011, 10:54:26 AM
The wife must be so proud. 

 [laugh]

I'll vote for Matchbox. If I want to see too much makeup with orange compression hose and pushup bras, well I've got teh innerwebs for that.

OK, maybe I'm grumpy 'cause I had to work today.

Still, pizza over wings!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on March 18, 2011, 11:44:23 AM
[laugh]

 Still, pizza over wings!

+1 on that basis alone...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on March 18, 2011, 12:11:18 PM
make the beast with two backsing beautiful!!!!  [moto] [moto] [moto]

Ben, green panties on a gixxer and I hit the first half of the Bowie Hooligan run today and, well, it was great!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 18, 2011, 01:14:53 PM
What time are we eating pizza tonight?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 18, 2011, 01:33:35 PM
Pizza?  Tonight?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on March 18, 2011, 01:34:26 PM
I thought it was April 15.....


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 18, 2011, 01:35:15 PM
Me too.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 18, 2011, 01:40:02 PM
Reading is hard.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on March 18, 2011, 01:45:50 PM
Reading is hard.
Reading Fail! ;D

(http://painstaking.net/wp-content/plugins/wp-o-matic/cache/e5238_fail-owned-blond-study-fail.jpg)

Book? What book?!?  [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 18, 2011, 01:50:59 PM
That shirt would not be particularly flattering on me.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 18, 2011, 05:44:21 PM
MotoGP is upon us again.  Watching the practice sessions is really feeding my desire to own a SBK again...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on March 18, 2011, 07:58:08 PM
Slow Motion video from the Isle of Man TT 2010

Isle Of Man TT 2010 Slow Motion HD - A Tribute (http://www.youtube.com/watch?v=77iHHYXy9NE#normal)

Better version (http://www.liveleak.com/e/51c_1280826305) with Belfast by Orbital as music [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 19, 2011, 05:49:49 AM
This should be done sometime soon...

http://maps.google.com/maps?q=U.S.+Route+33,+Harrisonburg,+Va.,+to+Seneca+Rocks,+W.Va&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&sa=N&hl=en&tab=wl (http://maps.google.com/maps?q=U.S.+Route+33,+Harrisonburg,+Va.,+to+Seneca+Rocks,+W.Va&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&sa=N&hl=en&tab=wl)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on March 19, 2011, 06:21:57 AM
This should be done sometime soon...

http://maps.google.com/maps?q=U.S.+Route+33,+Harrisonburg,+Va.,+to+Seneca+Rocks,+W.Va&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&sa=N&hl=en&tab=wl (http://maps.google.com/maps?q=U.S.+Route+33,+Harrisonburg,+Va.,+to+Seneca+Rocks,+W.Va&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&sa=N&hl=en&tab=wl)

I'm down for that!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 25, 2011, 07:46:11 AM
I'm considering putting clip-ons on the Monster, who is local and would be willing to let me take their clip-on equipped bike for a spin?

I have never dropped mine, let me drop yours!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on March 25, 2011, 08:38:39 AM
I'm considering putting clip-ons on the Monster, who is local and would be willing to let me take their clip-on equipped bike for a spin?

I have never dropped mine, let me drop yours!
I'm not exactly in your neck of the woods, but if I don't sell/part the 900 by then, you're welcome to give it a try. It has a pair of Cycle Cat clips with about 2 inches in rise, the bars are about the hight of the registers on the adjustable forks (just fyi).

If someone with below-the-triple clips is available you can feel the difference and see which you prefer.

Maybe we can set this up for the next meet, April 15th, with He-Man in Rockville?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on March 25, 2011, 09:44:27 AM
I'm considering putting clip-ons on the Monster, who is local and would be willing to let me take their clip-on equipped bike for a spin?

I have never dropped mine, let me drop yours!

G's 620 has low clipons and high pegs... elbows touching knees.

My RS has high pegs and clipons below tripple but with 3 inch rise.

swing on by.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 25, 2011, 09:50:06 AM
I'll take both of you up on it, I'm looking at all the options. Elbows vs. knees sounds absolutely miserable on the street, but who knows, I do have some gorilla arms.

I'll see you Pepe on the 15th assuming the bike is still around, and Chris, what's your weekend look like?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on March 25, 2011, 09:52:55 AM
cold and snowy.

you live somewhere else?

 [laugh]

(Sat morning I'm booked and Sunday morning is snow)


(you can only borrow G's bike in the snow  [laugh])


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 25, 2011, 10:01:43 AM
I own a very nice pair of long underwear and a tiny enough brain that I still go out in cold weather :D

Maybe one night next week works better then, I get home around 6:30 most nights. Just keep me posted. We need to get together to discuss/plan a certain video anyway.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on March 25, 2011, 10:15:35 AM
Sure.  We'll schedule it in. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on March 25, 2011, 11:30:46 AM
We need to get together to discuss/plan a certain video anyway.


hear back from Charm City Cakes at all?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 25, 2011, 11:33:43 AM
Not a word  :-\


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on March 25, 2011, 01:19:44 PM
Have a good fried who is a fantastic singer/songwriter.  Plays acoustic and has awesome voice.

Hasn't played out in a long time.  Did our 40th bday party at a bar though and rocks the living room here  ;D


So he needed a nudge to get back out in public (divorce pending and soon-to-be ex was big reason for the lack of playing out.

So I bought him a fishman 220.  That thing is so kick ass.  Perfect for what he does.

I'll announce when he's got something local as we should have a group go.

and he rides... rode to Sturgis from here.  commutes on an FZ1.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 25, 2011, 01:22:09 PM
Always up for live music.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 25, 2011, 01:24:22 PM
i'll vouch, he's good at what he does.   [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on March 28, 2011, 06:00:26 AM
I thought it was April 15.....

well...looks like I am going to be out on the 15th as I will be at the Hyatt Capitol Hill at 5:15pm for a Mandatory Crew Meeting for the Face OF America ride

as a side note-one of my buddies is riding in the name of several wounded vets and could use any and all support donations -> http://www.worldteamsports.kintera.org/faf/donorReg/donorPledge.asp?ievent=451174&lis=1&kntae451174=D59938FBAEE0426DB719F5DB28B655C8&supId=322592536 (http://www.worldteamsports.kintera.org/faf/donorReg/donorPledge.asp?ievent=451174&lis=1&kntae451174=D59938FBAEE0426DB719F5DB28B655C8&supId=322592536)

sorry for the SPAM for those that might be offended...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 28, 2011, 07:59:09 AM
as a side note-one of my buddies is riding in the name of several wounded vets and could use any and all support donations -> http://www.worldteamsports.kintera.org/faf/donorReg/donorPledge.asp?ievent=451174&lis=1&kntae451174=D59938FBAEE0426DB719F5DB28B655C8&supId=322592536 (http://www.worldteamsports.kintera.org/faf/donorReg/donorPledge.asp?ievent=451174&lis=1&kntae451174=D59938FBAEE0426DB719F5DB28B655C8&supId=322592536)

sorry for the SPAM for those that might be offended...

More info please.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on March 28, 2011, 01:41:34 PM
Man, bikes are selling quick! Missed out on a couple of deals over the weekend, but something will come up.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 28, 2011, 01:52:30 PM
bobsbmw has a basically brand new 999R.   [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on March 28, 2011, 03:21:55 PM
bobsbmw has a basically brand new 999R.   [evil]

Hush, now! I can't be going broke. I won't be able to afford riding when gas hits $6/gallon.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 28, 2011, 03:23:47 PM
You're a chemist, come up with a non-vegetable based solution.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on March 29, 2011, 05:09:35 AM
well...looks like I am going to be out on the 15th as I will be at the Hyatt Capitol Hill at 5:15pm for a Mandatory Crew Meeting for the Face OF America ride

as a side note-one of my buddies is riding in the name of several wounded vets and could use any and all support donations -> http://www.worldteamsports.kintera.org/faf/donorReg/donorPledge.asp?ievent=451174&lis=1&kntae451174=D59938FBAEE0426DB719F5DB28B655C8&supId=322592536 (http://www.worldteamsports.kintera.org/faf/donorReg/donorPledge.asp?ievent=451174&lis=1&kntae451174=D59938FBAEE0426DB719F5DB28B655C8&supId=322592536)

sorry for the SPAM for those that might be offended...

More info please.

Robert Keiser , or as we(from many other MotoCrew support team events) know him, "Tape" from when he crews with us on the various Breast Cancer events that we work together. He rides in this event. His dad , IIRC, is a Vietnam vet.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on March 29, 2011, 12:42:59 PM
Let's make it everybody get a new bike month! What the hell are you waiting on?!? [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on March 29, 2011, 12:44:12 PM
  What the hell are you waiting on?!? [evil]

you to give me the money!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 29, 2011, 12:52:09 PM
you to give me the money!!!

[laugh] [laugh] [laugh] [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on March 29, 2011, 01:04:33 PM
you to give me the money!!!

I just spent all my monies! Well, not quite but....but...but...must get mods. This bike is bone stock!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 29, 2011, 01:19:43 PM
Just ride it stock for a while and get the feel of it.  Those bikes are set up pretty nice as they come, so no need to rush out and drop money on anything.  Well, except for a suspension set up, but with the '09 all you're really looking at is getting it set up versus tearing into it. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 29, 2011, 01:25:26 PM
Just ride it stock for a while... ...so no need to rush out and drop money on anything...

You shut your whore mouth  [laugh]

We all know the formula for motorcycle success is:

1. Love the way the bike runs and handles
2. Buy shiny parts
3. Rip off everything that works great
4. Replace with parts designed to make a race bike tenths of a second faster
5. Hate the way the bike runs and handles
6. Sell it.
7. ...Profit?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on March 29, 2011, 01:48:07 PM
You shut your whore mouth  [laugh]

We all know the formula for motorcycle success is:

1. Love the way the bike runs and handles
2. Buy shiny parts
3. Rip off everything that works great
4. Replace with parts designed to make a race bike tenths of a second faster
5. Hate the way the bike runs and handles
6. Sell it.
7. ...Profit?

 [laugh] [laugh] [laugh]
With a whore mouth like that you'd think he'd have a whole flock of Ducs after only a single Saturday night!

Some things have to go though...that license plate hemorrhoid on the back MUST GO!

Some things are a must: frame sliders...well, we know how I ride! 'Nuf said.

Some things are a maybe:
Maybe some lighting baubles....oooohh, shiny!
Maybe some mirrors....oooohh, shiny!
Depending on how the exhaust sounds in person...maybe I can stand it for a while. Leo Vince is pretty cheap for this! I'll be scouring the triumph forums as well.

And some things are a no go:
No need for the fancy plug in ready quick shifter that was "free" from Pete's cycle, I'm still gonna be slow.

And I'll still come in cheaper than Pete's if I get everything on here.

And then there's the power commander and on and on, but that'll be later.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: 696DCRider on March 29, 2011, 01:53:54 PM
Nice buy  [thumbsup].


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 29, 2011, 02:20:27 PM
Oh believe me, I've already been down the road of mods for the Daytona.  As far as the exhaust goes, the Leo Vince full system is the best sounding in my opinion, but they claim it won't readily fit the post '08 bikes.  Zard makes a really nice full system as well, and while it is a little raspier than the LV, it's no where near as deep.  And for the record, there's no need to go PCIII/V for that bike.  TuneECU is already set up to map the stock ecu on the bike, and I've got all the needed bits.  We just need to find you a good map to go with it...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on March 29, 2011, 02:30:56 PM
Oh believe me, I've already been down the road of mods for the Daytona.  As far as the exhaust goes, the Leo Vince full system is the best sounding in my opinion, but they claim it won't readily fit the post '08 bikes.  Zard makes a really nice full system as well, and while it is a little raspier than the LV, it's no where near as deep.  And for the record, there's no need to go PCIII/V for that bike.  TuneECU is already set up to map the stock ecu on the bike, and I've got all the needed bits.  We just need to find you a good map to go with it...

I agree about the LV system sounding best (at least on the youtube videos I've been drooling over)...the Akrapovic is quite nice as well. I have to find out more about this TuneECU thing. Here's a whole thread of map-a-liciousness! http://www.triumph675.net/forum/showthread.php?t=44225 (http://www.triumph675.net/forum/showthread.php?t=44225) I'll have plenty of time to play this summer, so will probably beg, borrow or steal your tuning goodies. ;D

How's the SD?

Edit: Hells bells, Man! That shit is free! Where do I get a cable?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 29, 2011, 02:39:45 PM
The Akra is just a slip on.  I'd either get the Arrow or the TOR if I was just getting a slip/on.  For a full system though, I'd probably do a Zard for an '09.

Seriously though, focus on the suspension first.  You'd be surprised at how well that thing will scoot with properly set up bouncy bits.

Edit: Hells bells, Man! That shit is free! Where do I get a cable?

I've got one.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on March 29, 2011, 02:57:28 PM
Seriously though, focus on the suspension first.  You'd be surprised at how well that thing will scoot with properly set up bouncy bits.

Yes, father. Just please don't ground me and send me to my room! [laugh] [laugh]

You around next Saturday 4/9? I'll let you ride it out to Steve's for my Lard Ass Suspension Clinic, where I'll let you help set up the suspension. MRP's suspension guy is out for 6-8 weeks and there's now way I'm gonna go that long without riding a new toy!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 29, 2011, 03:04:46 PM
lol  You'll let me help set the suspension?  How kind of you. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on March 29, 2011, 03:10:06 PM
lol  You'll let me help set the suspension?  How kind of you. 

I thought you might like that richness! ;D ;D



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 30, 2011, 03:04:40 PM
Looks like another bike got stolen from the complex yesterday/last night... 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on March 30, 2011, 03:11:04 PM
Looks like another bike got stolen from the complex yesterday/last night... 

Want a nasty (bluff) letter from a nasty ('nother bluff) lawyer?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on March 30, 2011, 03:12:58 PM
For any northerners up in balmore...   Peter is playing open mic night at hightopps tonight.   Won't know what time until later.  Sometime between 9 and 10:30.   I'm going up at 9:30 (earliest I could get babysitter).

He'll do it again next week.   

And expect full sets out soon. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on March 30, 2011, 03:50:12 PM
Looks like another bike got stolen from the complex yesterday/last night... 

Shit-balls. Gonna tape a CS grenade to the handlebars?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on March 30, 2011, 04:11:15 PM
Looks like another bike got stolen from the complex yesterday/last night... 

Hopefully your house buying comes through soon so you can get the hell out of there! That is some shit!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 30, 2011, 04:13:09 PM
Looks like another bike got stolen from the complex yesterday/last night... 

Strike that, just spoke with the cop outside and found out that two bikes were taken today, both R1s.

Want a nasty (bluff) letter from a nasty ('nother bluff) lawyer?

Yes please.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on March 30, 2011, 07:40:23 PM
Strike that, just spoke with the cop outside and found out that two bikes were taken today, both R1s.

Faaaahk! You know it's the same guy / team - pigs return to the trough. I sure hope the cops are watching the place. You should also hassle the management about security cameras - and a reduction in rent as you live in such a bad neighborhood! :)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on March 31, 2011, 03:22:27 AM
Ben, in addition to the full coverage on your bikes, did you get USAA to write you a Renters Insurance Policy for to piggyback your stuff?

that is indeed fooked up...I'd be looking to place discreetly a couple of wireless lipstick camera's and let them feed recording to a laptop in your place....knowing that the landlord won't do it, you cach a glimpse of them, you can help the police and safeguard your stuff...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on March 31, 2011, 03:37:08 AM
I'd be sleeping with my friend Benelli in the garage under a pile of rags.

"Dear landlord. I caught the perpetrators that were stealing motorcycles. Bring a mop and a metric shit ton of Ziploc bags. Handcuffs won't be necessary."


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on March 31, 2011, 03:57:04 AM
be more fun to have a set of heavy spring loaded toothy jaw Bear traps and hook em up and have the chain for it bolted to the floor so you guarantee snaring them from getting away!...let the cops mop it up...because if they stole 3 bikes...chances are, they are a part of a ring of thieves for which you can save/find others machinery and be the good guy and collect the reward!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on March 31, 2011, 02:22:19 PM
Ben, in addition to the full coverage on your bikes, did you get USAA to write you a Renters Insurance Policy for to piggyback your stuff?

The bikes aren't insured through USAA, but are covered.  They are also doubly covered with the renters, which is with USAA.

that is indeed fooked up...I'd be looking to place discreetly a couple of wireless lipstick camera's and let them feed recording to a laptop in your place....knowing that the landlord won't do it, you cach a glimpse of them, you can help the police and safeguard your stuff...

I'm looking into this.  One thing I'm curious about though, what would the legal system have to say about mounting my own personal cameras for that purpose?  Especially considering the garage is a communally used structure.  Would I need to get written approval of all people who reside in the building, stating that they consent to being filmed for security purposes?  Chris?  Izaak?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on April 01, 2011, 09:48:50 AM
I'm looking into this.  One thing I'm curious about though, what would the legal system have to say about mounting my own personal cameras for that purpose?  Especially considering the garage is a communally used structure.  Would I need to get written approval of all people who reside in the building, stating that they consent to being filmed for security purposes?  Chris?  Izaak?

public or communal domain/property/area to me means there is no expectation of or for privacy...so it seems to me that it'd be legal....just speculating based on general logic...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 01, 2011, 12:29:38 PM
Maybe so, but this communal property also happens to be an extension to these people's domicile. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 04, 2011, 10:03:23 AM
Too... nice out... can't work...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on April 04, 2011, 10:17:53 AM
Maybe so, but this communal property also happens to be an extension to these people's domicile. 

I would think you would have to get some kind of sign-off legal thing from them in order for someone other than the landlord to do this.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: 696DCRider on April 04, 2011, 10:23:23 AM
Why is it that when the weather is crappy, you take your bike apart to do a project, and as soon as it's in pieces and not usable you get a day like today?  argghh!
Too... nice out... can't work...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 04, 2011, 10:27:13 AM
I'm thinking that the Gods were pleased by Ben's sacrifice of the squirrel yesterday and they are thanking us with this great weather. Next time I'll make sure he kills things on a Friday so we can at least benefit.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on April 04, 2011, 11:09:20 AM
So what's this video that was mentioned? Hmmm?

Oh and Artful, the Terrible was good stuff. Not at all what I expected based on it's color.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 04, 2011, 11:49:34 AM
Uploading the clip to Vimeo now, so 15 minutes + the hour or so that Vimeo usually takes to process. I'm curious how much they're going to chop in terms of quality and how visible the incident will be. In stunning 60fps HD though it's quite detailed.

Glad you like the Terrible. It's one of my go-tos when I'm looking for something to sip on.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on April 04, 2011, 11:59:54 AM
Does Vimeo allow snuff films?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 04, 2011, 12:03:14 PM
They sure didn't pull down my video where I killed that hooker and hid her body pretended to kill that hooker and hide her body.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 04, 2011, 12:49:42 PM
Alright, it's not nearly as clear as the source video, but meh, it'll do.

Squirrelicide (http://www.vimeo.com/21939828)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 04, 2011, 01:05:21 PM
 [laugh] [laugh]

I can hear you cackling away.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 04, 2011, 01:12:37 PM
I left that in there just for you  ;D

You can't completely hear it in the video but my laughter was nearing hysterics. Like tears streaming down my face uncontrollable laughter. I couldn't help but imagine Buddy Hackett in "It's a Mad, Mad, Mad, Mad World" saying "Did you see the way it just went sailing right out there?".


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on April 04, 2011, 01:21:20 PM
The weird gets weirder - a reference to Buddy Hackett was just made!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 04, 2011, 04:34:26 PM
So Jim, how was your class on Sunday?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on April 04, 2011, 05:30:02 PM
So Jim, how was your class on Sunday?

It was AWESOME!!! I'd read the book a couple of times and tried some of the exercises in there, but doing it in the class with the instructors watching you and then giving you feedback really helped. The exercises start out simple but build up in complexity quickly. Hanging off the bike while cooking it around a 40 foot circle is a blast! Back that up to another circle for some figure-8 action and you've got a jizz in your pants fun time.

The students in the class were an interesting mix of folks from all over...virginia to NJ. About 25% chicks, about 1/3 cruisers, 1/3 bmw adventure bikes (with assorted douchebags on top [roll]), and 1/3 sport/sport tourers. I was surprised to not have the least amount of experience there.

The only thing I was disappointed in was the suspension section...part of it turned into an ad for racetech. Nothing bad, just a "racetech valves and springs will make you a world class rider." We did spend some time on looking at the effects of an improperly set up suspension...that would be mine on both bikes. The springs and shit are here for the monster so I'm interested to see what a different beast it's going to be like when that's all installed. After spending some time in the class, riding and talking to the instructors, I decided some of my hesitancy in corners (besides fear itself) is from an unsettled suspension. Keeping the bike at a lesser lean angle was helpful in settling the suspension and allowing me to carry more speed into the turn.

All in all, a great experience on a beautiful day (except for that chilly ass ride to Columbia at 7am). I'm planning to take level 2 in either June (probably) or Sept.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on April 04, 2011, 05:38:21 PM
I forgot to say thanks to you and Lars, who have been very good role models when I can manage to watch your form on Sundays. It's made me a better rider and allowed me not to make a total ass of myself this weekend...well at least while riding in the class. ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 04, 2011, 06:04:32 PM
 [thumbsup]  It's all good.  Looking forward to seeing you put the newly found skills/techniques to work.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on April 04, 2011, 06:11:43 PM
I forgot to say thanks to you and Lars, who have been very good role models when I can manage to watch your form on Sundays. It's made me a better rider and allowed me not to make a total ass of myself this weekend...well at least while riding in the class. ;D
So that's how you "pay" Ben for his leftover parts, eh!?! :P [cheeky]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 04, 2011, 06:14:16 PM
So that's how you "pay" Ben for his leftover parts, eh!?! :P [cheeky]

No, he brings nice scenery (on a gixxer) to the rides.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 04, 2011, 07:37:34 PM
I knew I came along on the wrong Sunday. All I saw as far as scenery goes was Ben's ass and Lars in leather pants the whole day. At least I'm thankful there were no green thongs involved.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 04, 2011, 07:39:28 PM
At least I'm thankful there were no green thongs involved.

That you know of.  Lars is a bit freaky like that...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on April 05, 2011, 12:41:46 AM
So that's how you "pay" Ben for his leftover parts, eh!?! :P [cheeky] Got any parts I need? I'll say nice things about you too. ;D
What can I say?!? I'm a cheap parts whore. ;D

I knew I came along on the wrong Sunday. All I saw as far as scenery goes was Ben's ass and Lars in leather pants the whole day. At least I'm thankful there were no green thongs involved.
There's nothing wrong with green thongs....on the right ass.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on April 05, 2011, 06:11:11 PM
Ben, I been meaning to ask how the SD is running with the new map. I'm exploring exhaust options for the daytona and have to be somewhat resourceful since LV doesn't make a full system for the '09. I don't think the earlier system will fit either...something about a change in the shape of the header pipes or something (ignorance revealed is beautiful isn't it? [laugh])


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 05, 2011, 06:14:37 PM
I only dove for cover a few times.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 05, 2011, 06:22:11 PM
The gun-fire has definitely subsided, that's for sure.  It's still there to a degree, but I've recently noticed a slight exhaust leak coming from where the header connects to the slip-on's mid pipe.  Hoping that will go away with a new graphite gasket, which these bikes are known to go through.

As far as how it's actually running?  All I can say is [thumbsup].  The map I installed took care of at least 90% of the on/off throttle snatchiness and also cured the hunting/surging that the bike used to do under 4500 rpms.  One more thing I want to do is take up the bit of remaining of the slack in the throttle cable, and then sync that to the activation of the throttle bodies.  I need to delve a little further into all the features that TuneECU lets you adjust, because the possibilities seem almost endless.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on April 05, 2011, 06:28:02 PM
I need to delve a little further into all the features that TuneECU lets you adjust, because the possibilities seem almost endless.

 [drool] [drool] [popcorn] [bacon]

Anybody know a good exhaust shop/welder?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 05, 2011, 06:38:08 PM
If I had an '09+ Daytona, I'd either go with the Zard or this one.

GPR su Daytona 675 (http://www.youtube.com/watch?v=8ag7V7cxW2k#normal)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on April 05, 2011, 06:48:41 PM
If I had an '09+ Daytona, I'd either go with the Zard or this one.

GPR su Daytona 675 (http://www.youtube.com/watch?v=8ag7V7cxW2k#normal)

Love the sound. Hate the look of the GPR. Plus I'm so slow, someone would surely call me a poseur with an exhaust like that. Of course, this would be nothing new for me. ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 07, 2011, 06:09:19 AM
Oh Ben... http://www.ducatimonsterforum.org/index.php?topic=47868.0;topicseen (http://www.ducatimonsterforum.org/index.php?topic=47868.0;topicseen)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 07, 2011, 09:17:07 AM
WON'T LOOK!!  CAN'T LOOK!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on April 07, 2011, 09:19:23 AM
WON'T LOOK!!  CAN'T LOOK!!

Liar! You should look!  [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 07, 2011, 02:20:02 PM
Oh.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on April 07, 2011, 02:32:47 PM
Oh.

I was thinking you might get a little bit excited thinking about Lars' reaction to a Turbo SD.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 07, 2011, 02:37:14 PM
Here you go Jim.

http://www.feelthetrack.com/tuning_guide.htm (http://www.feelthetrack.com/tuning_guide.htm)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on April 07, 2011, 02:40:13 PM
Here you go Jim.

http://www.feelthetrack.com/tuning_guide.htm (http://www.feelthetrack.com/tuning_guide.htm)

Awesome! I've seen several different places, but nothing that looks as comprehensive as this. Guess I know what I'm doing tonight!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 07, 2011, 02:53:24 PM
Dave Moss knows a thing or two...

Here's some more data to go by. 

http://www.ohlins.com/Checkpoint-Ohlins/Setting-Up-Your-Bike/Underrubrik_1/ (http://www.ohlins.com/Checkpoint-Ohlins/Setting-Up-Your-Bike/Underrubrik_1/)

Most importantly though, we'll want to take thorough notes of everything we do...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on April 11, 2011, 04:14:08 PM
I hate it when it's pretty outside and I'm stuck at work!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 11, 2011, 04:21:06 PM
After spending some time in the class, riding and talking to the instructors, I decided some of my hesitancy in corners (besides fear itself) is from an unsettled suspension. Keeping the bike at a lesser lean angle was helpful in settling the suspension and allowing me to carry more speed into the turn.

So, notice any difference in the way you/it feel/s after I tweaked the damping on the Daytona?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 11, 2011, 04:23:15 PM
I hate when it's beautiful out and I have a corded rear tire.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 11, 2011, 04:24:21 PM
You could always buy a new one.  Just saying...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: 696DCRider on April 11, 2011, 04:25:03 PM
I hate when it's pretty outside and I cannot ride because I lost my gear transmission rod  :-[
I hate it when it's pretty outside and I'm stuck at work!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 11, 2011, 04:26:07 PM
You could always buy a new one. 

Boy, this is easy...

 :D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: 696DCRider on April 11, 2011, 04:27:25 PM
Lol.  I looked everywhere in my damn house this weekend to find it.  I think it's possible it got left at the powdercoater.  Gonna take a week for the new one to arrive  :(

You could always buy a new one. 

Boy, this is easy...

 :D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on April 11, 2011, 05:07:18 PM
So, notice any difference in the way you/it feel/s after I tweaked the damping on the Daytona?

Yeah, it's much more stable going in and when braking before the corner. I didn't necessarily notice it before, but now that it's gone...I can tell that there was a little "hiccup" in the suspension as I was setting up/cornering. Has definitely decreased the pucker factor. I still need some work on picking lines and good corner entry speed. I'm also still not great at judging how much ass to get off the seat for a given curve. I should be able to get lots of seat time this summer and will hopefully be riding better and better.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 11, 2011, 06:30:05 PM
You could always buy a new one.  Just saying...

It's ordered Julie, don't worry. Btw make the beast with two backs Dunlop, that thing lasted 4k tops.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 12, 2011, 01:36:36 AM
Btw make the beast with two backs Dunlop, that thing lasted 4k tops.

Doood, what do you expect?  I'm surprised it lasted that long with the way you're winding that thing up and sliding around corners the way you are.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 12, 2011, 05:02:34 AM
It's hard to wrangle in the raw power of the 695. I don't know if I'll ever find a tire that can handle the sheer torque.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on April 12, 2011, 05:32:58 AM
I've got a pair of Michelin Pilot Sport tires if you want. Just help me take 'em off the rims and you can have them!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 12, 2011, 05:38:39 AM
Dammit, already ordered the Angel ST rear and my front only has 2k or so on it.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on April 15, 2011, 03:03:51 AM
I ran into traffic last night, around 11:30 PM, in the most unlikely spot. No obvious obstructions... just plain ol traffic. I'm starting to notice this pretty regularly. So...

Does it seem the population here in DC has grown substantially compared to this time last year? I recall being able to move about more freely on most of my ant trails... wondering if anyone else is experiencing this.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on April 18, 2011, 09:06:41 AM
Nice bike review from the guys at MCN

www.youtube.com/watch?v=xyIhqt7B3Zs (http://)

watch the test riders in the background for fun bits [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 18, 2011, 12:01:14 PM
Good price on tires if anyone is looking.

http://stores.sportbiketrackgear.com/Detail.bok?no=7780 (http://stores.sportbiketrackgear.com/Detail.bok?no=7780)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on April 18, 2011, 12:54:56 PM
Good price on tires if anyone is looking.

http://stores.sportbiketrackgear.com/Detail.bok?no=7780 (http://stores.sportbiketrackgear.com/Detail.bok?no=7780)

Prices are a bit cheaper ($10-$15) at competition accessories http://www.compacc.com/p/Dunlop-Sportmax-Q2-Motorcycle-Tires-Z-Rated-Package-Specials (http://www.compacc.com/p/Dunlop-Sportmax-Q2-Motorcycle-Tires-Z-Rated-Package-Specials) I've been loooking around  ;D

Btw, bit of a tech question: what size tire on a 6-inch rear hub? I've seen 180/55 listed as fitting, but I'm wondering how much more "squashed" would the tire be, and if it's just better to go with a 190/50?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on April 20, 2011, 04:27:44 PM
Sorry to interrupt...









but...









POLLEN!!!









Okay, carry on.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on April 21, 2011, 03:20:20 AM
here's a link for Statler...

http://www.kilometermagazine.com/artman2/publish/cultural/Audi_Sponsors_Stephen_Cobert_s_Boat_in_2011_Charleston_Bermuda_Race.html (http://www.kilometermagazine.com/artman2/publish/cultural/Audi_Sponsors_Stephen_Cobert_s_Boat_in_2011_Charleston_Bermuda_Race.html)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on April 21, 2011, 04:21:27 AM
Sorry to interrupt...
but...
POLLEN!!!

Okay, carry on.

My dark blue VW is now slightly green from the amount of yellow on it - preach it brother!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on April 21, 2011, 06:49:24 AM
POLLEN!!!

You said it! I woke up last night and my throat felt like sandpaper. I think yesterday was the high pollen count for the year. So far...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on April 25, 2011, 06:53:57 AM
that short storm that rocked Baltimore yesterday afternoon picked up my heavy Weber grill and flipped it upside down, depositing it about ten feet away.

Didn't knock over the track bike sitting on a stand under a cover a few feet away though.   Strange.

Grill was covered and up against the house.    Looks like wind hit house and went straight up hard enough to lift the grill.   House roof looks ok.

Going to check boat today (on trailer at marina waiting to be detailed)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 25, 2011, 06:55:41 AM
Holy hell... nothing that dramatic in Parkville. Other than soaking me from tits to testicles that is...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 25, 2011, 07:07:44 AM
Holy hell... nothing that dramatic in Parkville. Other than soaking me from tits to testicles that is...

Nice mental image. Thanks for that.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on April 25, 2011, 07:22:42 AM
Nice mental image. Thanks for that.

 [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on April 25, 2011, 07:47:14 AM
Holy hell... nothing that dramatic in Parkville. Other than soaking me from tits to testicles that is...

Reminder to self: never eat and read here at the same time. I threw up in my mouth a little.  [puke]


[laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on April 25, 2011, 12:34:13 PM
that short storm that rocked Baltimore yesterday afternoon picked up my heavy Weber grill and flipped it upside down, depositing it about ten feet away.

Didn't knock over the track bike sitting on a stand under a cover a few feet away though.   Strange.

Grill was covered and up against the house.    Looks like wind hit house and went straight up hard enough to lift the grill.   House roof looks ok.

Going to check boat today (on trailer at marina waiting to be detailed)

I flew into BWI in the middle of that storm......that SUCKED!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: 696DCRider on April 26, 2011, 08:42:15 AM
Why isn't there a BAD (Baltimore) section on the forum?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 26, 2011, 08:52:25 AM
Why isn't there a BAD (Baltimore) section on the forum?

Because there are like 5 of us that are active. Makes more sense to lump us into CAM. Besides, we're way cooler and more exclusive, I wouldn't want to sully up our reputation.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: 696DCRider on April 26, 2011, 09:00:43 AM
Oh okay, gotcha, lol.

Because there are like 5 of us that are active. Makes more sense to lump us into CAM. Besides, we're way cooler and more exclusive, I wouldn't want to sully up our reputation.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 26, 2011, 09:26:11 AM
Besides, we're way cooler and more exclusive, I wouldn't want to sully up our reputation.

Delusional too.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 26, 2011, 09:27:32 AM
Very.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on April 26, 2011, 10:39:49 AM
just hauled the booze from the truck to the basement for the 7th.

enough tequila for 20 gallons of margaritas.

oh... and a few beers.

so...um...bring friends.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 26, 2011, 10:57:24 AM
Christ my liver is going to just fall out and run off into the woods...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on April 26, 2011, 11:11:02 AM
Christ my liver is going to just fall out and run off into the woods...

what woods?!?!...just pop it off and put it in the crab trap off the dock for some crabs later!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on April 26, 2011, 04:47:05 PM
If I had an '09+ Daytona, I'd either go with the Zard or this one.

GPR su Daytona 675 (http://www.youtube.com/watch?v=8ag7V7cxW2k#normal)

Ya know: sometimes I really hate DRKWNG! He plants this seed and then I start thinking (always a dangerous proposition)! Next thing ya know...I'm jonesing for an exhaust that only fits the previous generation Daytona. [bang]

DRKWING = [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on April 27, 2011, 02:35:53 AM
Ya know: sometimes I really hate DRKWNG! He plants this seed and then I start thinking (always a dangerous proposition)! Next thing ya know...I'm jonesing for an exhaust that only fits the previous generation Daytona. [bang]

DRKWING = [evil]

Good news! Just heard from GPR that they do have the triple exhaust available for the new Daytonas. I guess only my wallet can hate DRKWNG now! [laugh]



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 27, 2011, 04:06:53 AM
Thought you didn't like that exhaust.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on April 27, 2011, 04:35:16 AM
La donna e' mobile, qual piuma al vento. Muta d'accento e di pensiero. [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on April 27, 2011, 04:37:30 AM
La donna e' mobile, qual piuma al vento. Muta d'accento e di pensiero. [laugh]

Italian to English translation
The woman and 'mobile, a feather in the wind. Dumb accent and thought.

HUH?!?!?!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on April 27, 2011, 05:01:12 AM
Sounds like my early latin translations.  :-[

here, learn yourself a bit http://en.wikipedia.org/wiki/La_donna_%C3%A8_mobile (http://en.wikipedia.org/wiki/La_donna_%C3%A8_mobile)   [cheeky]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on April 27, 2011, 06:28:06 AM
Whoa! This joint is gettin' lousy with culture!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on April 28, 2011, 07:09:35 PM
looks like several other great musicians are dropping by the cinco de mayo party.  This might get interesting.  www.angeliquehenle.com (http://)




Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 28, 2011, 07:13:45 PM
Ok, so when are you going to book the PA?  Need anyone to run front of house for you?   ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on April 28, 2011, 07:18:27 PM
Good news! Just heard from GPR that they do have the triple exhaust available for the new Daytonas. I guess only my wallet can hate DRKWNG now! [laugh]



scarico Michi GPR... (http://www.youtube.com/watch?v=zCyE0LZbk0k&feature=related#normal)

And with baffles:

GPR triple for triple (http://www.youtube.com/watch?v=nF007-b_APc&feature=related#normal)

 [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on April 28, 2011, 08:06:12 PM
Ok, so when are you going to book the PA?  Need anyone to run front of house for you?   ;D

No joke, if you need an AV tech my tenant is in the business and has a fair amount of equipment. He's a weird dude but he knows his shit.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on April 29, 2011, 03:04:11 AM
Statler...if needed, Dolci has a portable Fender speaker system as well...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on April 29, 2011, 04:39:34 AM
Any hotels nearby? 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on April 29, 2011, 04:52:37 AM
Any hotels nearby? 

I know there is a Dunkin Donuts!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on April 29, 2011, 06:55:19 AM
There are a few sketchy hotels within 15 minutes.  I'll look to see what else is around.


Peter plays through a Fishman solo 220 which sounds fantastic and was designed for exactly what he does.   At least one of the other people coming is a pro and is bringing her own stuff, so no need for extra sound.   Thanks for the offers though.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on April 30, 2011, 08:10:16 AM
I located the Daytona's "tool kit":

(http://i154.photobucket.com/albums/s255/jimwatsondc/Ducati/2011-04-30_11-16-41_261.jpg)

I didn't know a more useless tool kit than that of the monster existed, but let me tell you about this FAIL: it's one of those slip out the bit double ended screw drivers mounted under the pillion seat...which requires an allen wrench to remove!!  [clap] Truly, I [bow_down] to the brilliance of the guy who came up with this idea.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on May 01, 2011, 09:49:08 AM
Sounds as good as the Hypers tool kit... which requires tools to get at as well


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 01, 2011, 03:25:58 PM
Watching FP3 at the moment.  Just saw the footage where lightening came down on the track while they were on it.   :o


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on May 02, 2011, 02:15:39 PM
Off to lecture....damn it was tempting to cancel it!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on May 03, 2011, 04:13:39 PM
Peter has a 45 minute set being broadcast live from a local bar at 9:00 tonight on www.yougotlaced.com (http://)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on May 06, 2011, 08:39:25 AM
we should try this! http://www.bbc.co.uk/news/uk-11046612 (http://www.bbc.co.uk/news/uk-11046612)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on May 06, 2011, 08:43:50 AM
What could go wrong?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on May 07, 2011, 12:30:43 PM
Oh, Be-en...

http://www.triumph675.net/forum/showthread.php?t=52841 (http://www.triumph675.net/forum/showthread.php?t=52841)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 07, 2011, 12:34:22 PM
Oh, Be-en...

http://www.triumph675.net/forum/showthread.php?t=52841 (http://www.triumph675.net/forum/showthread.php?t=52841)

a-hem...

Nouvelle MV Agusta F4RR Corsacorta 2011 : Premières images sur MotoStationTV ! (http://www.youtube.com/watch?v=HC-nkPjG6S8#normal)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on May 07, 2011, 12:54:30 PM
Do it. You won't.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 08, 2011, 02:37:37 AM
Do it. You won't.

You're not the boss of me.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on May 08, 2011, 04:24:38 AM
You're not the boss of me.

That would be Darma! [laugh] [cheeky]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on May 08, 2011, 04:26:06 AM
That would be DarmaH! [laugh] [cheeky]

Fixed that for ya!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on May 10, 2011, 02:28:54 PM
Anyone have the super cheesy spring compressors that Harbor Freight sells? I need to pull the spring off my ST3 setup and my nice ones don't fit between the coils. Apparently every Harbor Freight in the area is backordered.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 10, 2011, 02:52:42 PM
(http://i192.photobucket.com/albums/z53/b_upton/Moto/attachment.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on May 10, 2011, 04:17:19 PM
(http://i192.photobucket.com/albums/z53/b_upton/Moto/attachment.jpg)

Sproing!!!!!

Oh, sweet jeebus! Elizabeth, I'm comin' to see ya!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 10, 2011, 04:21:52 PM
Sproing!!!!!

Oh, sweet jeebus! Elizabeth, I'm comin' to see ya!

I know, right?  I think that will be my present to myself if I get the job that I think I will, once I leave the AF.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 11, 2011, 03:39:08 PM
Just got an email from MotoWheels.  Shorai batteries are now in stock.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on May 12, 2011, 07:54:19 AM
I've started wondering if there's enough material here for an official CAM "let's tease Ben" thread...  ;D


In the meanwhile:
(http://www.motorcycle-usa.com/PhotoGallerys/MV-Babe.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 12, 2011, 01:29:51 PM
In the meanwhile:
(http://www.motorcycle-usa.com/PhotoGallerys/MV-Babe.jpg)

Meh. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on May 12, 2011, 01:52:30 PM
Meh. 

Pretend she just dropped it..  [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 15, 2011, 05:22:06 AM
Sun's coming out.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on May 15, 2011, 03:34:41 PM
Meh. 

Wrong color?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on May 19, 2011, 01:08:37 PM
Been reading since basically forever how the economy in Germany is doing great, and I know well correlation does not imply causation, but one can't help but wonder....  [evil]

1. German economy grew by 3.6% in 2010 http://www.bbc.co.uk/news/business-12170223 (http://www.bbc.co.uk/news/business-12170223)
2. Eurozone's economic growth accelerates (in part thanks to Germany) http://www.bbc.co.uk/news/business-13386113 (http://www.bbc.co.uk/news/business-13386113)

and

3. German insurer Munich Re held orgy for salesmen http://www.bbc.co.uk/news/world-europe-13454160 (http://www.bbc.co.uk/news/world-europe-13454160)
 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on May 20, 2011, 06:40:41 AM
Zdob&amp;Zdub - So Lucky - Moldova Eurovision 2011 (Semifinal 2) (http://www.youtube.com/watch?v=OF21pTGtKTw#normal)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on May 20, 2011, 06:48:32 AM
Ya look good on that one-wheeler, Steve! [thumbsup] [laugh] [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on May 20, 2011, 07:19:22 AM
kids like to play with trumpets, but here's the real thing [evil]

Goran Bregovic Kalashnikov (http://www.youtube.com/watch?v=KtX-V4OE50Y#normal)

I think it's ridiculous how much I enjoy blasting this song when I drive! [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on May 21, 2011, 01:49:28 PM
Rapture in ~10 mins. Wine buzzed chillin' on the patio. Where in the hell (ha!) is Dick Clark when you need him? [wine]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 21, 2011, 01:56:19 PM
Just put in an offer on another place.  I felt comfortable doing so as I know I'm not going anywhere tonight...   [evil]


Title: Capitol Dragway Test & Tune 22 May @ 1:30
Post by: accludetuner on May 22, 2011, 07:55:05 AM
I have some buddies running their cars at Capitol today. I'm gonna go with the Duc (not running it) and my buddy John is bringing his Yamaha. I thought I'd pass on the invite if any of you are bored and have nothing going on for a few hours this afternoon.

If you come, BYOB or bring cash for the food/drinks cause they don't take credit.

http://www.capitolraceway.com/ (http://www.capitolraceway.com/)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on May 23, 2011, 05:13:33 AM
OK, that's it! No more posts from you until we see you in person!

(http://lounge.moviecodec.com/images/attachment/somebody-perma-ban-lego-man-now-7700.jpg)

Pppppppplllllllllbbbbbbttttttthhhhhhhhh


nyah nyah nyah....I am posting and you can't stop me!!!


as far as me and my appearance at CMD...I wasn't there due to an electrical issue that popped up with my Gran Canyon on my way out from Breakfast and I had to limp the bike home and attend to that and then later deal with my neighbor who felt the need to unneccesarily come over in a confrontational way to complain about the noise that a bone stock 01 Monster 750 carby bike makes when you fire it up for the 1st time in a season for to blow out the stabilizing chemicals and try and make issue....


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 24, 2011, 02:58:28 PM
Found out one of the guys on my new team at work rides an RSV1000.   [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on May 25, 2011, 03:09:31 AM
Found out one of the guys on my new team at work rides an RSV1000.   [thumbsup]

which Gen of that Ape?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 25, 2011, 03:28:55 AM
which Gen of that Ape?

'06.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on May 25, 2011, 10:37:27 AM
Found out one of the guys on my new team at work rides an RSV1000.   [thumbsup]
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 25, 2011, 02:43:30 PM
Found out another guy on the same team has an '06 999.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on May 26, 2011, 12:14:03 AM
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
Found out another guy on the same team has an '06 999.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 26, 2011, 05:14:36 PM
I'm going to try and get these two guys from the new office to join us on one of the upcoming rides.  I especially want to see Don's RSV.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on May 26, 2011, 05:29:21 PM
I especially want to see ride Don's RSV.

Fixed that for ya.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 27, 2011, 02:06:58 AM
I think Lars would be looking to con a ride a bit more than me. I like those Apes, but not the same way I like the '4s.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on May 27, 2011, 03:18:17 AM
I think Lars would be looking to con a ride a bit more than me. I like those Apes, but not the same way I like the '4s.

so you do a merry-go-round of bike swapping...Lars rides the Ham Sammich machine...you ride the Ape, and Don rides whatever is left that Lars rode in on...LOL


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 28, 2011, 03:30:07 PM
I hate pondering ethical decisions...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Lars D on May 28, 2011, 03:41:19 PM
As long as there are no "ass juice squeezins" everything is ethical


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 28, 2011, 03:46:19 PM
^ Not quite the mental image I was hoping for so soon after dinner...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 30, 2011, 12:36:39 PM
F'ing hot out there today boys...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on May 30, 2011, 01:50:15 PM
It's so hot that Honey is spread eagle on the hardwood floor asleep on her toy. Great ride but I'm glad I don't have anything productive to do for the rest of the day.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on May 30, 2011, 02:20:39 PM
I'm glad I don't have anything productive to do for the rest of the day.

This crazy boy speaks the truth!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: accludetuner on May 31, 2011, 03:43:16 AM
Still balls deep in fixing up John's bike. It's coming along nicely but we're only about 30% done.  It probably would have been much cheaper and easier to just buy all new panels, but he wanted to learn how to fiberglass and bondo so he's getting what he asked for.

Speaking of the hot day yesterday, my scalp is sunburned to the point that my hair hurts  [bang]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Dragsterhund on May 31, 2011, 10:34:11 AM
Speaking of the hot day yesterday, my scalp is sunburned to the point that my hair hurts  [bang]

I hate that... you dont realize until you jump in the shower... then... YEOOWWW!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on May 31, 2011, 11:33:32 AM
I hate that... you dont realize until you jump in the shower... then... YEOOWWW!!

Shave (or lose) your hair and you'll realize it much sooner! :'(

(http://farm4.static.flickr.com/3289/2474649443_255d6194dd.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on May 31, 2011, 11:38:00 AM
OOOOOOOOWW

Ow

Ow


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on May 31, 2011, 11:51:54 AM
Jeebus!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on May 31, 2011, 12:33:19 PM
Jeebus!
Not me in the photo (this time), but I've been there.



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 08, 2011, 06:36:42 AM
we need this in our area!!!

http://thekneeslider.com/archives/2011/06/08/automotorplex-garage-condos-for-the-serious-motorhead/ (http://thekneeslider.com/archives/2011/06/08/automotorplex-garage-condos-for-the-serious-motorhead/)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on June 08, 2011, 07:00:15 AM
we need this in our area!!!

http://thekneeslider.com/archives/2011/06/08/automotorplex-garage-condos-for-the-serious-motorhead/ (http://thekneeslider.com/archives/2011/06/08/automotorplex-garage-condos-for-the-serious-motorhead/)

That is awesome! If I could have that with a house on top, I would never go anywhere else!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 08, 2011, 07:55:53 AM
That is awesome! If I could have that with a house on top, I would never go anywhere else!

ummm...not so much....think of it as a storage unit facility for gearheads where you can work on your junk, look at it, park it, or whatever you want to do in regards to that stuff...all secured and no one of your neighbors there will complain about any noise....


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 08, 2011, 11:16:15 AM
ummm...not so much....think of it as a storage unit facility for gearheads where you can work on your junk, look at it, park it, or whatever you want to do in regards to that stuff...all secured and no one of your neighbors there will complain about any noise....

make the beast with two backsing hot out there!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on June 08, 2011, 11:34:32 AM
I really need to stop watching SBK races, they make me want to buy something like this http://washingtondc.craigslist.org/mld/mcy/2418594537.html (http://washingtondc.craigslist.org/mld/mcy/2418594537.html) and ride the shit out of it... [evil]

It's all Ben's fault!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 08, 2011, 12:14:34 PM
I really need to stop watching SBK races, they make me want to buy something like this http://washingtondc.craigslist.org/mld/mcy/2418594537.html (http://washingtondc.craigslist.org/mld/mcy/2418594537.html) and ride the shit out of it... [evil]

It's all Ben's fault!


At least that guy has dropped his price $500. You can tell the wife you're "saving money."  ;D ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 08, 2011, 01:04:46 PM
 [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 08, 2011, 05:31:29 PM
After a few more "additions" to lighten things up, I think this will be a good next step for the SC.

http://www.ferracci.com/store/cart.php?m=product_detail&p=756 (http://www.ferracci.com/store/cart.php?m=product_detail&p=756)

To be followed by Hyper race spec cams...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on June 09, 2011, 05:22:54 AM
Which would you do, the drop ins or big bore?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 09, 2011, 05:35:59 AM
Which would you do, the drop ins or big bore?

homey ain't no half asser...he do it all and do it big or he'll go home ( or more like all of the money he is thinking of spending he'll pour into his home)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 09, 2011, 05:51:45 AM
( or more like all of the money he is thinking of spending he'll pour into his home)

Spoken like a true home owner!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on June 09, 2011, 05:54:41 AM
Modding bikes seems expensive until you buy one of those damn things.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on June 09, 2011, 09:50:19 AM
Personally I think he should put that money into a Bar!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 09, 2011, 02:10:13 PM
Which would you do, the drop ins or big bore?

If I'm going that far, might as well punch it out while it's open.

Personally I think he should put that money into a Bar!

Money?  On a bar?  Hell son, you're doing that for free.   ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on June 10, 2011, 04:01:18 AM
Don't know if other states do this, but I thought it was a pretty cool idea: http://www.visitpa.com/pa-roadtrips (http://www.visitpa.com/pa-roadtrips)

I like how they group itineraries by theme (eg. Trail Mix, Fairway Drive), and display them in a cool simple way. [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on June 10, 2011, 09:52:25 AM
Very clever site. Speaking of road trips, I want to

(http://blog.derestricted.com/wp-content/uploads/2011/06/grosglockner-hochalpenstrasse.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 10, 2011, 11:32:17 AM
Very clever site. Speaking of road trips, I want to

(http://blog.derestricted.com/wp-content/uploads/2011/06/grosglockner-hochalpenstrasse.jpg)

don't you have to like....ooooo....buy a bike 1st?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on June 10, 2011, 01:01:22 PM
don't you have to like....ooooo....buy a bike 1st?

Yeah, yeah, I know.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on June 10, 2011, 04:05:06 PM
Drunk in Dewey, DE surrounded by the cast of Jersey Shore. More bronzer here than third place at the Olympics.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 10, 2011, 04:16:11 PM
Drunk in Dewey, DE surrounded by the cast of Jersey Shore. More bronzer here than third place at the Olympics.

Love Dewey....Jersey Shore...No so much!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: rgramjet on June 10, 2011, 06:04:51 PM
Drunk in Dewey, DE surrounded by the cast of Jersey Shore. More bronzer here than third place at the Olympics.

Did you hit the Taco Toss?  Please tell me you are going to Nicks for a steak and cheese and cheese fries after the festivities.  The short little hairy guy behind the counter is Mrs Nick.  She is 5', 200 lbs of hairy, Greek, cheesesteak making goodness.  I love that woman!   


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 11, 2011, 08:22:23 AM
<---- Hates making moving plans...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 11, 2011, 01:38:56 PM
<---- Hates making moving plans...

pay for mover to come in and pack you up the day before the move...then move it all and put it into place and all you have to do is sip your beer and point where you want things!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: bikepilot on June 11, 2011, 02:07:14 PM
Last move I made was Boston--> DC.  Had about as much crap as could possibly be squeezed into a 550sq ft apartment + 2 motorcycles.  I rented a big yellow truck and hired some moving "company" off craigs list in advance to load my stuff, which my wife had mostly boxed up (while I was writing my finals).  Well the movers never showed up, so I busted my butt hauling stuff.  We managed to get some other movers to help haul stuff for a few hours and had the truck loaded and ready to roll by about 3am.  Pilette was exhausted so we slept on the floor in our just-emptied apartment for a few hours and struck out in the morning. 

We eventually made it to DC with only modest drama.  We didn't have a place of our own so it all went in storage.  To unload I didn't want a repeat of the craigslist no-shows.  Instead I waved cash and krispy kreme at some ambitious high school students.  Those kids really moved and had it unloaded in half a day  [bow_down]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 12, 2011, 02:02:57 PM
10% beers are strong.  That is all...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on June 12, 2011, 05:50:11 PM
<---- Hates making moving plans...

http://www.collegehunkshaulingjunk.com/ (http://www.collegehunkshaulingjunk.com/)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 12, 2011, 06:30:35 PM
http://www.collegehunkshaulingjunk.com/ (http://www.collegehunkshaulingjunk.com/)
He's too busy surfing removed for general douchebaggery.  [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 13, 2011, 01:09:43 AM
Easy now speedy.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 13, 2011, 02:19:22 AM
Easy now speedy.

Damn! I forgot you mod-types could edit!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on June 13, 2011, 05:12:11 AM
Damn! I forgot you mod-types could edit!
For you Jim:
http://www.sadtrombone.com/ (http://www.sadtrombone.com/)

For you Ben:
http://www.twomarinesmoving.com/ (http://www.twomarinesmoving.com/)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on June 13, 2011, 06:01:43 AM
For you Jim:
http://www.sadtrombone.com/ (http://www.sadtrombone.com/)

For you Ben:
http://www.twomarinesmoving.com/ (http://www.twomarinesmoving.com/)

Nothing for me? Oh well, I'll just go ogle the college hunks...  [cheeky] [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on June 13, 2011, 07:31:01 AM
Nothing for me? Oh well, I'll just go ogle the college hunks...  [cheeky] [laugh]

Yeah... you seemed to have it "in hand"



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Geaux on June 13, 2011, 07:59:45 AM
removed for general douchebaggery.  [laugh]

Can you also please censor the comments that are offensive toward women, men, gays, trans, and general human beings?  Thanks!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on June 13, 2011, 08:36:57 AM
Can you also please censor the comments that are offensive toward women, men, gays, trans, and general human beings?  Thanks!

I'd just save time and delete the CAM board :D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on June 13, 2011, 08:44:40 AM
Can you also please censor the comments that are offensive toward women, men, gays, trans, and general human beings?  Thanks!

good luck with that; it's become a generally unfriendly place for a few of us!  Miss seeing you around - you  need to come by the house one of these days and sample the lychee martinis again!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on June 13, 2011, 09:06:29 AM
Can you also please censor the comments that are offensive toward women, men, gays, trans, and general human beings?  Thanks!

not helping.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Geaux on June 13, 2011, 10:06:16 AM
not helping.

Stat, did you mean you're letting the board moderate itself?  Or was I not helping the cause in some way?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 13, 2011, 12:43:43 PM
For you Ben:
http://www.twomarinesmoving.com/ (http://www.twomarinesmoving.com/)

Thanks Ian.



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on June 13, 2011, 05:23:21 PM
Stat, did you mean you're letting the board moderate itself?  Or was I not helping the cause in some way?

The local forums get away with setting their own tone more than the general section.  but I read your post as sarcastic and poking fun at Ben trying to keep things on the forum toned down a bit.

but whatever.... I'll give people shit over a beer.... it's easier.

This is only the internets and just not that important.   ;D  [beer]





Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 13, 2011, 05:44:51 PM
But on the flip side, there's no reason for things getting CDC-like in here. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on June 13, 2011, 06:03:00 PM
I dunno... there is this rash I wouldn't mind someone taking a look at...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on June 14, 2011, 05:00:39 AM
I dunno... there is this rash I wouldn't mind someone taking a look at...

It's called Baltimore. Move away and it'll clear up.



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on June 14, 2011, 05:14:24 AM
It's called Baltimore. Move away and it'll clear up.

I'd rather amputate. Baltimore is an awesome city.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Statler on June 14, 2011, 09:56:29 AM
Ian's just jealous because you live closer so can do more sailing this year.






once the rash goes away.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on June 14, 2011, 11:52:35 AM
Ian's just jealous because you live closer so can do more sailing this year.

I cry myself to sleep about it


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on June 14, 2011, 11:56:26 AM
Couldn't decide where to post this so it's going here... A friends non-profit has teamed with DucPond to raffle a new 2009 Troy Bayliss 1098R LE. Proceeds benefit 3 local charities. For more info visit http://www.horsepowercharities.org (http://www.horsepowercharities.org).


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 14, 2011, 01:33:27 PM
Almost had a moment today when the appraisal came back on the townhouse I'm trying to buy.  I was shocked when it was "valued" at $13K less than the agreed upon price in the contract.  I was even more shocked when the seller agreed to my post appraisal counter offer and was STILL willing to cough up $5k for closing costs.  I'm closing on Monday.



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 15, 2011, 03:18:15 AM
Almost had a moment today when the appraisal came back on the townhouse I'm trying to buy.  I was shocked when it was "valued" at $13K less than the agreed upon price in the contract.  I was even more shocked when the seller agreed to my post appraisal counter offer and was STILL willing to cough up $5k for closing costs.  I'm closing on Monday.


is that due to comps and foreclosures in and around there or because the bubble is still settling in a downward way?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 15, 2011, 02:16:21 PM
Mostly the comps.  The seller had recently redone the kitchen, and a few other upgrades, but none of the other recently sold properties had the same work done to them.  So his loss is my gain. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 20, 2011, 08:22:48 AM
Stupid Comcast.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 20, 2011, 09:40:09 AM
Stupid Comcast.

tweeting "COMCAST FAIL" and getting everyone to retweet it will get you pretty expediant action....trust me!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on June 20, 2011, 09:47:04 AM
oh Lars.....

some Ham Sammich inspiration!

http://www.ducatimonsterforum.org/index.php?topic=47868.0 (http://www.ducatimonsterforum.org/index.php?topic=47868.0)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: dolci on June 20, 2011, 11:51:58 AM
tweeting "COMCAST FAIL" and getting everyone to retweet it will get you pretty expediant action....trust me!

Seriously.  There were days when we moved in that every 5 minutes I would tweet my displeasure with #ComcastFAIL at the end of it. It didn't take very long before we were getting phone calls from highly placed folks asking how they could help.  We even ended up with a decent sized credit to our bill.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 20, 2011, 12:57:35 PM
Where's our newest home garage owner? Closing is over and I don't know where to drop my bike off for free service? [laugh] [laugh] [laugh] ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 20, 2011, 01:32:17 PM
My gripe with comcast is this:  I think it is completely silly that I have to turn my box in when I leave Alexandria, just to get another box when they come to hook it up in Occoquan.  It's not like it takes anything at all to set it up, just plug and play as long as the line is active...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 20, 2011, 01:45:05 PM
My gripe with comcast is this:  I think it is completely silly that I have to turn my box in when I leave Alexandria, just to get another box when they come to hook it up in Occoquan.  It's not like it takes anything at all to set it up, just plug and play as long as the line is active...
One word: FIOS


I had the ATT equivalent in WI and it was the cat's meow!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 20, 2011, 01:51:38 PM
Fios doesn't service the new area.  Besides, I haven't been all that impressed with what I saw of their service over at Roger's place.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 20, 2011, 02:16:34 PM
Fios doesn't service the new area.  Besides, I haven't been all that impressed with what I saw of their service over at Roger's place.

Really?! I've heard good things about it from my Bethesda peeps. U-verse (the ATT product) was awesome! Super fast internet, super clear television, more channels than the imaginary sky fairy, and was cheaper to boot!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 20, 2011, 02:45:26 PM
Really

(http://i192.photobucket.com/albums/z53/b_upton/facepalm/serious.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 20, 2011, 02:48:57 PM
Really

(http://i192.photobucket.com/albums/z53/b_upton/facepalm/serious.jpg)

Looks like that kid needs to borrow your posh pooper! [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 20, 2011, 02:49:41 PM
Just his serious face is all. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 21, 2011, 03:35:24 PM
Ok, so who wants to help me move the bikes down to Occoquan?   :D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 21, 2011, 03:36:51 PM
I'm in depending on when you're proposing this happens.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 21, 2011, 03:47:28 PM
Thanks Jim.  I'd like to maybe do it tomorrow evening/night.  Does that work for you?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 21, 2011, 03:56:38 PM
Thanks Jim.  I'd like to maybe do it tomorrow evening/night.  Does that work for you?

Das geht. I'm headed over that way to try on some gear at Ian's (likely around 530ish) and can head to your place right after if that works for you.

Warning: I've been watching supermoto videos this afternoon and can neither confirm nor deny that I've gotten "inspired." [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 21, 2011, 04:01:16 PM
Cool, thanks.  So who's the next contestant?   :D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on June 21, 2011, 06:18:34 PM
Whatcha need? I can help, but can't get down to you until around 7:30. Occoquan? Is that Pocahontas' sister?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on June 21, 2011, 06:23:07 PM
http://www.washingtonpost.com/blogs/the-buzz/post/catfish-caught-in-va-may-set-world-record/2011/06/21/AGKA9TeH_blog.html (http://www.washingtonpost.com/blogs/the-buzz/post/catfish-caught-in-va-may-set-world-record/2011/06/21/AGKA9TeH_blog.html)

 :o


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 21, 2011, 06:30:39 PM
Seven thirty would work. Jim is going to meet up with Ian earlier, and that time would work for all involved. I mainly need someone to either drive, or ride the bikes down for me. Riding them would probably be best, so I can bring a van load of junk down. I'll buy both of you guys dinner for helping out.   [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 22, 2011, 02:27:52 AM
Is that Pocahontas' sister?

Ben's van has a cage and I'll bring your tie-down straps, so we should be all set!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 22, 2011, 02:37:59 AM
Orrrrrr... If someone just happened to show up with a trailer... 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on June 22, 2011, 03:00:06 AM
Ok, so who wants to help me move the bikes down to Occoquan?   :D
well dibs on the SD if it's still available  [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 22, 2011, 03:15:23 AM
well dibs on the SD if it's still available  [evil]
I'll be climbing the washington monument and hopping off onto the whitehouse with it before riding across the waters of the potomac. ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 22, 2011, 03:17:15 AM
well dibs on the SD if it's still available  [evil]

Thanks, but I think it's covered with both Jim and Steve.  Unless of course you wanted to ride cupcake?  

Although, seeing the look on your face after the first series of backfires would be priceless.   [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on June 22, 2011, 03:24:51 AM
Unless of course you wanted to ride cupcake?
I'd rather be wearing a mankini on a pink tricycle pulled by the SD  [laugh] [cheeky]



Let me know if you need more help, tho. [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 22, 2011, 03:26:13 AM
Thanks, but I think it's covered with both Jim and Steve.  Unless of course you wanted to ride cupcake?  

Although, seeing the look on your face after the first series of backfires would be priceless.   [evil]

Time to buy a 3rd bike so you can take advantage of all your friends' generosity!

I'd rather be wearing a mankini on a pink tricycle pulled by the SD  [laugh] [cheeky]

I've got time today to find a tricycle and I'll even pitch in for glittery streamers on the handlebars! [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 22, 2011, 03:27:37 AM
I've got time today cause I gotz no job.

Fixed that for you.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on June 22, 2011, 03:28:47 AM
I've got time today to find a tricycle and I'll even pitch in for glittery streamers on the handlebars! [laugh]
I've got a mankini (and I know how to use it), so I guess we're all set! [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 22, 2011, 03:32:23 AM
 [puke]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 23, 2011, 06:13:42 AM
Back to touching my pipe in the heat!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on June 23, 2011, 09:00:28 AM
Back to touching my pipe in the heat!

Jim, while the thread says "Say Anything" I'm not sure they really meant anything  :o


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on June 23, 2011, 09:19:19 AM
Back to touching my pipe in the heat!

TMI TMI!


OH GOD

TMI!



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 23, 2011, 09:32:40 AM
I know you guys want the blow by blow of my exhaust installation... ;D

Speaking of...it's done with only 2 trips to the hardware store, one thumb/hammer/stainless steel incident :'( and a few flying springs. [bang] [bang]

Now all I have to do is reconnect the electrical things I undid to get to where I was going and slap the fairings back on before I can fire it up.

Stay tuned.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on June 23, 2011, 11:57:40 AM
One doesn't need fairings to make the bike go....


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on June 23, 2011, 12:36:54 PM
One doesn't need fairings to make the bike go....
One does if he doesn't disconnect the regulator/rectifier from its home on the fairing...one disconnect is easier than 3 screws!

I'm headed down with the laptop now to see how unhappy codes I have...hopefully, just the exup valve which is removed. I'll weigh this lard later and see if/how much weight it lost during this ordeal. Pics when I get back...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 23, 2011, 12:41:48 PM
Ah, so you loaded TuneECU as well? Have many people on the triumph board experimented with it?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on June 28, 2011, 02:10:59 AM
F3 anyone?

http://www.ducatimonsterforum.org/index.php?topic=50270.0 (http://www.ducatimonsterforum.org/index.php?topic=50270.0)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on June 30, 2011, 01:14:36 PM
Riding around Monza on CBR 1000 (w. ABS) and Pirelli Diablo Rain tires.

www.youtube.com/watch?v=kb-KNvbdXRA (http://)

I'm really amazed to see them do this. I've ridden through torrential downpours but I just can't believe these speed and angles.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on July 01, 2011, 04:01:00 PM
11 Hours on the Monster today. It seemed good when it started, but damn does my ass hurt!!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on July 01, 2011, 06:02:19 PM
11 Hours on the Monster today. It seemed good when it started, but damn does my ass hurt!!!!

Whoa! Yeah - I rode it about the same amount a few years ago up to Conn. There def. comes a point where no matter how you shift or lean it's too late. You could get one of those big sheepskin thingies  :P


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: TitanMonsterS4R on July 02, 2011, 03:13:36 AM
11 Hours on the Monster today. It seemed good when it started, but damn does my ass hurt!!!!

I use biking shorts with padding in the ass.  Helps big time


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on July 02, 2011, 10:14:34 AM
I use biking shorts with padding in the ass.  Helps big time

Just put a few tampons in your undies! Works miracles, don't ask how I know.  [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: TitanMonsterS4R on July 02, 2011, 04:54:03 PM
Just put a few tampons in your undies! Works miracles, don't ask how I know.  [laugh]

please elaborate....


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on July 03, 2011, 08:13:13 AM
please elaborate....

Please DON'T!



 ;)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on July 03, 2011, 02:38:34 PM
Saw a couple of nicely redone Nortons at North Beach on our way home. Wonder when our local guy is gonna get his buttoned up... ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 03, 2011, 03:16:16 PM
We also saw the same two bikes on Polling House Rd.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on July 03, 2011, 03:20:43 PM
We also saw the same two bikes on Polling House Rd.

Yep...I couldn't hear them though. ;D

Why don't we have a bleeding ears smilie? [bang] [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on July 04, 2011, 07:13:26 AM
Saw a couple of nicely redone Nortons at North Beach on our way home. Wonder when our local guy is gonna get his buttoned up... ;D

Almost there - only one or two things left to finish. The important bit is having a nice and orderly workspace!

(http://stevebacon.org/images/Norton/AlmostThere.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on July 04, 2011, 07:16:30 AM
Almost there - only one or two things left to finish. The important bit is having a nice and orderly workspace!

(http://stevebacon.org/images/Norton/AlmostThere.jpg)

I can't wait to see ride it! ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Blackboar19 on July 04, 2011, 10:03:59 AM
On Saturday afternoon's ride around Bowie/Davidsonville area I was talking to one of you guys about buying my Woodcraft clip ons....I hope you see this message.  send me an email at blackboar19@yahoo.com if you want them.

These fit 50MM bars and have a 2-1/2" rise.

http://www.woodcraft-cfm.com/cgi-bin/commerce.cgi?search=action&category=OOOX (http://www.woodcraft-cfm.com/cgi-bin/commerce.cgi?search=action&category=OOOX)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 04, 2011, 10:05:40 AM
I thought Billy got those from you.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 04, 2011, 11:40:52 AM
I'm hungry.  Who's hosting a BBQ?

 :D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on July 05, 2011, 02:03:34 AM
On Saturday afternoon's ride around Bowie/Davidsonville area I was talking to one of you guys about buying my Woodcraft clip ons....I hope you see this message.  send me an email at blackboar19@yahoo.com if you want them.

These fit 50MM bars and have a 2-1/2" rise.

http://www.woodcraft-cfm.com/cgi-bin/commerce.cgi?search=action&category=OOOX (http://www.woodcraft-cfm.com/cgi-bin/commerce.cgi?search=action&category=OOOX)

I think that was jdan...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 05, 2011, 04:44:03 PM
AMA is trying to get support rallying behind a bill prohibiting the Administrator of the EPA from authorizing the use of gasoline containing greater than 10 percent ethanol in certain vehicles.  Please go through this site and show your support.

http://capwiz.com/amacycle/issues/alert/?alertid=51059636&queueid= (http://capwiz.com/amacycle/issues/alert/?alertid=51059636&queueid=)[capwiz:queue_id]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on July 06, 2011, 01:58:45 PM
PICS..........PICS..........PICS..........

(https://lh6.googleusercontent.com/-kLrgHK0QfTY/ThTYx3NGyiI/AAAAAAAABmw/9QWnmNkbSro/s400/DSCN1624.JPG)
(https://lh3.googleusercontent.com/-fWYK5V-KSuY/ThTYzclt_QI/AAAAAAAABm0/2ZFNm-uiN1Y/s400/DSCN1625.JPG)
(https://lh4.googleusercontent.com/-7AfetHC59Ws/ThTYzmtJjDI/AAAAAAAABm4/mkJJwLKEews/s400/DSCN1626.JPG)
(https://lh4.googleusercontent.com/-3OuF7nm-mhE/ThTY0JdD7-I/AAAAAAAABm8/_bC9tJE7m5s/s400/DSCN1627.JPG)
(https://lh6.googleusercontent.com/-TDQ6ONYdulU/ThTY0v1H8NI/AAAAAAAABnA/iPtIkzlSvvU/s400/DSCN1628.JPG)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: 696DCRider on July 07, 2011, 01:34:55 PM
Nice!  Looks clean.  I see a sweet aftermarket exhaust in someone's future!

PICS..........PICS..........PICS..........

(https://lh6.googleusercontent.com/-kLrgHK0QfTY/ThTYx3NGyiI/AAAAAAAABmw/9QWnmNkbSro/s400/DSCN1624.JPG)
(https://lh3.googleusercontent.com/-fWYK5V-KSuY/ThTYzclt_QI/AAAAAAAABm0/2ZFNm-uiN1Y/s400/DSCN1625.JPG)
(https://lh4.googleusercontent.com/-7AfetHC59Ws/ThTYzmtJjDI/AAAAAAAABm4/mkJJwLKEews/s400/DSCN1626.JPG)
(https://lh4.googleusercontent.com/-3OuF7nm-mhE/ThTY0JdD7-I/AAAAAAAABm8/_bC9tJE7m5s/s400/DSCN1627.JPG)
(https://lh6.googleusercontent.com/-TDQ6ONYdulU/ThTY0v1H8NI/AAAAAAAABnA/iPtIkzlSvvU/s400/DSCN1628.JPG)



Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 08, 2011, 04:07:52 PM
So who in MoCo lost power?   [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on July 09, 2011, 03:13:25 PM
So who in MoCo lost power?   [evil]

Not me. Storm wasn't that bad where i am. Lot of rain in a short while but that's it.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on July 19, 2011, 04:49:49 PM
I have a Lockhart Phillips universal rear stand ( 'L' type rubber coated pads, not spools) for all dual sided bikes. It's in almost new condition and has been sitting around since I parted out the 900. Anyone interested let me know. Pics of a similar one here http://www.lockhartphillipsusa.com/store/product.php?productid=17037&cat=0&page=1 (http://www.lockhartphillipsusa.com/store/product.php?productid=17037&cat=0&page=1) difference is that mine isn't 3-pieces and is painted white.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on July 21, 2011, 01:34:10 PM
Mothermake the beast with two backser it's hot out there! I did a whole Bowie run minus the lunch stop at thursdays...just kept rolling to the end of daily nipple. Even managed to do the hardesty/christiana parran loop as well. Amazing how quick that's over when you're not stopping to shoot the shit at every gas station. ;D

Somebody find a sweating your balls of smiley...I need it!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 21, 2011, 02:04:11 PM
How'd it feel with the new suspension tweaks?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on July 21, 2011, 02:10:39 PM
How'd it feel with the new suspension tweaks?

Greatly improved. I'm going next week to get the appropriate springs...there's still some wonkiness in the front end when I'm braking hard but there's no more preload to be had with the stock springs.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on July 21, 2011, 02:12:32 PM
Did you take/get notes of the adjustments that were made?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on July 25, 2011, 01:03:16 PM
Well. I guess this shows Guzzis are for real men!

(http://stevebacon.org/images/Gasket.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on July 25, 2011, 01:07:14 PM
Well. I guess this shows Guzzis are for real men!

(http://stevebacon.org/images/Gasket.jpg)

Looks like this is more appropriate: http://en.wikipedia.org/wiki/Labrys (http://en.wikipedia.org/wiki/Labrys)

Particularly the last line of the "modern uses" section.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on July 27, 2011, 08:09:43 AM
am seriously thinking of selling my track Monster....I mean REALLY seriously...I can use the space and the $$$ a lot more than the bike right now....it needs a little love, and I am going to be realistic on pricing to reflect it.....think I am going to take pics of it this weekend for to enable the process further.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on August 04, 2011, 04:53:54 AM
SUCK!

(https://lh6.googleusercontent.com/-53Ma75AYXUk/TjqVbRsSPZI/AAAAAAAABsY/NHsku-5-0B4/s800/fml.png)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on August 04, 2011, 05:08:47 AM
Hey B...it could be worse....you could be on Fire!!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on August 04, 2011, 05:42:15 AM
4pm is open - that's enough time for an endoscopy. I hear they are fun...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 04, 2011, 05:15:26 PM
KTM sure was thinking when they put quick disconnect fittings on all fixtures around the fuel tank...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 05, 2011, 05:02:00 PM
Now that sure was a different noise...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 05, 2011, 05:09:31 PM
Now that sure was a different noise...
Did it sound like a motohooligan? [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 05, 2011, 05:38:00 PM
 [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on August 06, 2011, 07:23:34 AM
Hello from Seattle! ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 06, 2011, 07:25:56 AM
Hello from Seattle! ;D

That's the wrong Washington.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 06, 2011, 07:30:35 AM
Hello from Seattle! ;D
Don't you have a bike to be working on?!?


PS Bring presents from Ducati Seattle. I'd like an SF1100. ;D


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 07, 2011, 04:02:01 AM
Guess the humidity decided to come back seeing how it's August...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on August 07, 2011, 05:25:55 AM
It's pretty nice up here, similar to late spring weather in the DC area. A bit chilly in the mornings, tho. Oh, and the best part: lots of bikes! [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 07, 2011, 05:27:57 AM
Yea, the PacNW is nice.  How long are you up there?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: venomousr1993 on August 07, 2011, 07:30:03 AM
Just got back from San Diego...and this DC weather sucks.  Gonna try to talk to the monitor in getting permanent change of station orders back west. 


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 07, 2011, 02:25:12 PM
Miserable!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 07, 2011, 03:22:11 PM
Miserable!!
Smile! The sun is out now.







I'll flip myself off for you. [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 07, 2011, 03:26:33 PM
I'll flip myself off for you. [evil]

No need, I've got you covered.

(http://www.sherv.net/cm/emo/rude/1/flipping-the-bird.gif)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on August 08, 2011, 02:50:15 PM
Yea, the PacNW is nice.  How long are you up there?
Be back on Saturday. Chilling in Olympia now, while the wife enjoys her fame! [laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on August 08, 2011, 06:42:24 PM
Indiana sucks. Especially Rt 70, Rt 65, and Indianapolis. Ohio aint looking much better right now, but only an hour more of interslab before I hit better roads.

Massimo: if you get back to the city, hit up Smarty Pants in Georgetown (yes, Seattle is not only in the other Washington, but also has a Georgetown - but it is a heavy-industrial area and not a place of million dollar townhouses). If you're there later in the day tell Tim I said hi - he's got a super nice Paul Smart SC.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on August 09, 2011, 04:50:33 AM
Indiana sucks. Especially Rt 70, Rt 65, and Indianapolis. Ohio aint looking much better right now, but only an hour more of interslab before I hit better roads.

Massimo: if you get back to the city, hit up Smarty Pants in Georgetown (yes, Seattle is not only in the other Washington, but also has a Georgetown - but it is a heavy-industrial area and not a place of million dollar townhouses). If you're there later in the day tell Tim I said hi - he's got a super nice Paul Smart SC.

Did you ride that "classified" road in Ohio? Or is that on the way back? Be safe; keep the rubber down.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on August 09, 2011, 06:33:54 PM
Rode it both outbound and inbound, plus some other great roads. MD, VA, WV and SE Ohio have some great stuff. NW Ohio, Indiana and Illinois; fuggedahboutit. Either way, Guzzi handled them just fine (again) - just motors along. Not bad for a 36 year old bike with hacked up wiring. Did about 1000 miles out and 950 back. For some strange reason my left heel feels like there's a hole in it. I think my sock got bunched up in my boot or something. This medicinal beer is helping.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on August 11, 2011, 05:27:49 AM
I'm interested to see how this goes: A petition to restrict US Highway 129 to non-commercial vehicles (http://www.change.org/petitions/ikes-law-restrict-use-of-us-highway-129-to-non-commercial-vehicles).

Via: http://www.advrider.com/forums/showthread.php?t=715101 (http://www.advrider.com/forums/showthread.php?t=715101)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on August 11, 2011, 05:38:48 AM
I'm interested to see how this goes: A petition to restrict US Highway 129 to non-commercial vehicles (http://www.change.org/petitions/ikes-law-restrict-use-of-us-highway-129-to-non-commercial-vehicles).

Via: http://www.advrider.com/forums/showthread.php?t=715101 (http://www.advrider.com/forums/showthread.php?t=715101)

Sign it. I was out riding the morning the Triumph rider got snuffed. I decided to take Foothills Parkway to warm up (first ride of the trip) instead of the Tail. When I came back through the road was blocked off because of the accident. Nothing quite wakes you up like coming around a turn and seeing a semi across two lanes with no shoulders.

It's only a petition so I take it with a grain of salt that anything will happen, but something needs to be done about the truck traffic. We were talking about it down there and even an organized escort system would go a long way to solving the problem. I'm not a "ban it because it bothers me" person by any stretch, but there has to be a better way.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on August 11, 2011, 09:23:56 AM
my baby got me some BOMB Pie from the Dangerously Delicious Pie truck!!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: 696DCRider on August 11, 2011, 09:25:11 AM
That's some expensive pie.  I had the regular pie.  I would like to try some of the savory pie sometime though.
my baby got me some BOMB Pie from the Dangerously Delicious Pie truck!!!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: zooom on August 11, 2011, 09:27:28 AM
BOMB is a different animal....worth it!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 11, 2011, 02:18:01 PM
Wow.

eHarmony Video Bio (http://www.youtube.com/watch?feature=player_embedded&v=mTTwcCVajAc#)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 11, 2011, 02:45:28 PM
Wow.

eHarmony Video Bio (http://www.youtube.com/watch?feature=player_embedded&v=mTTwcCVajAc#)

How many replies have you sent her? [laugh] [laugh] [laugh] [laugh]

C'mon, you know you're a cat lover!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on August 11, 2011, 03:28:19 PM
Wow.
"... and I want them to be on a rainbow, and ... " therapy might not be optional.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on August 11, 2011, 03:57:55 PM
(http://www.threadbombing.com/data/media/2/LAMONT.gif)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on August 11, 2011, 06:12:48 PM
Wow.

Huh. So that's what the larval stage of the crazy cat lady looks like.

- if you want some extra fun, there's a songified version out there


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on August 13, 2011, 04:03:14 PM
F**K Southwest! Pulled a plane swap on us and we're stuck in Nashville for another hour and half.  >:( >:( >:(


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 13, 2011, 04:07:41 PM
F**K Southwest! Pulled a plane swap on us and we're stuck in Nashville for another hour and half.  >:( >:( >:(
At least they didn't put a heavy sticker on you like they do me! [laugh] [laugh] [laugh]

You in for the track day?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Jdan on August 14, 2011, 02:46:11 PM
I have 11 pounds of bacon in my fridge.....


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 14, 2011, 07:21:11 PM
Lars!!  Buy a Super Duke already would ya?  I've found your exhaust for you.

http://www.superduke.net/forum/viewtopic.php?f=10&t=17424&p=203550#p203550 (http://www.superduke.net/forum/viewtopic.php?f=10&t=17424&p=203550#p203550)

Superduke Mivv Suono ohne dbEater (http://www.youtube.com/watch?v=qLlIiqSui4A&feature=player_embedded#)

The guy is just down the road from us.

edit

Here's a new '08 for 9G.  Walk in there with cash and I'm sure you could get it for 8.5, if not less.

http://www.cycletrader.com/listing/2008-KTM-990-super-duke-98034849 (http://www.cycletrader.com/listing/2008-KTM-990-super-duke-98034849)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on August 15, 2011, 05:34:17 AM
F this F'ing rain in the F'ing A.

Took an hour and forty five to get to work this morning, didn't get above 20mph all the way from Parkville to Columbia. Torrential rain, hail, and morons in minivans.

The highlight though was definitely seeing a crab trap float bobbing along the side of 95. Should have brought some chicken necks, could have had breakfast.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on August 15, 2011, 06:31:32 AM
The highlight though was definitely seeing a crab trap float bobbing along the side of 95. Should have brought some chicken necks, could have had breakfast.

For real? WTF was a crab pot doing out on 95?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on August 15, 2011, 06:38:54 AM
Well it was only the float, but they bounce out of trucks all the time. I felt like I was out on Seneca Creek.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on August 15, 2011, 10:10:40 AM
The highlight though was definitely seeing a crab trap float bobbing along the side of 95. Should have brought some chicken necks, could have had breakfast.

Don't forget the Old Bay!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 16, 2011, 02:12:54 PM
Harwood was good today!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on August 18, 2011, 01:49:24 PM
So I scored a goldline 320mm 2-pad setup in exchange for services (let your imagination do the walking). I was planning on just sticking with the coffins because I really dig the simplicity of the look and reports that the performance difference is minor. Ben however has thrown a wrench in the gear by claiming that the radial masters will perform much better. Yet I read another post where the Saddest of Pandas claims he used the coffins and they were just dandy.

I know the radials flex less, but for street use (and the extremely rare track day) does having more immediate braking outweigh a softer pull? I would think the coffins would offer a bit more modulation because of their flex.

Food for thought: http://www.ducati.ms/forums/80-hall-wisdom/27159-conventional-axial-vs-radial-master-cylinders.html (http://www.ducati.ms/forums/80-hall-wisdom/27159-conventional-axial-vs-radial-master-cylinders.html)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 18, 2011, 02:36:03 PM
It's not really about the immediate "OH SHIT" that you can get with radials that I was referring to.  You get both better modulation and/or more power with the radials.  It all depends on which piston size you go with, and how those pistons relate to the ones in the calipers.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on August 18, 2011, 04:15:20 PM
Got my jury duty summons postponed so's not to interfere with my deep creek weekend. [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 18, 2011, 04:16:59 PM
Got my jury duty summons postponed so's not to interfere with my deep creek weekend. [evil]

 [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: 696DCRider on August 18, 2011, 04:18:12 PM
I'm considering rolling on that trip.  I have no days off though so I would have to head back on Sunday.
Got my jury duty summons postponed so's not to interfere with my deep creek weekend. [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on August 18, 2011, 05:12:24 PM
I'm considering rolling on that trip.  I have no days off though so I would have to head back on Sunday.

Ya, the fun stuff is on Sunday. Wouldn't be worth it in your case; you'd just be doing an out-n-back.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on August 19, 2011, 05:36:33 AM
My opinion is that for our level of riding, anything above drum brakes is good enough (insert here obvious caveats). Everything else is just different degrees of icing on the cake.

Would I go with radial masters and calipers? Hell yea! Would I spend in excess of $1k for the parts? F**K no! For my level of riding it's just not worth it. I'm not saying that the radials are not worth the money, I'm sure I would notice the difference and I would love it. But conventional are just fine, after all that's what Ducati had on their SuperBikes in the 90s and it didn't keep them from winning. Before I get radials, I need to loose 20 pounds and invest in riding school, then I can think about taking seconds off my lap times.


Caveat: of course if I find some nice stuff for the cheap on eBay, well....  ;) [cheeky] [laugh]

So I scored a goldline 320mm 2-pad setup in exchange for services (let your imagination do the walking). I was planning on just sticking with the coffins because I really dig the simplicity of the look and reports that the performance difference is minor. Ben however has thrown a wrench in the gear by claiming that the radial masters will perform much better. Yet I read another post where the Saddest of Pandas claims he used the coffins and they were just dandy.

I know the radials flex less, but for street use (and the extremely rare track day) does having more immediate braking outweigh a softer pull? I would think the coffins would offer a bit more modulation because of their flex.

Food for thought: http://www.ducati.ms/forums/80-hall-wisdom/27159-conventional-axial-vs-radial-master-cylinders.html (http://www.ducati.ms/forums/80-hall-wisdom/27159-conventional-axial-vs-radial-master-cylinders.html)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Artful on August 19, 2011, 05:53:32 AM
Agreed on all points for the most part, though I feel like there are definitely times where I could use a little more binder entering a turn. For street riding not a really big deal because I leave plenty on the table for unforeseen circumstances, but I swear I'm going to do a friggin trackday next season. The brakes on the 695 are seriously laughable. This year on the Tail it was blatantly obvious that they just don't have the guts needed to really go for it on the track.

I definitely wouldn't invest in a set of radial calipers for the bike, especially since I have a shiny new (to me) set of 2-pad 4-pots and rotors. I was considering going with a radial master cylinder though. The current plan is to stick with my current setup initially and if it feels 'off' to try the radial master.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: 696DCRider on August 19, 2011, 06:53:44 AM
That's good to know.  I guess I won't bother then being that I can't take Monday off.
Ya, the fun stuff is on Sunday. Wouldn't be worth it in your case; you'd just be doing an out-n-back.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on August 19, 2011, 08:48:36 AM
Random youtube vid.

www.youtube.com/watch?v=ZuX6s-95hb0 (http://)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 21, 2011, 11:29:31 AM
Glad I'm inside and dry instead of outside
(http://icanhascheezburger.files.wordpress.com/2007/01/1162259616246.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 21, 2011, 02:42:46 PM
Yea... Rained for half an hour and then got nice again. Kind of ironic that I was just mentioning Hawaii summer (you know, all year long) showers yesterday afternoon.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on August 23, 2011, 10:28:48 AM
Seriously? Evacuate? Ugh. I'm taking my helmet with me...


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 23, 2011, 10:35:31 AM
Yep. On the way home now.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: tocino on August 23, 2011, 10:37:01 AM
Man, I thought that was Gene revving out his S2R!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on August 23, 2011, 10:48:58 AM
Yep. On the way home now.

Lucky. They shushed us about for a little bit, but we're back in


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 23, 2011, 11:43:58 AM
Best part of working for the gubment.   [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: 696DCRider on August 23, 2011, 11:49:15 AM
Yup, I was onsite at the IRS building today and they closed the building.  Now I'm sitting on my couch relaxing.
Best part of working for the gubment.   [thumbsup]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: The Mad King Pepe' on August 23, 2011, 12:26:56 PM
I won't say what's the best part of riding a bike when the city is in complete chaos....  [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: 696DCRider on August 23, 2011, 12:31:58 PM
Lane splitting?  Cutting through the small gaps of pedestrians crossing the street?  I didn't ride today, but this is what I am picturing given the chaos I saw in Chinatown.


I won't say what's the best part of riding a bike when the city is in complete chaos....  [evil]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 23, 2011, 12:38:24 PM
I won't say what's the best part of riding a bike when the city is in complete chaos....  [evil]
Seems we had similar commutes. Who knew the daytona had supermoto mode? [evil]

Lane splitting?  Cutting through the small gaps of pedestrians crossing the street?  I didn't ride today, but this is what I am picturing given the chaos I saw in Chinatown.
lane splitting is the least of it. I took a couple of sidewalk trips on 4th NW to get to New York Ave from Rhode Island Av.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Autohag on August 23, 2011, 01:14:25 PM
I rode to Mineral, VA. It's nice here.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 23, 2011, 01:39:04 PM
WTF is up with the weather forecast? Beautiful during the week, then transitioning to sporadically shitty for the weekend AGAIN!!


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on August 23, 2011, 02:15:39 PM
WTF is up with the weather forecast? Beautiful during the week, then transitioning to sporadically shitty for the weekend AGAIN!!

This time it's Irene... current projections have it riding up just of the east coast - so looks like we'll be in for some crappy crap crap weather.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 27, 2011, 10:05:27 AM
(http://i192.photobucket.com/albums/z53/b_upton/Moto/SDrearsetbox.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Slide Panda on August 27, 2011, 10:12:37 AM
Attack Performance?

Oh wazzat?


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 27, 2011, 10:58:10 AM
(http://i192.photobucket.com/albums/z53/b_upton/Moto/SDbrakerearset.jpg)

(http://i192.photobucket.com/albums/z53/b_upton/Moto/SDgearrearseton.jpg)


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 27, 2011, 11:39:45 AM
Attack Performance?

Oh wazzat?

Dat delishus!! [drool] [drool] [drool]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 27, 2011, 11:45:26 AM
Now a quick trip to the depot is in order. Need to get the correct bolt to connect the rear master cylinder to the rear set.  Sure would have been nice if they had sent that too.


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: Meerkat on August 27, 2011, 12:07:15 PM
Now a quick trip to the depot is in order. Need to get the correct bolt to connect the rear master cylinder to the rear set.  Sure would have been nice if they had sent that too.
No good mod is complete without a trip to the despot... [bang]


[laugh]


Title: Re: CAM Say Anything (not quite so official) Thread
Post by: DRKWNG on August 27, 2011, 02:28:49 PM
No good mod is complete without a trip to the despot...

Tell me about it.  The despot wasn't much help, but the Lowes across the street was.  Or at least I thought they were.  Turns out the bolt is just a hair too large (diameter wise) to fit through the heim joint on the master cylinder.   [thumbsdown]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on August 27, 2011, 03:06:10 PM
a bottle of wine, hot peppers and eye balls do NOT mix!!!!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on August 28, 2011, 09:33:10 AM
Ben boltdepot.con

At least you kept the pepper issues above the waist


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on August 28, 2011, 12:40:59 PM
Ben boltdepot.con

Thanks. I had already looked there, but wanted to find something local. It's "rigged" up now, but could be a bit better.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: MadDuck on August 28, 2011, 06:13:05 PM
No modification goes unpunished.  ;D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on August 28, 2011, 06:23:14 PM
No modification goes unpunished.  ;D

Bite me.   ;D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Jdan on August 29, 2011, 02:59:19 PM
Back to school. Goodbye Maryland!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on August 29, 2011, 05:20:48 PM
Mildly interesting view from my window:
(http://i154.photobucket.com/albums/s255/jimwatsondc/Ducati/2011-08-29_21-13-57_943.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: 696DCRider on August 29, 2011, 07:46:09 PM
Damn.  That's like the tenth floor.  I wonder what was going on there.

Mildly interesting view from my window:
(http://i154.photobucket.com/albums/s255/jimwatsondc/Ducati/2011-08-29_21-13-57_943.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on August 30, 2011, 02:35:48 AM
Cat-based emergency.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on August 30, 2011, 05:28:39 AM
Who's got power?

<--- This guy.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on August 30, 2011, 05:33:15 AM
You toss everything out from the fridge yet?

FYI - your insurance might cover the loss. *might*


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on August 30, 2011, 05:45:27 AM
No need, we put anything that would spoil in the stand up freezer and packed that with ice. Some things thawed but it was all very cold. The bags of ice were barely melted.

I'm happy to report the beer is once again cold.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on September 02, 2011, 04:18:45 PM
For Lars

(http://www.sharewallpapers.org/d/582727-2/KTM+950+Supermoto+2005+14.jpg)
(http://www.sharewallpapers.org/d/582691-2/KTM+950+Supermoto+2005+02.jpg)
(http://images.motorcyclistonline.com/roadtests/122_0606_01_z+2006_ktm_950_supermoto+catterson_action.jpg)
(http://www.carsbase.com/photo/KTM-950_Supermoto_mp109_pic_28527.jpg)





























































 [evil]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on September 03, 2011, 04:20:49 PM
dremel + aluminium sheets =  ;D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: FatguyRacer on September 04, 2011, 08:38:34 AM
I have 11 pounds of bacon in my fridge.....

How much do you have now?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 08, 2011, 05:32:56 AM
I am utterly and entirely tired of goddamn rain.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on September 08, 2011, 05:37:14 AM
I am utterly and entirely tired of goddamn rain.

I am wondering if I should stop by HTO or REI to pick up an inflatable raft and BassPro for a lil outboard motor for commuting to work...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Autohag on September 08, 2011, 05:52:01 AM
(http://www.cigaretteracing.com/images/lifestyle/shows_and_events/2011_ducati/001.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on September 08, 2011, 06:33:15 AM
I am utterly and entirely tired of goddamn rain.

I hear that. My basement flooded last night when the drain couldn't handle the downpour. Must've rained like hell for a bit. A tree around the corner came down too. Missed this guys house by a few feet, but got his truck. Can we get a summer-do-over?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on September 08, 2011, 06:37:05 AM
Can we get a summer-do-over?

I'll take that...one of the best summers ever. No work...bike everyday...days on track...round 2, I'm ready! ;D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on September 08, 2011, 06:42:18 AM
Jim, you are not making things any better!















 ;D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 08, 2011, 06:53:24 AM
I hear that. My basement flooded last night when the drain couldn't handle the downpour. Must've rained like hell for a bit. A tree around the corner came down too. Missed this guys house by a few feet, but got his truck. Can we get a summer-do-over?

Not to revel in your misery but that DOES make me feel a little better. It was heavy enough that I found a small leak in the roof above the kitchen which I'm hoping is just a leak around the flashing that can be sealed. I also have water in the basement but the sump is keeping up so it's just a slight trickle across the floor that is being handled. My basement is concrete slab so it isn't a big deal.

I've been working on house projects since May and it just seems like as soon as one is finished the next begins. Not that that surprises me, but the projects are getting more expensive and out of my skill set. I'm not eating ramen yet, but if the roof needs major repair I might have to start selling sexual favors.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on September 08, 2011, 07:14:06 AM
I'm not eating ramen yet, but if the roof needs major repair I might have to start selling sexual favors.
Brain bleach, please!
(http://worldofwonder.net/2010/07/29/81a1f730.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 08, 2011, 07:30:36 AM
PLEASE! I am not that fat and look far better in a wig and tassels.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: extra330 on September 08, 2011, 07:33:08 AM
If you need a second opion drop me a line, I'd be happy to take a look and give you some free advice.

Just happen to be a custom home builder don't you know. unfortunaly not a very busy one at the moment, care to share a cup of ramen noodles?  ;D

Mike




I've been working on house projects since May and it just seems like as soon as one is finished the next begins. Not that that surprises me, but the projects are getting more expensive and out of my skill set. I'm not eating ramen yet, but if the roof needs major repair I might have to start selling sexual favors.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 08, 2011, 07:35:26 AM
If you need a second opion drop me a line, I'd be happy to take a look and give you some free advice.

Just happen to be a custom home builder don't you know. unfortunaly not a very busy one at the moment, care to share a cup of ramen noodles?  ;D

Mike

May take you up on that. I can frame and drywall but I tend to not screw with roofs just because of the potential of a reaaaaally expensive make the beast with two backs up. I'd gladly pay you for your time so that you can go out and at least get the GOOD ramen noodles.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on September 08, 2011, 02:33:05 PM
I'd gladly pay you for your time so that you can go out and at least get the GOOD ramen noodles.

+1  I'll be looking to do some renovations to the place that I just bought in the near(ish) future.  Do you do interior work as well?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Lars D on September 08, 2011, 04:17:35 PM
Black is extra special nice!!!!
For Lars

(http://www.sharewallpapers.org/d/582727-2/KTM+950+Supermoto+2005+14.jpg)
(http://www.sharewallpapers.org/d/582691-2/KTM+950+Supermoto+2005+02.jpg)
(http://images.motorcyclistonline.com/roadtests/122_0606_01_z+2006_ktm_950_supermoto+catterson_action.jpg)
(http://www.carsbase.com/photo/KTM-950_Supermoto_mp109_pic_28527.jpg)





























































 [evil]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on September 09, 2011, 10:36:24 AM
THE BEATLES- HERE COMES THE SUN (http://www.youtube.com/watch?v=U6tV11acSRk#)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on September 09, 2011, 11:20:05 AM
Careful out there! I just looked out and there something burning up in the sky! I looked on the news and didn't see a mention. I think it's some kinda thermonuclear conflagration in outer space. Felt warm on my skin. Scary.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on September 09, 2011, 12:23:11 PM
Its singeing me!!

(Love that commercial)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on September 11, 2011, 03:16:28 PM
Stoopid Buell.

(http://i192.photobucket.com/albums/z53/b_upton/Moto/photo-3.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 11, 2011, 03:18:52 PM
el oh el.

It's reducing its own weight. It has quite a ways to go.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on September 12, 2011, 10:10:56 AM
Although the demonic leader of our ride yesterday wouldn't let me stop, I saw the most tanatalizing restaurant:
(http://virginiatrails.files.wordpress.com/2011/07/fat-boys.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 12, 2011, 10:12:25 AM
I want all of that.

You're really helping the diet... prick.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on September 13, 2011, 06:25:03 AM
I need a DS bike (just reiterating)....

Riding around Sugarloaf Mtn. (http://www.youtube.com/watch?v=ICfGtIWjV-4#)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 13, 2011, 06:46:53 AM
Think you could reach the ground?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on September 13, 2011, 06:50:19 AM
Think you could reach the ground?
???


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 13, 2011, 06:56:50 AM
Well with DS standover being what it is... and you being... you..






















You're short.  :P


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Autohag on September 13, 2011, 07:46:20 AM
Lunch? Ima be here from 1215'ish to 115'ish: http://www.shakeshack.com/ (http://www.shakeshack.com/)

PM if you're in the 'hood (18th street) and can join.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on September 13, 2011, 11:12:19 AM

You're short.  :P
But I have weight on my side! 8)


And I'm not alone!  [cheeky] [laugh] [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 13, 2011, 11:13:49 AM
I'm down six pounds since the beginning of Operation: Eat Less Move More so get the fat jokes in while you can little buddy :)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on September 13, 2011, 11:22:11 AM
You can slim down for sure - but you'll always have those small, girlish hands


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 13, 2011, 11:29:14 AM
They're a blessing. Every bolt I've dropped into a Volkswagen's bodywork and was able to retrieve? Every impossibly hidden fastener I was able to get a tool on? Try doing that yourself ham hand.  ;D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on September 13, 2011, 11:41:22 AM
(http://4.bp.blogspot.com/-xW1I3i3w4n4/TcLiwemmUhI/AAAAAAAAADU/EpaUhgfPeZc/s320/Magnetic+pick+up+tool.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 13, 2011, 11:44:46 AM
I tell you what, you use that thing to remove the center console screws on a 3rd Gen MR-2 Spyder and I'll break my hands with a ball peen hammer.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on September 13, 2011, 01:09:40 PM
http://hosted.ap.org/dynamic/stories/U/US_BURNING_CAR_HEROES?SITE=AP&SECTION=HOME&TEMPLATE=DEFAULT&CTIME=2011-09-13-16-39-33 (http://hosted.ap.org/dynamic/stories/U/US_BURNING_CAR_HEROES?SITE=AP&SECTION=HOME&TEMPLATE=DEFAULT&CTIME=2011-09-13-16-39-33)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Autohag on September 13, 2011, 04:23:33 PM
http://hosted.ap.org/dynamic/stories/U/US_BURNING_CAR_HEROES?SITE=AP&SECTION=HOME&TEMPLATE=DEFAULT&CTIME=2011-09-13-16-39-33 (http://hosted.ap.org/dynamic/stories/U/US_BURNING_CAR_HEROES?SITE=AP&SECTION=HOME&TEMPLATE=DEFAULT&CTIME=2011-09-13-16-39-33)

Renewed faith in humankind for a few hours...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on September 13, 2011, 07:32:57 PM
My opinion is that people are generally good, but crowds aren't (too often people wait for someone else to act). What's awesome about the video is the people you see running up to help with an attitude of "this is some serious sh!*" - and not just standing and watching.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on September 14, 2011, 06:42:55 AM
Many times people just don't know what to do these days and lack the initiative to just try something. So they stand around looking a bit dense. Toss someone in with a clue, the ability to direct or what seems a good plan and folks will chip in.

I wonder if our consumer society contributes to the above... Folks are to used to having someone else do the work for them.. all they know how to do is hand over cash. They have no reserve of knowledge from doing it yourself.



Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 14, 2011, 06:46:58 AM
Folks are to used to having someone else do the work for them.. all they know how to do is hand over cash. They have no reserve of knowledge from doing it yourself.

Ding.

That's why I own a lot of tools, a lot of guns, and am well versed in the use of all of them. Thanks Dad.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on September 14, 2011, 07:14:41 AM
That's why I own a lot of tools, a lot of guns, and am well versed in the use of all of them. Thanks Dad.

But you don't have one of these
(http://4.bp.blogspot.com/-xW1I3i3w4n4/TcLiwemmUhI/AAAAAAAAADU/EpaUhgfPeZc/s320/Magnetic+pick+up+tool.jpg)

Yeah I find it absurd how many folks toss stuff out as 'broken'. I know I've fixed up a number of items for folks over the years. Most times its something so simple but they just never try.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 14, 2011, 07:24:25 AM
But... I do own one of those...?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on September 16, 2011, 05:56:20 AM
Brian (aka skunk boy) needs these!!

Spark High Oval Dark Slip-on: S4R('03-06)/S2R 800/S2R 1000 (http://www.motowheels.com/italian/myProducts.cfm?parentcategoryid=2212%7CMonster%20Exhaust%20S2R%2FS4R%2FS4RS&productID=9156&showDetail=1&categoryID=2214|Monster%20Exhaust%20S2R%2FS4R%2FS4RS%3A%20SLIP%2DON%20SYSTEMS&vendoridtodisplay=0&filterFor=&collection=168%7CEuropean%20Motorcycle%20Parts")
Sale Price: $828.00
List Price: $920.00


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Autohag on September 16, 2011, 10:11:02 AM
Brian (aka skunk boy) needs these!!


Those are nice. I dunno... _IF_ I keep this bike I'll likely go with BoomTubes or something of the ilk.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on September 16, 2011, 10:38:19 AM
Kinda funny:
2nd free MotoGP practice at Aragon canceled due to power outage.

Pretty frikkin interesting:
Rossi is using the *new* aluminum frame (made by FTR) on the Desmosedici this weekend. Basically the headstock/airbox is AL instead of carbon and supposedly the spars are longer (but it is not a perimiter frame as rumored - the engine is still a stressed member). They are basically saying the rest of the season is really just being used as development for 2012. On one hand this make sense since testing restrictions are so tight now, on the other hand Rossi+Ducati don't go racing to lose.

And yes Wayne, I said "member"


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on September 20, 2011, 08:00:48 AM
RAIN SUCKS!!!!
That is all.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on September 20, 2011, 10:03:55 AM
RAIN SUCKS!!!!
That is all.
Man-up you nancy! [cheeky]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on September 20, 2011, 03:57:56 PM
Ronnie Johns - Chopper - Harden the make the beast with two backs Up (http://www.youtube.com/watch?v=unkIVvjZc9Y#)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on September 20, 2011, 06:45:48 PM
"Attention! Attention! An emergency condition exists! Please proceed to the nearest stairwell exit! Do not use the elevators! [Siren] [Siren]"
(http://i154.photobucket.com/albums/s255/jimwatsondc/Ducati/2011-09-20_22-25-48_687.jpg)
Whoever came up with talking fire alarms SUCKS!!!!!!!!!! Strange male voices should not be heard in my house as I'm falling asleep!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 21, 2011, 04:37:02 AM
Quote
Strange male voices should not be heard in my house as I'm falling asleep!

... does that mean you don't want me to come down and read you bedtime stories anymore?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on September 21, 2011, 06:07:37 AM
"An emergency condition exists!"

That's hilarious. Like the blaring horn / flashing lights don't convey that well enough. What genius thought that up? It better be bilingual or else somebody is going to sue! :)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 21, 2011, 06:15:55 AM
I just want something that screeches Murder Death Kill like in Demolition Man.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on September 26, 2011, 12:28:45 PM
Sounds like Jim tried to blow himself up today.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 26, 2011, 12:57:11 PM
Whatta what now?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on September 26, 2011, 01:13:05 PM
Sounds like Jim tried to blow himself up today.

This a fat joke or sumpin? Did he put nitrous on the S2R?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on September 26, 2011, 01:29:46 PM
Sounds like Jim tried to blow himself up today.
Or did he run out of gas again and instead of pushing the bike, decided to fart in the tank? [laugh]



Jokes aside, I hope it's nothing serious!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on September 26, 2011, 01:30:54 PM
Explosion at the UofM chemistry building this afternoon.

He's ok though.  I heard from him earlier.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Artful on September 26, 2011, 01:33:04 PM
I heard this was the project he was working on...

(http://www.photobasement.com/wp-content/uploads/2008/02/fatmantomars.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on September 26, 2011, 02:17:03 PM
What a make the beast with two backsing disaster day!!!

Here I am torturing my students with their first exam of the semester...35 minutes in, the fire alarms go off. make the beast with two backs!! Those damn freshmen are trying to get out of another chemistry exam (obviously this is not an unusual occurrence). Collect exams and head outside...hoping it would be a quick.  After an hour, the fire officials announce that it will take at least 3-4 hours to decontaminate the area so we can't return to our offices or anything reasonable.

make the beast with two backs!!! My helmet, boots and keys are in my office...I can see through the window to where they're setting on my file cabinet...and all I get to do is sit there holding exams that won't ever be graded. Now I have to write another exam to give so they can actually finish them (I'll fix this problem in my next syllabus!) and the order that I needed for Wed's lab didn't get ordered because the ordering folks were outside sitting on the sidewalk as well. AAAARRRRRGGGGHHHHH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Who knew PG county could afford an Office of Homeland Security after all the money their politicians have stolen recently?!?
(http://i154.photobucket.com/albums/s255/jimwatsondc/Ducati/2011-09-26_13-43-36_638.jpg)
(http://i154.photobucket.com/albums/s255/jimwatsondc/Ducati/2011-09-26_13-44-08_899.jpg)

Just so I don't seem totally self-absorbed (I really am and I'm not afraid to admit it): the two injured students were treated for minor cuts and acid burns but will be OK.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on September 26, 2011, 04:27:44 PM
Hell Yeah!!

New exam is written and ready to go!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Jdan on September 26, 2011, 07:07:10 PM
Hell Yeah!!

New exam is written and ready to go!

Someone needs to blow up my chemistry building and get me out of tomorrow's exam.....


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on September 26, 2011, 07:21:02 PM
Someone needs to blow up my chemistry building and get me out of tomorrow's exam.....

The second ones are always harder. [evil] ;D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Jdan on September 26, 2011, 08:01:47 PM
Was it a serious explosion or was the whole thing just blown out of proportion?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 05, 2011, 03:05:05 PM
Wonder if I can cram this thing into a glove...

(http://i192.photobucket.com/albums/z53/b_upton/photo-8.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on October 05, 2011, 04:31:35 PM
Wonder if I can cram this thing into a glove...

(http://i192.photobucket.com/albums/z53/b_upton/photo-8.jpg)

Ya gotta keep the pimp hand strong in order to avoid such an apparatus......




What happened?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 05, 2011, 05:04:45 PM
Side effects from the off I had a few weeks ago.  Two hairline fractures; one in the wrist and one in the hand.  I've been having sporadic numbness in m hand since, and seeing how it didn't seem to be getting any better, i went to the doc.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on October 05, 2011, 05:17:47 PM
ouch.

primary or secondary hand/wrist?

 ;D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 05, 2011, 05:19:19 PM
primary or secondary hand/wrist?

 ;D

Depends on the activity.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on October 05, 2011, 05:24:24 PM
beer drinking.   der.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 05, 2011, 05:29:37 PM
Ambidextrous    [thumbsup]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on October 05, 2011, 07:24:05 PM
Two hairline fractures; one in the wrist and one in the hand.

Get well soon! On the bright side you didn't break it at the beginning of the season.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on October 06, 2011, 04:30:19 AM
Wonder if I can cram this thing into a glove...

(http://i192.photobucket.com/albums/z53/b_upton/photo-8.jpg)
heh, started wearing one of those when I was commuting to work on the 748... [bang]

BTW, switching from a mouse to a trackball helped a lot.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 06, 2011, 12:58:46 PM
BTW, switching from a mouse to a trackball helped a lot.

I use one of these both at home and at work.

(http://www.butyoudontlooksick.com/wpress/wp-content/uploads/2011/02/idhp-logitech-trackman-wheel.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 09, 2011, 03:59:16 AM
"Michele Bachmann": a BLR Soundbite (http://www.youtube.com/watch?v=LFB6LQ1-WKU#)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on October 09, 2011, 04:34:26 AM
BLR FTW! Beats autotune the news hands down.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on October 11, 2011, 06:08:00 AM
Sugar fountain fairey huh?

Paranormal Attack Warning And Psychic Battle. PARANORMAL ACTIVITY (http://www.youtube.com/watch?v=DnM1G8S2uF4&feature=player_embedded#)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on October 11, 2011, 08:13:17 AM
BLR FTW! Beats autotune the news hands down.

hah! - I'd managed to miss any BLR stuff until that. Must not waste more time... *sigh*


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on October 11, 2011, 02:48:24 PM
met a couple guys at Battly's today (it's right next door to Competizione).  I met Sam on facebook previously so it was good to see in person.

great guys in the sales dept.  don't know anyone in service, but as I'll be in that area a lot because of the car I may make introductions. 

Looking forward to riding with Sam and Brian.   

cheers, guys.  Thanks for making it a fun drive out to Gaithersburg.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 11, 2011, 03:02:32 PM
Just don't let them "lift" your bike by the exhaust.  [roll]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on October 11, 2011, 03:15:05 PM
Just don't let them "lift" your bike by the exhaust.  [roll]

oh shit...


no... I think if they do anything it'll be a written statement for one specific guy etc.etc.  (not my first legal Duc service rodeo).

but nice place to hang out and have coffee while I'm throwing thousand dollar bills at Competizione. (it's like Duc stuff but multiplied by 10...or 100.  make the beast with two backs me)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 11, 2011, 03:24:05 PM
Except that Mondial has service intervals base in yards instead of miles.   ;D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on October 11, 2011, 03:34:39 PM
Except that Mondial has service intervals base in yards instead of miles.   ;D

laugh it up, fuzzball.

<kisses Leah>

<ashamed by geeky reference>

<sort of>


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 12, 2011, 09:47:11 AM
laugh it up, fuzzball.

<kisses Leah>

<ashamed by geeky reference>

<sort of>


you forgot to insert the Wookie howl....


BTW...Han shot 1st!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on October 12, 2011, 09:56:40 AM
BTW...Han shot 1st!

For real. F those history revisionists.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on October 12, 2011, 10:04:43 AM
I can hear it in my head but didn't figure out a good spelling.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: TitanMonsterS4R on October 12, 2011, 10:07:14 AM
met a couple guys at Battly's today (it's right next door to Competizione).  I met Sam on facebook previously so it was good to see in person.

great guys in the sales dept.  don't know anyone in service, but as I'll be in that area a lot because of the car I may make introductions. 

Looking forward to riding with Sam and Brian.   

cheers, guys.  Thanks for making it a fun drive out to Gaithersburg.

Go on a Saturday and they've got Krispy Kreme donuts.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 12, 2011, 11:32:56 AM
Go on a Saturday and they've got Krispy Kreme donuts.

Bobs BMW has Dunkin Donuts on Saturdays...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 12, 2011, 11:33:44 AM
I can hear it in my head but didn't figure out a good spelling.

that could be a thread in of itself on how to spell the sounds you hear...like a wookie howl for example...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Jdan on October 12, 2011, 03:09:54 PM
Saw the new motus today. It was okay, better looking than in person but still kinda meh. :-\


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 12, 2011, 04:56:10 PM
Stupid F'ing tubular swingarm!!!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on October 12, 2011, 06:17:28 PM
Stupid F'ing tubular swingarm!!!

What's wrong lil buckaroo?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 12, 2011, 06:19:42 PM
What's wrong lil buckaroo?

lol  Ass!

Shape of the swingarm makes it a touch difficult to remove the rear wheel while the bike is on the stand.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: MongoReturns on October 12, 2011, 07:16:46 PM
met a couple guys at Battly's today (it's right next door to Competizione).  I met Sam on facebook previously so it was good to see in person.

great guys in the sales dept.  don't know anyone in service, but as I'll be in that area a lot because of the car I may make introductions. 

Looking forward to riding with Sam and Brian.   

cheers, guys.  Thanks for making it a fun drive out to Gaithersburg.

Battley's is where I go for the 1098, and I won't go anywhere else.  Though it irks me a bit they ride the bike around to the shop part when you take it in, and always do test drives after they do something.  But I'm sure it's for the best.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 13, 2011, 04:05:00 AM
Stupid F'ing tubular swingarm!!!

must be the yeller SC giving you fits...I thought they made a special rear stand for those bikes with a half round cradle attachment for those....sounds like a perfect opportunity though for you to perhaps have a modification done and weld on some spools....


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on October 13, 2011, 06:27:13 AM
lol  Ass!

Shape of the swingarm makes it a touch difficult to remove the rear wheel while the bike is on the stand.

Obviously you need a new bike.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 13, 2011, 06:39:29 AM
BTW....I saw one guy put his SC on a stand with special adaption for to keep it from slipping off....


he put 2 big jaw vice grips opened up and clamped onto the round swingarm and then put it on a regular rear stand and the bike naturally stopped against the Vice Grips and VOILA!!!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 13, 2011, 12:17:01 PM
must be the yeller SC giving you fits...I thought they made a special rear stand for those bikes with a half round cradle attachment for those...

Yep, and they do.  Or at least they did.  Pitbull is basically the only company that makes a specific stand for them now.  I used to have one, but it was stolen early in the spring. 


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 13, 2011, 12:26:51 PM
Yep, and they do.  Or at least they did.  Pitbull is basically the only company that makes a specific stand for them now.  I used to have one, but it was stolen early in the spring. 

take some PVC pipe and make an adaptor?!?!?!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 13, 2011, 12:31:45 PM
Maybe.  I've got the rear wheel off the bike at the moment though...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 14, 2011, 06:57:30 AM
okay, it isn't CL...but I am sure someone like Bikepilot would be interested...

http://www.bobsbmw.com/motorcycles/usedbikes.html (http://www.bobsbmw.com/motorcycles/usedbikes.html)

'07 KTM 950 SuperEnduro R showing in their inventory....


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 14, 2011, 11:15:36 AM
 [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon]

http://www.wtop.com/?nid=139&sid=2592084 (http://www.wtop.com/?nid=139&sid=2592084)

 [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon] [bacon]

'nuff said!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 14, 2011, 01:16:04 PM
okay, it isn't CL...but I am sure someone like Bikepilot would be interested...

http://www.bobsbmw.com/motorcycles/usedbikes.html (http://www.bobsbmw.com/motorcycles/usedbikes.html)

'07 KTM 950 SuperEnduro R showing in their inventory....

That's a bad ass bike right there!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 17, 2011, 05:54:45 PM
A plan is taking shape...  For next summer...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on October 17, 2011, 06:35:27 PM
My electrician wants to trade his KTM 85 for my ar.  He will pay transfer fees. 


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 17, 2011, 06:38:00 PM
My electrician wants to trade his KTM 85 for my ar.  He will pay transfer fees. 

For your kid?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on October 18, 2011, 02:51:01 AM
Eventually.....when I'm done with it! 

"His" KX60 is a ridiculous amount of fun....he hasn't ridden it yet.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 18, 2011, 03:07:12 AM
Is it a smoker, or a 4 stroke?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 18, 2011, 03:08:01 AM
Is it a smoker, or a 4 stroke?

Smoker....all the way!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 18, 2011, 03:10:47 AM
If it is...  That could be stoooopid fun for the redneck carpenter.   [thumbsup]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on October 18, 2011, 04:06:04 AM
Yes, its a two stroke.  Ive got a collection going. 


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Autohag on October 18, 2011, 04:22:07 PM
Sold the pair of KX250's. Looking at just about any MX 450'ish bike for 'tard conversion. Selling the S2R next, and not sure what will replace her. Maybe something fancy. Maybe something soulless. We'll see.

Next season will be a mystery. Cya then! Cheers!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on October 18, 2011, 06:10:30 PM
Dammit@  I didnt know you were selling KX250s?  Were they old and cheap?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: bikepilot on October 19, 2011, 05:24:49 AM
Me either... a 'clean 93 (nostalgic) or an '03+ model might interest me.  An '03+ KX125 would very much interest me - will probably get one of these or a KTM or Husqvarna 144 as my next dirty bike.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 19, 2011, 05:42:15 AM
  Looking at just about any MX 450'ish bike for 'tard conversion. 

http://washingtondc.craigslist.org/nva/mcy/2654456122.html (http://washingtondc.craigslist.org/nva/mcy/2654456122.html)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: bikepilot on October 19, 2011, 06:14:39 AM
That's a heck of a deal.  Just the wheels would fetch nearly the asking price if parted and the VA titled frame is worth some $$ too.  '03 was a first gen frame and considered a slight disadvantage for MX, but I doubt it matters at all for sumo and its still plenty light and slim compared to most anything else.  Motor is largely the same up till they went FI, though it got a bit of a revision in '05.

They are super easy to start as far as four strokes go.  Almost two-stroke-like provided the valves aren't tight.

Its a bit hard to tell in the pic, but if it has the stock caliper you'll want to upgrade it and the MC for hardcore track use.  The stock setup on a 320mm rotor works ok, but isn't really intended for the kind of heat you'll see pushing it hard on the track.

Also there's this http://washingtondc.craigslist.org/nva/mcy/2647403494.html or this [url=http://baltimore.craigslist.org/mcy/2609380174.html,]http://baltimore.craigslist.org/mcy/2609380174.html, (http://washingtondc.craigslist.org/nva/mcy/2647403494.html,)[/url] heavy but way fast.

Buying a sumo is probably cheaper than converting a MX bike.  Wheels and tires will run $1500 (for decent stuff, not Chinese crap), $500+ for a front brake and ~$600 for a suspension re-work so figure a solid $2500 for a basic conversion, then you'll want sliders and random other bits.  Also, a used MX bike will almost invariably need all new rear suspension bearings as they generally only last a season or two of MX racing - figure another $150 there.



Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 19, 2011, 07:24:25 AM
   or this 

http://baltimore.craigslist.org/mcy/2609380174.html (http://baltimore.craigslist.org/mcy/2609380174.html)

http://washingtondc.craigslist.org/nva/mcy/2647403494.html (http://washingtondc.craigslist.org/nva/mcy/2647403494.html)

THIS IS A BUDDY OF MINE'S BIKE...

that and I was fixing the links...



Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Autohag on October 19, 2011, 07:54:34 AM
Dammit@  I didnt know you were selling KX250s?  Were they old and cheap?

Ha! A 2001 and a 2003 (so newer'ish and mint condition). I wasn't planning to sell 'em but a friend of a friend was looking. And, well, they didn't get out much this year... maybe 20 hours on each over the summer.

http://washingtondc.craigslist.org/nva/mcy/2654456122.html (http://washingtondc.craigslist.org/nva/mcy/2654456122.html)

Dats very nice. But this would rob me of my winter project. ;) It sure would make a good starting point. I def want 2 sets of wheels. And my fatass needs a brake upgrade.

I dunno about the Ape... I kinda want a project. Now, for the S2R replacement, I'd consider a Dorsoduro.



Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 19, 2011, 08:09:47 AM
since Rog is having a 2-stroke fix...this ring-a-ding-ding-ding is a sure fire win for terrorizing the neighborhood with!

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120795662238+&viewitem= (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120795662238+&viewitem=)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Jdan on October 27, 2011, 03:16:21 AM
So apparently Travis Pastrana lives off Governor's Bridge Road on the Harwood route.

Anybody else hear this?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 27, 2011, 03:19:09 AM
So apparently Travis Pastrana lives off Governor's Bridge Road on the Harwood route.

Anybody else hear this?

well...that is a change...as he used to live on Kent Island...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Jdan on October 27, 2011, 04:05:23 AM
Hmmm. I know he grew up in Davidsonville and google maps shows his house off gov bridge but ya never know


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 27, 2011, 01:14:50 PM
We ride by his house all the time on the Sunday Bowie route.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: 696DCRider on October 27, 2011, 01:37:02 PM
The CTO of my company was his mentor for rally car when Travis got into the sport (he was a rally car co-driver for many years and is still very involved with the sport).  He said Travis' dad is crazier than Travis.  He said his dad tried to convince him to jump a motorcycle into the foam pit the first time he went over to Travis' house.   [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on October 27, 2011, 02:00:50 PM
We should drop by. With some a few kegs of beer.    [laugh] [beer]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 28, 2011, 05:30:37 AM
We should drop by. With some a few kegs of beer.    [laugh] [beer]

I wouldn't be apposed to that...and I think I could actually safely strap a half keg to the back of the CGC...now...lifting it into place and holding it there, I might need a hand or 2...125lbs of mass called a half keg of beer not as easy to manage...LOL


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on October 31, 2011, 05:36:54 AM
(http://icanhascheezburger.files.wordpress.com/2008/03/funny-pictures-snow-cat-frozen-pee.jpg)


 [laugh] [laugh] [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on November 17, 2011, 04:22:23 AM
Hey Gene, this is up your alley...if you wanted to find an amenable replacement for the Sachs MadAss you have and come back to your youth of racing the older generation of these machines...then this seems to be just the ticket!!! -> http://www.eicma.it/en/news/ossa-explorer-2012-616.htm (http://www.eicma.it/en/news/ossa-explorer-2012-616.htm)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: ducati culture on November 17, 2011, 09:46:58 AM
I need a few fire roads... Any one ..... [Dolph]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on November 17, 2011, 10:36:06 AM
I need a few fire roads... Any one ..... [Dolph]


half of Frederick county is at your disposal...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on November 18, 2011, 05:03:59 AM
half of Frederick county is at your disposal...
River Rd. between Whites Ferry Rd & Edwards Ferry Rd. is all gravel with a few spots of mud and a few holes here and there.

Sugarloaf Mtn Rd. -> Thurston Rd. -> Peters Rd. -> Park Mills Rd. -> Mt Ephraim Rd. (end of the loop in front of the entrance to Sugarloaf Mountain)

And now for something unrelated (the truth behind Berlusconi's resignation as Italian Prime Minister):
(http://clikr.co/files/1/127678504426011.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on November 26, 2011, 06:50:39 AM
Possibly NSFW depending on how good your co-workers sight is.

Russian press conference invaded by flying dildo (http://www.youtube.com/watch?v=zbnDr_IbdIU#)

 [laugh] [laugh] [laugh] [laugh] [laugh] [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on November 28, 2011, 04:23:11 PM
http://thevintagent.blogspot.com/2011/11/are-motorcycles-over.html (http://thevintagent.blogspot.com/2011/11/are-motorcycles-over.html)

"Are motorcycles — even superb and lovely Italian motorcycles from the land of Donatello and Bertolucci — being replaced as love objects, as arm candy, by other more contemporary show-off desirables?"


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on November 29, 2011, 04:58:47 AM
http://thevintagent.blogspot.com/2011/11/are-motorcycles-over.html (http://thevintagent.blogspot.com/2011/11/are-motorcycles-over.html)

"Are motorcycles — even superb and lovely Italian motorcycles from the land of Donatello and Bertolucci — being replaced as love objects, as arm candy, by other more contemporary show-off desirables?"

Since I know you don't venture into that portion of the forum much -> http://www.ducatimonsterforum.org/index.php?topic=53479.0 (http://www.ducatimonsterforum.org/index.php?topic=53479.0)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on November 29, 2011, 09:51:27 AM
Since I know you don't venture into that portion of the forum much -> http://www.ducatimonsterforum.org/index.php?topic=53479.0 (http://www.ducatimonsterforum.org/index.php?topic=53479.0)

Such a very polite Derby.   :D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on November 29, 2011, 07:40:05 PM
Whoops. Yeah, this is the only part I look at 'cause you folks are so entertaining and good lookin' and whatnot.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on November 30, 2011, 01:28:40 PM
and of course MFI has 1 in stock...

http://washingtondc.craigslist.org/nva/mcd/2728628049.html (http://washingtondc.craigslist.org/nva/mcd/2728628049.html)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: bikepilot on November 30, 2011, 01:41:05 PM
I briefly sat on that bike in their showroom, it is sweet  [thumbsup]  If not for student loans I think I'd be swapping the Buell for the SMT.  It has a really slim, light feel, but still comfy or so it seemed.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on November 30, 2011, 01:57:52 PM
I briefly sat on that bike in their showroom, it is sweet  [thumbsup]  If not for student loans I think I'd be swapping the Buell for the SMT.  It has a really slim, light feel, but still comfy or so it seemed.

I thought the same thing when I rode the demo bike at JT Motorsports when the KTM truck showed up there last spring....


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: bikepilot on November 30, 2011, 02:11:25 PM
Cool!  I'm hoping KTM runs out of 990 motors and wedges an RC8R motor in there by the time I've got my loans paid off  [evil] (not that the 990 is a slouch!)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on December 18, 2011, 04:26:12 AM
One of my favorite pics of Lars from the warm days that were...

(http://i154.photobucket.com/albums/s255/jimwatsondc/Ducati/Lars.jpg)

and how I feel about the cold days that are.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on December 18, 2011, 04:31:18 AM
You were just checking out his backside.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on December 18, 2011, 06:14:51 AM
You were just checking out his backside.
Really, I was laughing so hard I almost fell off my bike.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: venomousr1993 on December 18, 2011, 12:10:24 PM
Kenny at MRP says Lars is a crazy SOB. 


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on December 20, 2011, 05:51:06 AM
Found something interesting: more useful than a SUV and should be cheaper in the long run too. These vans are very common in Europe, but less here where people seem to prefer pickups.

2010 Ford Transit Connect XLT Wagon - Drive Time Review (http://www.youtube.com/watch?v=MOjqwyuE7FU#)



Title: Re: CAM (not quite so official) Say Anything Thread
Post by: bikepilot on December 20, 2011, 06:24:51 AM
Yeah, I think they are less popular here because their load capacity is pretty low, their mpg not all that hot and overall not all that comfy.  Big pickups are essentially unavailable (or ultra-expensive) in the UE.  The Transit would be super handy if they suit your need though.  I have a big diesel pickup 'cause its so handy.  I can tow my 20' box trailer with half a dozen bikes in it and haul most anything else I might need to and the interior os ultra-comfortable.  A while back I wanted to build a trials course and I filled the truck up with logs and pallates.  A different time I needed to re-contour my lawn.  Borrowed a buddy's little dozer and towed it home with the truck.  The truck has also hauled many cords of firewood, chugged through deep snow, pulled other things out of ditches, etc.  For some things, like hauling just the trials bike to an event the Transit would be ideal and would save a bit of fuel, but the savings wouldn't be enough to make it worth having two cages.

I would def take the transit over an SUV for most things.   [thumbsup]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on December 22, 2011, 11:30:01 AM
 [laugh] http://imgur.com/a/rhkfp#QcXXu (http://imgur.com/a/rhkfp#QcXXu)

(http://i.imgur.com/ShADL.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: AJ on December 28, 2011, 10:02:48 AM
Thank you Pepco, my visit to DC would not have been complete without this power outage
   [bang]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on December 28, 2011, 12:17:00 PM
Thank you Pepco, my visit to DC would not have been complete without this power outage
   [bang]
It's part of the local folklore, like visiting the museums or the humidity in the summer...  [bang]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on December 28, 2011, 02:58:46 PM
So god has shifted his hatred and now includes the NW District?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on December 28, 2011, 05:14:54 PM
It's about Damn time!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on January 02, 2012, 08:42:01 AM
http://www.washingtonpost.com/opinions/overcharged/2011/12/30/gIQAzQ0yUP_story.html?tid=pm_pop (http://www.washingtonpost.com/opinions/overcharged/2011/12/30/gIQAzQ0yUP_story.html?tid=pm_pop)

"Congress declined to renew either the 45-cent-per-gallon tax credit for corn-based ethanol or the 54-cent-per-gallon tariff on imported ethanol, so both expired Dec. 31.

Taxpayers will no longer have shell out roughly $6 billion per year for a program that badly distorted the global grain market, artificially raised the cost of agricultural land and did almost nothing to curb greenhouse gas emissions. A federal law requiring the use of 36 billion gallons of ethanol for fuel by 2022 still props up the industry, but the tax credit’s expiration is a victory for common sense just the same."


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on January 05, 2012, 08:08:10 AM
(http://stevebacon.org/images/OverConfidentNerd.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on January 12, 2012, 01:47:31 PM
for any AMA member here-> http://www.superbikeplanet.com/2012/Jan/120112eternalmyster.htm (http://www.superbikeplanet.com/2012/Jan/120112eternalmyster.htm)

it definitely raises an eyebrow of concern in terms of possible embezzlement or other not quite on the level kind of thinking....


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on January 15, 2012, 02:26:50 PM
Unhappy or confused about your religion? Looking for a change? Have no fear, the "Religious Flowchart" is here!

(http://www.voiceable.org/wp-content/uploads/2012/01/Flowchart-Choosing-Your-Religion.jpg)


Title: new motorcycle signaling device
Post by: The Mad King Pepe' on January 19, 2012, 10:39:37 AM
http://youtu.be/ZoXs9kdIIhM (http://youtu.be/ZoXs9kdIIhM)

 [laugh] [laugh]


Title: Re: new motorcycle signaling device
Post by: Real Recognize Real on January 19, 2012, 11:57:03 AM
http://youtu.be/ZoXs9kdIIhM (http://youtu.be/ZoXs9kdIIhM)

[laugh] [laugh]

Could you imagine driving behind this and receiving the one finger salute? The laughter alone could cause an accident.


Title: Pickup left dangling on Ga. Train bridge
Post by: The Mad King Pepe' on January 23, 2012, 02:15:14 PM
(http://ww3.hdnux.com/photos/10/07/05/2126182/3/628x471.jpg)

Explanation here: http://www.seattlepi.com/news/article/Police-Pickup-left-dangling-on-Ga-Train-bridge-2646644.php (http://www.seattlepi.com/news/article/Police-Pickup-left-dangling-on-Ga-Train-bridge-2646644.php)


Quote: "The man and his brother, who was a passenger in the truck, are being treated for head injuries..." Silly doctors, those aren't head injuries, they were born like that! [laugh] [laugh] [laugh]
(http://3.bp.blogspot.com/_bBdagpw-kM0/R2_O55FONNI/AAAAAAAADPs/vI0v-DXtQuk/s320/ugly_twins.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on February 03, 2012, 01:25:42 PM
OKAY...forget about the Multi 1200 Ian.....you know you are going to want this...

http://www.motociclismo.it/aprilia-caponord-1200-altra-anteprima-moto-50883 (http://www.motociclismo.it/aprilia-caponord-1200-altra-anteprima-moto-50883)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: JoeP on February 08, 2012, 02:57:58 PM
OMFG! IT'S GOING TO SNOW! SHOULD I WINTERIZE MY BIKE NOW?!?!?  ;)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on February 08, 2012, 05:19:31 PM
OMFG! IT'S GOING TO SNOW! SHOULD I WINTERIZE MY BIKE NOW?!?!?  ;)
Raid the supermarket first! You'll need plenty of food & water to survive until everything return to normality... [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on February 09, 2012, 07:23:42 AM
Raid the supermarket first! You'll need plenty of food & water to survive until everything return to normality... [laugh]

don't forget toilet paper!!!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on February 09, 2012, 07:27:04 AM
OKAY...forget about the Multi 1200 Ian.....you know you are going to want this...

http://www.motociclismo.it/aprilia-caponord-1200-altra-anteprima-moto-50883 (http://www.motociclismo.it/aprilia-caponord-1200-altra-anteprima-moto-50883)

We'll see. Looks a bit too much like one of their sport bikes took a shovel to the face.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Real Recognize Real on February 09, 2012, 05:55:45 PM
Raid the supermarket first! You'll need plenty of food & water to survive until everything return to normality... [laugh]

Don't purchase bread. Make a run on flour, yeast and eggs 'cause they last longer.  [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on February 10, 2012, 03:19:49 AM
Pah! I'll buy ammo. That way, all that is yours becomes mine.   ;D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on February 10, 2012, 03:59:51 AM
Pah! I'll buy ammo. That way, all that is yours becomes mine.   ;D
[thumbsup] Ought to be pretty easy to rustle up dinner with some "canned heat" from http://georgia-arms.com/index.aspx (http://georgia-arms.com/index.aspx)



Title: Re: CAM (not quite so official) Say Anything Thread
Post by: JoeP on February 10, 2012, 05:42:33 AM
OMFG! IT DIDN'T SNOW AT ALL!! WHAT AM I GONNA DO WITH THESE CASES OF STABIL?!?!   ???


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on February 10, 2012, 06:43:21 AM
Anyone going to the nations gun show in Chantilly this weekend?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on February 10, 2012, 06:47:20 AM
Anyone going to the nations gun show in Chantilly this weekend?

completely forgot about that....


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on February 10, 2012, 06:48:14 AM
Im glad I was here to remind you!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on February 10, 2012, 06:49:23 AM
well...perhaps I'll go and wander and drool after I run 10 miles on Sunday....


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Lars D on February 10, 2012, 01:39:25 PM
Harwood is open.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on February 10, 2012, 02:46:44 PM
Anyone going to the nations gun show in Chantilly this weekend?

Yep.  Handan lives about five minutes from there.   [thumbsup]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on February 20, 2012, 11:09:39 AM
66 on Thursday!?!?  [Dolph]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on February 20, 2012, 11:12:57 AM
Yep.  Handan lives about five minutes from there.   [thumbsup]

Didja get anything?  I picked up a few nickknacks......my friends neighbor bought a $4,700 Vanquish Arms .308.  More $$s than sense.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: 696DCRider on February 28, 2012, 12:06:52 PM
Just looked at the weather.  High of 68 on Thursday!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on March 13, 2012, 04:52:41 AM
Bench Press Wheelie CBR 954RR (http://www.youtube.com/watch?v=PmzTAmoA3-c#)


 [laugh] [laugh] [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Real Recognize Real on March 13, 2012, 05:34:22 AM
Bench Press Wheelie CBR 954RR (http://www.youtube.com/watch?v=PmzTAmoA3-c#)


 [laugh] [laugh] [laugh]

Gangster or gangstaaaaaa! He's reppin' for his city. [clap]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on March 16, 2012, 09:18:48 AM
Round up your mates for a GUINNESS on St Patrick's Day (http://www.youtube.com/watch?v=y07at1bU89Q#)

 [laugh] [laugh] [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on March 19, 2012, 03:04:51 PM
ahoj z České republiky
(http://i154.photobucket.com/albums/s255/jimwatsondc/Ducati/DSCN0117.jpg)
Damn! They have good beer here!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on March 19, 2012, 06:09:03 PM
Jim, what did you say to the woman behind you? She's about to hit you with a bottle from the looks of it!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on March 20, 2012, 02:18:20 AM
Jim, what did you say to the woman behind you? She's about to hit you with a bottle from the looks of it!

Preemptive beatings.  You know, just for good measure.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on March 20, 2012, 06:42:00 AM
Preemptive beatings.  You know, just for good measure.

Castle Anthrax (http://www.youtube.com/watch?v=DtcSYPjJbgg#)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on March 30, 2012, 12:15:43 PM
Castle Anthrax

Well played!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on March 30, 2012, 12:19:22 PM
Well played!

Never turn down an opportunity to post quotes from Monty Python or Repo Man!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on April 03, 2012, 09:14:20 AM
http://cgi.ebay.com/ebaymotors/2006-Ducati-Supersport-1000-DS-/140733559758?pt=US_motorcycles&hash=item20c45fb3ce (http://cgi.ebay.com/ebaymotors/2006-Ducati-Supersport-1000-DS-/140733559758?pt=US_motorcycles&hash=item20c45fb3ce)

I think this bike falls more under the "what the make the beast with two backs was he thinking when he did these mods" than anything else train of thought...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on April 03, 2012, 01:17:09 PM
I'd like to have that tank.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on April 03, 2012, 02:17:02 PM
I'd like to have that tank.
You could leave it red and I'm sure McDonald's would sponsor you. [laugh] [laugh]



Yeah, I crack myself up!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on April 04, 2012, 03:04:17 AM
I'd like to have that tank.

because it is metal and wouldn't expand?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on April 04, 2012, 03:14:53 AM
faaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaccckkkk


triple J posted my bike (the one I really want) for sale and I just don't have the cash....

seriously thinking about selling the Gran Canyon and the trackbike for some downpayment money to talk to the bank with....


make the beast with two backs make the beast with two backs make the beast with two backs make the beast with two backs make the beast with two backs make the beast with two backs.....I wants me some KTM 990 SM-T damnit!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on April 04, 2012, 07:53:59 AM
How much for the GC?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on April 04, 2012, 08:10:48 AM
How much for the GC?

well...I think I'd like to see $3000 for it, but am open to some negotiation...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on April 04, 2012, 12:38:33 PM
because it is metal and wouldn't expand?

That, AND the fact that it's different.  Plus, it shouldn't be too difficult to get it on the SC's frame.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on April 09, 2012, 10:36:01 AM
Oh Ben: http://thebikeshed.cc/projects/retro-before-its-time (http://thebikeshed.cc/projects/retro-before-its-time)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on April 09, 2012, 11:17:50 AM
Seen most of those before.  The ones that really do it for me are the NCR and Radical offerings.  No surprises there though. 


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on April 16, 2012, 11:35:39 AM
Sure is quiet today...
(http://www.ccs.neu.edu/home/fell/images/insects/cricket2c.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on May 07, 2012, 12:20:49 PM
Suzuki Motovudu - The Limit is Yours - Simon Crafar - The New GSXR-1000 (http://www.youtube.com/watch?v=bXU2PwNqe-4&feature=player_embedded#)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Lars D on May 07, 2012, 03:35:39 PM
Excellent video!!  Where's the furry guy?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on May 08, 2012, 05:43:25 AM
Possibly the best use for dub-step!  [laugh]

Cat puke compiliation (http://www.youtube.com/watch?v=vYJaUJun4uw#)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on May 25, 2012, 02:49:20 PM
Thunder Buddy Song Mark and Ted (http://www.youtube.com/watch?v=KPToy4tHDGk#)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on June 08, 2012, 07:41:27 AM
ducatiz

check your PM's


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on June 19, 2012, 02:27:49 PM
Holy Crap! It's hot when you're sitting in traffic! I didn't miss summer at all!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on June 20, 2012, 04:17:42 AM
Gonna be worse today and Thursday. Calling for 99-100 tomorrow.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Real Recognize Real on June 20, 2012, 04:58:57 AM
Just finished a morning run - I'm getting too old to deal with this weather. Maybe I shouldn't complain b/c my friend is currently working as a structural welder on top of one of the Smithsonian Buildings. Tig welder + DC weather =  [evil]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on June 20, 2012, 05:42:19 AM
And tomorrow will be hotter...

Hottest 'job' I had was an internship at the Colvin Run mill historic site - doing black smithing on a Civil War era forge... hot hot hot, but at least we had shade.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on June 20, 2012, 05:47:41 AM
And tomorrow will be hotter...

Hottest 'job' I had was an internship at the Colvin Run mill historic site - doing black smithing on a Civil War era forge... hot hot hot, but at least we had shade.
Hottest job I ever had was slopping and shoveling shit on a hog farm one summer in MO...and you guys wonder why I smell so bad now.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on June 20, 2012, 05:48:47 AM
Gets in the pores huh?



Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on June 20, 2012, 10:11:50 AM
Roofing sux.  There is no reason to be a roofer.......just saying.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Real Recognize Real on June 20, 2012, 03:00:07 PM
My hottest job was briefly working as one of the UPS people who packed trucks. There was no A/C and it was hotter in the trucks than outside. That was truly back breaking work.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on July 17, 2012, 12:43:30 PM
WTF is with Pepe's new avatar?...kinda looks like Spock wearing Joker make-up with a Marilyn Monroe wig on...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on July 17, 2012, 01:00:29 PM
This one?

(http://www.iovo.it/wp-content/uploads/2010/06/David-Kassman-Untitled-cm-100x150-lambda-print-on-aluminum.jpg)

Don't even remember how I found it. Photo is by David Kassman, not sure who is the artist. I think it's something like Spock in Drag...  hair makes me think of Queen Elizabeth II.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on July 18, 2012, 10:19:05 AM
Don't even remember how I found it. Photo is by David Kassman, not sure who is the artist. I think it's something like Spock in Drag...  hair makes me think of Queen Elizabeth II.

Thierry Guetta (aka Mr Brainwash). Has done several "Marilyn" pieces. There's the theory that Mr Brainwash is actually a creation of Banksy and Shepard Fairey. Those crazy post-post-post modern artists.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on July 23, 2012, 10:34:33 AM
http://www.wearedesignbureau.com/projects/an-apartment-for-motorcycles/ (http://www.wearedesignbureau.com/projects/an-apartment-for-motorcycles/)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on July 23, 2012, 10:51:20 AM
http://www.wearedesignbureau.com/projects/an-apartment-for-motorcycles/ (http://www.wearedesignbureau.com/projects/an-apartment-for-motorcycles/)
Really?!? You've got to keep up... ;D ;D ;D
http://www.ducatimonsterforum.org/index.php?topic=57772.0 (http://www.ducatimonsterforum.org/index.php?topic=57772.0)

I really should be working....


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on July 23, 2012, 12:01:33 PM
Really?!? You've got to keep up... ;D ;D ;D
http://www.ducatimonsterforum.org/index.php?topic=57772.0 (http://www.ducatimonsterforum.org/index.php?topic=57772.0)

I really should be working....

when we have derby'd him before, he just claims ignornace since he supposedly doesn't read other sections of the forum....


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on July 23, 2012, 01:07:19 PM
when we have derby'd him before, he just claims ignornace since he supposedly doesn't read other sections of the forum....

'tis true.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on July 23, 2012, 01:20:50 PM
when we have derby'd him before, he just claims ignornace since he supposedly doesn't read other sections of the forum....
or is it the rest of the forum that doesn't want him???  [cheeky]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: extra330 on August 02, 2012, 12:17:11 PM
My son in law is a complete idiot & shouldn't be allowed within 50' of a tool box.

that is all



Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on August 02, 2012, 01:03:08 PM
My son in law is a complete idiot & shouldn't be allowed within 50' of a tool box.

that is all

Oh, I don't think so.  Details at eleven, right? 


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: MikeZ on August 08, 2012, 12:23:22 PM
What's happened to Chris (Statler)?
He hasn't been around forever.  Everything OK?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on August 08, 2012, 12:49:08 PM
What's happened to Chris (Statler)?
He hasn't been around forever.  Everything OK?


He's good.  He spends more time on facebook these days.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: MikeZ on August 08, 2012, 12:52:03 PM
He's good.  He spends more time on facebook these days.
Cool.
Happy to hear everything's good.

I'm still denying the existence facebook LOL



Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on August 09, 2012, 02:43:18 AM
I'm still denying the existence facebook LOL



is that because you aren't a smart phone user?

I know I am not on it as much as others due to my lack of a smart phone or tablet....


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: MikeZ on August 09, 2012, 02:47:13 AM
is that because you aren't a smart phone user?

I know I am not on it as much as others due to my lack of a smart phone or tablet....
Nope. I have an iPhone.
Still debating about getting a new Driod this fall/ winter or the new iPhone.
Leaning towards the Droid for now.  Still need to check the Droids ability to rip iTunes and if I can find a good program for that the iPhone will be history


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on August 09, 2012, 09:04:52 AM
if you ever have a broken car in NW DC...don't ever take it to Embassy Sunoco/Service Center at the intersection of P st. and 22nd and 23rd...the woman that runs the place is an egocentric pain in the ass !!!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on August 11, 2012, 02:11:47 PM
Last week at Cars and Coffee saw a bunch of press interviews.  Today at said event there was a huge Eastern Automotive bus with redskins cheerleaders handing out brochures and there was some dude from a  dealership hocking the latest Subaru.

Then there was the guy with the 1/2 scale nascar go cart, sniffing for sponsors.

Hopefully this commercialization is just a passing fad.......


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on August 11, 2012, 02:14:20 PM
Hopefully this commercialization is just a passing fad.......

Doubt it.  You show me a large (ish) group of people, half of which have more than a bit of money, and I'll guarantee someone is trying to market something to them.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on August 11, 2012, 03:01:44 PM
Doubt it.  You show me a large (ish) group of people, half of which have more than a bit of money, and I'll guarantee someone is trying to market something to them.

Yea but all these people hawking car stuff are distracting from my cabinet conversations!  

F-ers!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: TitanMonsterS4R on August 11, 2012, 03:27:05 PM
Last week at Cars and Coffee saw a bunch of press interviews.  Today at said event there was a huge Eastern Automotive bus with redskins cheerleaders handing out brochures and there was some dude from a  dealership hocking the latest Subaru.

Then there was the guy with the 1/2 scale nascar go cart, sniffing for sponsors.

Hopefully this commercialization is just a passing fad.......

That sucks.....hopefully it will pass or I can see some of those exotic cars becoming scarce.  How was the turnout?  Almost went but I thought with the threat of rain most cars would have stayed away. 


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on August 11, 2012, 04:02:14 PM
I was pleasantly surprised at the turn out, it was good!  Last week was the most crowded Ive seen it. 

There was a hilarious showdown between a loud, fancily dressed Asain woman and some dude on a Harley thinking he could cut through the interviews. 

She stuck her leg out and basically dared him to ride over her foot.  The 5 second stare off was most amusing.

Still looking for the rat p/u truck!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: TitanMonsterS4R on August 12, 2012, 02:19:28 PM
I was pleasantly surprised at the turn out, it was good!  Last week was the most crowded Ive seen it. 

There was a hilarious showdown between a loud, fancily dressed Asain woman and some dude on a Harley thinking he could cut through the interviews. 

She stuck her leg out and basically dared him to ride over her foot.  The 5 second stare off was most amusing.

Still looking for the rat p/u truck!

Did you see the pot belly pig and the Vette blaring Top Gun.  Always a good show to see what does and doesn't get attention.  I think the pig had more photos taken than any of the cars on display. 

Still haven't seen the rat??


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on August 12, 2012, 03:26:45 PM
"Foxy" the pig is the bomb!

2 Saturdays ago Foxys owner brought an antique tractor that idled at 22 rpms.......or so it seemed.

The Vette was there last week.  Loves me a 7.0 liter vette!


Title: Re: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on September 09, 2012, 04:23:15 AM
Lars is a wimp who can't handle his booze. That is all.


Title: Re: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on September 09, 2012, 04:27:11 PM
Lars is a wimp who can't handle his booze. That is all.

 [laugh] [laugh] [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on September 10, 2012, 06:08:37 AM
Lars is a wimp who can't handle his booze. That is all.

date night for you two?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on September 17, 2012, 04:18:44 PM
Awwwwwwww, Hell!!! I've got a new favorite TV show: http://www.aetv.com/american-hoggers/ (http://www.aetv.com/american-hoggers/)

of course, Ben thinks it's a dating show. [laugh] [laugh] [laugh] [laugh] [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on September 18, 2012, 02:22:19 AM
What is it with you and your (not so) recent infatuation with red necks?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on September 18, 2012, 04:05:10 AM
What is it with you and your (not so) recent infatuation with red necks?
Just keeping in touch with my roots...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on September 18, 2012, 11:14:09 AM
(http://i.imgur.com/Znm1m.gif)

 [laugh] [laugh] [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on September 20, 2012, 06:02:20 AM
Hilarious - who has a suit?

http://gentlemansride.com/ (http://gentlemansride.com/)

There's a DC/Va contingent: http://dctriumph.com/ai1ec_event/the-distinguished-gentlemans-ride-dc-public-event/ (http://dctriumph.com/ai1ec_event/the-distinguished-gentlemans-ride-dc-public-event/)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Jdan on October 20, 2012, 09:27:32 PM
Anybody have experience with cash on delivery buys?

I'm looking at buying a new bike, and found an amazing deal, but the owner is trying to sell the bike by shipping it overseas. He claims that it has a US title and since he's in the navy he has the bike on duty with him in italy and wants to ship it. They claim that he will ship it to my house and let me inspect it before buying, but it seems to be too good to be true. I'm just trying to watch out for being scammed, since I really don't understand the legality of cash on delivery.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: venomousr1993 on October 21, 2012, 05:46:45 AM
Anybody have experience with cash on delivery buys?

I'm looking at buying a new bike, and found an amazing deal, but the owner is trying to sell the bike by shipping it overseas. He claims that it has a US title and since he's in the navy he has the bike on duty with him in italy and wants to ship it. They claim that he will ship it to my house and let me inspect it before buying, but it seems to be too good to be true. I'm just trying to watch out for being scammed, since I really don't understand the legality of cash on delivery.

S-C-A-M

-Or if it is legit you need to be very careful.  Ben may have better insight since he was stationed in Europe, but my friend was in the Navy at Sigonella and he had a 749R.  He tried all hell to get it shipped back, but it was not on the DOT/NHTSA list of importable motorcycles and it failed to happen.  If he is active in the navy I can look him up in the email system and ask friends I currently have over there to help out.   Honestly I wouldn't risk it though keep searching here and a good deal always pops up.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 21, 2012, 01:06:22 PM
What bike is it? 


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Jdan on October 21, 2012, 01:30:32 PM
It's a '07 VFR800 for about 2500 less than KBB.

Sounds too good to be true though.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on October 23, 2012, 07:41:03 AM
It's a '07 VFR800 for about 2500 less than KBB.

Sounds too good to be true though.
RUN AWAY!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on October 23, 2012, 08:20:16 AM
Sounds too good to be true though.

Because it almost always is.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on October 25, 2012, 06:26:00 AM
Since not everyone is a forum whore like Slow Panda ;D I thought I'd point out my post in the riding techniques section containing a full-length version of Dark Art of Performance with Simon Crafar...lots of good stuff.

Unless you're Brazilian, ignore the subtitles.

http://www.ducatimonsterforum.org/index.php?topic=60426.0 (http://www.ducatimonsterforum.org/index.php?topic=60426.0)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on November 05, 2012, 12:35:23 PM
Remember, remember
The fifth of November


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on November 05, 2012, 02:20:22 PM
(http://image.dhgate.com/upload/php/bbs/20101101/1288584559.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on November 06, 2012, 01:29:50 PM
(http://image.dhgate.com/upload/php/bbs/20101101/1288584559.jpg)
WTF? http://www.c-s-b-s.co.uk (http://www.c-s-b-s.co.uk)


Oh, and F#CK LEARNING CURVES!  [bang] [bang] [bang]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on November 08, 2012, 06:34:02 AM
http://dcbeerathon.com/about (http://dcbeerathon.com/about)

also posted this in the What's in Your Glass thread...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on November 08, 2012, 07:20:09 AM
Wooof.

Though the beer mile (DC rules) might be rougher. Standard beer miles rules (1 12ox beer per lap, 4 laps) are for wimps. DC variant is 72 ounces... yep a mile and a six'er. Can't find the times but the fastest guy is under 6 min now. That's for the run and beer. Last one I could find was 2008 at 6:11 and it was noted he didn't vomit.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on November 08, 2012, 07:38:05 AM
damn hashers...LOL


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Autohag on November 09, 2012, 05:30:27 PM
Keep an eye on this: http://www.techshop.ws/ (http://www.techshop.ws/)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on November 10, 2012, 03:55:07 AM
Keep an eye on this: http://www.techshop.ws/ (http://www.techshop.ws/)
That's cool. You should oughtta open one of those around here.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Autohag on November 10, 2012, 06:08:47 PM
That's cool. You should oughtta open one of those around here.

Yes, I should. I'm almost always goofing around, but this is something I can get serious about.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on November 14, 2012, 03:26:09 AM
Just because I know this will get Lars all stoopid:

KTM 1290 Super Duke R Prototype (http://www.youtube.com/watch?v=6h1e9oulMd8&feature=youtu.be#)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on November 14, 2012, 05:06:55 AM
KTM's gonna be at IMS this year. Might have a production SuperDuke 1290 there


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on November 16, 2012, 09:41:56 AM
Changing jobs is a lot of work. No wonder I stayed at UMD for so long!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on November 16, 2012, 10:13:14 AM
It's a pain in the ass isn't it.

Lots to learn all over again


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: venomousr1993 on November 16, 2012, 02:46:02 PM
Changing jobs is a lot of work. No wonder I stayed at UMD for so long!

Once the 675 is up and running, you should try to get the bike to Kenny at MRP.  I'm sure the suspension needs servicing...they say to service the shock after 10 track hours.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on November 17, 2012, 04:33:51 AM
...they say to service the shock after 10 track hours.


I have never heard that one before...who fed you that malarkey?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: venomousr1993 on November 21, 2012, 08:35:09 AM

I have never heard that one before...who fed you that malarkey?

Read below:

http://www.ohlinsusa.com/ohlins-usa-why-service (http://www.ohlinsusa.com/ohlins-usa-why-service)

Why Service?
Just as you regularly change the oil in your engine, the oil in your suspension needs to be changed as well.  Worse yet, your suspension doesn't have a filter!

With each stroke of travel, the polished surfaces of your suspension pick up microscopic particles of debris.  Those particles get drawn into the oil, and over time contaminate the interior passageways.  As the miles accumulate, so does the grunge.  Without regular service, your high-performance suspension begins to lose it's ability to dampen force.

To keep your investment performing at it's design level, Ohlins recommends servicing your street motorcycle suspension every 12,000 to 15,000 miles, and your track/race bike suspension every 10 hours of track time.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: venomousr1993 on November 21, 2012, 08:41:35 AM
Today I got a nice memory of Japan as I sat on a nice warm toilet seat. 

In Japan, their toilets have adjustments on the seats to make your experience enjoyable...heated seats, adjustable spray patterns ect.

As I reminisced of these day, I quicly realized the warmth was not from heating elements, but the gentleman who had just left the restroom.  My happiness quickly diminished.  damn it all!! 

On a positive note, a recent study of office workplaces revealed the top of a toilet seat is one of the cleanest places of an office space.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on November 21, 2012, 10:02:27 AM
Today I got a nice memory of Japan as I sat on a nice warm toilet seat. 

In Japan, their toilets have adjustments on the seats to make your experience enjoyable...heated seats, adjustable spray patterns ect.

As I reminisced of these day, I quicly realized the warmth was not from heating elements, but the gentleman who had just left the restroom.  My happiness quickly diminished.  damn it all!! 

On a positive note, a recent study of office workplaces revealed the top of a toilet seat is one of the cleanest places of an office space.

THIS IS AWESOMESAUCE OF HUMOR!!!!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on November 21, 2012, 10:49:29 AM
This is my kind of mad stuntaz!

Motofest - Tigerman at action (http://www.youtube.com/watch?feature=player_embedded&v=FYAFvigSWJY#)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: venomousr1993 on November 22, 2012, 04:26:57 PM
A thank you and blessing to those who are serving overseas and their families this Thanksgiving.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on November 28, 2012, 07:00:29 AM
Possibly a derby. A mesmerizing one at that.

http://www.youtube.com/watch?feature=player_embedded&v=GI7AxSVeqPE# (http://www.youtube.com/watch?feature=player_embedded&v=GI7AxSVeqPE#)!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on November 28, 2012, 07:17:40 AM
Yes, derby.

I posted that in General a couple days ago, and it's been moved to 'Riding Techniques'
http://www.ducatimonsterforum.org/index.php?topic=60892.0 (http://www.ducatimonsterforum.org/index.php?topic=60892.0)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: ducati culture on November 28, 2012, 08:10:13 AM
THIS IS AWESOMESAUCE OF HUMOR!!!!

That story made my day. I was in tears!  [laugh] [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on December 06, 2012, 07:31:18 AM
I'll just leave this here...

http://cdn0.dailydot.com/uploaded/images/original/2012/5/31/pony_hole.jpg (http://cdn0.dailydot.com/uploaded/images/original/2012/5/31/pony_hole.jpg)

discuss...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on December 06, 2012, 10:40:03 AM
I'll just leave this here...

http://cdn0.dailydot.com/uploaded/images/original/2012/5/31/pony_hole.jpg (http://cdn0.dailydot.com/uploaded/images/original/2012/5/31/pony_hole.jpg)


I believe you meant to put that in the "What did you do today?" thread.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on December 06, 2012, 11:39:25 AM
Does this mean that Dolci and you have called off the engagement???  [cheeky] [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Autohag on December 07, 2012, 03:40:03 PM
I'll just leave this here...

http://cdn0.dailydot.com/uploaded/images/original/2012/5/31/pony_hole.jpg (http://cdn0.dailydot.com/uploaded/images/original/2012/5/31/pony_hole.jpg)

discuss...

I think that's my little pony.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on December 18, 2012, 06:19:32 PM
I must have been smoking crack when I signed up for 12 hour days with an hour and a half commute on either side of it.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on December 18, 2012, 06:22:33 PM
Yep


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on December 19, 2012, 07:26:48 AM
I must have been smoking crack when I signed up for 12 hour days with an hour and a half commute on either side of it.

Wondering where you've been. They let you smoke crack at your new job? Crazy. We can only do meth where I'm at, and only on odd numbered days.

(are you seriously pulling 15 hours days?)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on December 19, 2012, 07:53:01 AM
I must have been smoking crack when I signed up for 12 hour days with an hour and a half commute on either side of it.

Jebus Jim... that sucks!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on December 19, 2012, 06:31:19 PM
(are you seriously pulling 15 hours days?)
couple days a week...I guess they're trying to get as much out of us as possible before sequestration hits, even though they say our funds are secure through the next couple of years...you know how that is.

Jebus Jim... that sucks!
yes, but it's a greener suck than my old job.  ;D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on December 20, 2012, 09:14:07 AM
couple days a week...I guess they're trying to get as much out of us as possible before sequestration hits, even though they say our funds are secure through the next couple of years...you know how that is.
yes, but it's a greener suck than my old job.  ;D
Are you on a compressed schedule or smth? I'm doing the 4-10 and it's great: I take Wed off and split the week in half.  ;D

Just got an email about sequestration here as well... but I honestly don't expect anything to happen; even if we do go off the "fiscal cliff", which will not happen. Just let the roosters finish posturing and we'll be back to normal. [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Real Recognize Real on December 22, 2012, 08:40:49 AM
Just let the roosters finish posturing and we'll be back to normal. [laugh]

Don't insult the animal kingdom like that. ;D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on January 08, 2013, 10:31:53 AM
Add some more bling to your next meal!

(http://2.bp.blogspot.com/-X8yKN9Monhk/UOW7Ixo3qSI/AAAAAAAAyAI/b6lXwlLhoEM/s640/palati+fini-gourmets-+ducati.jpg)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on February 25, 2013, 04:05:21 PM
Buddy of mine is in need of a decent local (NoVa) bodyshop.  Any worth going to?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on February 26, 2013, 07:35:50 AM
Buddy of mine is in need of a decent local (NoVa) bodyshop.  Any worth going to?

where in NOVA and what make of vehicle?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on February 26, 2013, 03:02:18 PM
He's in Springfield.   The car is a mazda, but he's not terribly concerned about top notch quality.  Just wants to get a bumper "re-attached" at a reasonable price.

 [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on February 27, 2013, 04:21:07 AM
reasonable is relative in some cases when you consider this area in general...

alot of the smaller shops that would have been cheaper per say, have suffered and/or closed due to the tough times in general...but along Backlick and Fullerton there are lots of shops he can check in and inquire with and get a generally free estimate ( at least informally) and compare that way...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: sleepyJ on April 26, 2013, 12:22:11 PM
if hes really not concerned about quality me and my buddies can slap it on there for him :P


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on July 26, 2013, 05:29:56 PM
I got me a brand new combine harvester.... (http://www.youtube.com/watch?v=d2eSP3D0s0w#)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on July 27, 2013, 12:22:51 PM
MkVII Golf in my neighbor's driveway.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on July 28, 2013, 11:42:36 AM
Previously mentioned MkVII

(http://i192.photobucket.com/albums/z53/b_upton/image_zps491c941e.jpeg) (http://s192.photobucket.com/user/b_upton/media/image_zps491c941e.jpeg.html)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on August 06, 2013, 01:23:50 PM
paging Gene

http://www.ducatimonsterforum.org/index.php?topic=64628.msg1191778;boardseen#new (http://www.ducatimonsterforum.org/index.php?topic=64628.msg1191778;boardseen#new)

those would be awesome on your track mule 900SS!!!!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: twolanefun on August 08, 2013, 12:55:22 PM
Yes, almost as nice as the set-up I had on the S2R1000. But the SS currently has DP/CF cans now so not sure I need to spend the $$$. Just got my hot rod truck back, a Fng $8k cost for some minor damage to the body molding because they could not match the paint, ended up re-paint in diffrent flip colors, most of that was the insurance co but still. I need a lift for my new man cave, a garden shed/bldg for the yard, and I'm on the hunt for a new bike, yes 8 will fit I measured. - Gene


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on August 09, 2013, 05:10:06 AM
Yes, almost as nice as the set-up I had on the S2R1000. But the SS currently has DP/CF cans now so not sure I need to spend the $$$. Just got my hot rod truck back, a Fng $8k cost for some minor damage to the body molding because they could not match the paint, ended up re-paint in diffrent flip colors, most of that was the insurance co but still. I need a lift for my new man cave, a garden shed/bldg for the yard, and I'm on the hunt for a new bike, yes 8 will fit I measured. - Gene

yeah, it reminded me very much of your old ARC style system that IIRC was one of the last made by Doug Cook for Donnie right???

that sucks about the truck and the repaint....wish I had known, as I know a couple of places I might have reccomended that do more high end work...though the color flop stuff IS really hard to match/blend in and it is not uncommon for vehicles with that paint to need an entire redo.

8th bike eh?...what flavor are you "Hunt-ing" for this time?!?!?!   ;)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: twolanefun on August 09, 2013, 06:04:57 AM
yeah, it reminded me very much of your old ARC style system that IIRC was one of the last made by Doug Cook for Donnie right???

I dealt with Doug directly, but I did ask Donnie to build the removable baffles when some of the guys complained about riding behind me on trips, as usual he did a gret job on them, two small SS bolts, one each on the bottom at the end of the reverse cone. - Gene


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on September 09, 2013, 05:10:36 PM
And we give you:

http://www.cyclenews.com/396/22265/Racing-Article/First-Look--2014-Ducati-899-Panigale.aspx (http://www.cyclenews.com/396/22265/Racing-Article/First-Look--2014-Ducati-899-Panigale.aspx)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on September 09, 2013, 06:47:07 PM
And we give you:

http://www.cyclenews.com/396/22265/Racing-Article/First-Look--2014-Ducati-899-Panigale.aspx (http://www.cyclenews.com/396/22265/Racing-Article/First-Look--2014-Ducati-899-Panigale.aspx)

"Supermid"? Hmmm. :)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on September 09, 2013, 06:49:27 PM
DSS =  [thumbsdown]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on September 10, 2013, 05:01:08 AM
DSS =  [thumbsdown]
Why would they do that?!?

Is it a way to make sure people don't confuse the 899 with the 1199? To make it seem more lower-spec? Once they engineer the swingarm for the 1199 is it so much more expensive to fit it to the 899? The 748 shared the swingarm with the 916/996 and (unless I'm wrong) so did the 848 with the 1x98...  ??? and  [puke]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on September 10, 2013, 05:19:04 AM
I think part of the SSS for the 1199 vs. DSS for then 899 has to do with torsional flex with power output. The 748/916/996/998 did have a very inherantly designed flex to it when the throttle was twisted in transition from the frame. With the stressed engine member frameless design, you don't have that aspect and that may be from a handling perspective why.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on September 10, 2013, 07:45:46 AM
afternoon, kids.

I'll be at Happy Harbour in Deale this Sat (9/14) at 3:00 for music and beer if anyone is around. 


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: twolanefun on September 10, 2013, 07:49:45 AM
Bummer, I'm going up to NJ for AMA Races. - Gene


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on September 10, 2013, 07:53:40 AM
Bummer, I'm going up to NJ for AMA Races. - Gene

That sounds like more fun.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on September 10, 2013, 08:17:44 AM
Why would they do that?!?

Is it a way to make sure people don't confuse the 899 with the 1199? To make it seem more lower-spec? Once they engineer the swingarm for the 1199 is it so much more expensive to fit it to the 899? The 748 shared the swingarm with the 916/996 and (unless I'm wrong) so did the 848 with the 1x98...  ??? and  [puke]

Single sided swing-arm is heavy = affects handling, plus more expensive to make. You're probably right in the 1199 bs 899 thing; they don't want to deter folks with deeper pockets from getting the 1199.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on September 10, 2013, 08:51:01 AM
afternoon, kids.

I'll be at Happy Harbour in Deale this Sat (9/14) at 3:00 for music and beer if anyone is around. 

damn...I was thinking of you this past weekend when watching the Oracle boat on Sunday afternoon on the tellyvishun....

can't do Saturday....Yom Kippur....after sundown, a friend is hosting his wife's coronation promotion to Lieutenant Colonel with a Luau-esque party....have fun with Peter and tell him we said Heya!

how late we gonna wait to pull the bag outta the water this year BTW? 


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on September 11, 2013, 03:30:05 AM
Argh. 132 new speed / red-light cameras to go up the District.

http://www.washingtonpost.com/local/trafficandcommuting/drivers-beware-dc-to-aim-more-cameras-at-traffic-scofflaws/2013/09/10/c6733ef0-1655-11e3-a2ec-b47e45e6f8ef_story.html?hpid=z4 (http://www.washingtonpost.com/local/trafficandcommuting/drivers-beware-dc-to-aim-more-cameras-at-traffic-scofflaws/2013/09/10/c6733ef0-1655-11e3-a2ec-b47e45e6f8ef_story.html?hpid=z4)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Lucumon on September 11, 2013, 05:13:50 AM
Reminds me of this:

http://www.insurance.com/auto-insurance/saving-money/auto-speeding-ticket-laws.html (http://www.insurance.com/auto-insurance/saving-money/auto-speeding-ticket-laws.html)

I hope all involved in the decision to implement this get cancer.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on September 11, 2013, 06:33:41 PM
from zoooms wapo article:

"Police and elected officials maintain that it’s not about the money. The cameras have made roadways and school zones safer, they said."

No shit, Sherlock! What else are they going to say? "Just give us your money pregnant doges!"  [laugh] [laugh] [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on September 11, 2013, 06:59:30 PM
from Bacon Boy's wapo article:

Fixed that for you. 

 :D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on September 25, 2013, 06:24:11 AM


how late we gonna wait to pull the bag outta the water this year BTW? 

Boat is on the hard.  Have some outboard servicing to do and need to replace stereo speakers in cockpit and put in new stereo inside, etc.etc.etc.

No walking on the ice for me this year.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on September 25, 2013, 06:58:21 AM
Boat is on the hard.  Have some outboard servicing to do and need to replace stereo speakers in cockpit and put in new stereo inside, etc.etc.etc.

No walking on the ice for me this year.

so the bag is already out?....does this mean no great excuse for G's awesome enchilada's ?!?!?!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on October 08, 2013, 05:34:09 PM
so the bag is already out?....does this mean no great excuse for G's awesome enchilada's ?!?!?!

we will find a day to do enchiladas just for you guys.  Perhaps a "rebuild the PVC frame for the lift" afternoon?  Can be in the late fall or early spring.

Also need to do a Ferrari drive somewhere between us for a winery day or something.   


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on October 08, 2013, 05:34:58 PM
Got the best t-shirt in the mail from someone here last week.  I owe pics.   [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on October 09, 2013, 04:01:03 AM
we will find a day to do enchiladas just for you guys.  Perhaps a "rebuild the PVC frame for the lift" afternoon?  Can be in the late fall or early spring.

Also need to do a Ferrari drive somewhere between us for a winery day or something.   

sounds like a winner of an idea!...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on October 09, 2013, 05:53:44 AM
I owe pics.   [laugh]

yeah yah do!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on November 12, 2013, 01:56:57 PM
HOORAY!!!

I'm invited to buy one of the first 899s in the country.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: potomacduc on November 12, 2013, 03:56:56 PM
HOORAY!!!

I'm invited to buy one of the first 899s in the country.

Me too...and I thought I was special... :-[ :'(


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on November 12, 2013, 05:16:19 PM
Everyone is special!  Hell, you can have my chance.  I think that bike sucks.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: potomacduc on November 13, 2013, 03:27:24 PM
It's not on my shopping list either.  These days old bikes are catching my eye. When finances allow me to buy a stablemate for the MTS, I'll likely go the old-timey route.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on November 18, 2013, 05:14:49 PM
(http://i223.photobucket.com/albums/dd110/grumpylawyer/ImageUploadedByTapatalk1384807582979157.jpg) (http://s223.photobucket.com/user/grumpylawyer/media/ImageUploadedByTapatalk1384807582979157.jpg.html)

I shall wear it to all cars and coffees.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on November 19, 2013, 05:38:30 AM
It's about TIME!

Was it that hard...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: rgramjet on November 19, 2013, 12:31:58 PM
I shall wear it to all cars and coffees.

Will you also chase cool cars down the street with your cameras? 


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on November 19, 2013, 02:20:22 PM
yup.    maybe even start a Ferrari spotters thread here.    [cheeky]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on November 19, 2013, 03:02:21 PM
But you have a Mondial. 


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on November 19, 2013, 04:41:27 PM
But you have a Mondial.  

Hahah.  True.  The 140 mph 620 of Ferraris.

Which you have never driven.  ;)



Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on November 19, 2013, 07:06:35 PM
Which you have never driven.  ;)

This is also true.  Drove a Testarosa a few times way back in the day though.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on February 06, 2014, 07:21:48 AM
Is it Spring yet?

Why do we continue to employ that Punxsutawney Phil groundhog? I mean, for all the attention and nice treatment he gets you'd think he'd end Winter early every year. Wait, I'll bet the handler is a skier! Dagnabbit.

Interesting article from Cycle World:
Ducati: "Why Join The Navy When You Can Be A Pirate?"
http://www.cycleworld.com/2014/01/29/ducati-set-to-shake-up-motogp-with-new-open-strategy/ (http://www.cycleworld.com/2014/01/29/ducati-set-to-shake-up-motogp-with-new-open-strategy/)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on February 06, 2014, 02:58:22 PM
Is it Spring yet?
Quit whining and go ride, what's the worst that can happen?

.
.
.

Slippery Road (http://www.youtube.com/watch?v=8gJ9JsyIzA8#)

and

Slipping on Snow (http://www.youtube.com/watch?v=iwzXK0bPc_0#)

the rest was OK.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on February 06, 2014, 05:44:44 PM
 [bow_down]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on February 07, 2014, 07:03:57 AM
good thing it was the Beemer and not the Katoom....


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on February 14, 2014, 07:08:09 AM
Massimo, any riding yesterday?  [cheeky]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on February 23, 2014, 05:44:59 AM
Massimo, any riding yesterday?  [cheeky]

I had started editing the video and then I got sidetracked. Here's my "D'Oh!" moments.

www.youtube.com/watch?v=JWaO1DKQx2U (http://)

www.youtube.com/watch?v=YlqMI1U3t54 (http://)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on March 15, 2014, 12:38:43 PM
Anyone have a Shorai compatible trickle charger I can borrow?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: JoeP on March 15, 2014, 07:33:48 PM
Anyone have a Shorai compatible trickle charger I can borrow?

Did you accidentally drain one? I used a regular Deltran tender and it worked in a jam. Charged it up in 20 minutes to the point where the bike would start. Then I just rode the bike for a while to charge it the rest of the way.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on March 17, 2014, 04:20:51 AM
Anyone have a Shorai compatible trickle charger I can borrow?
A BatteryTender or similar will work as long as it doesn't have a 'de-sulfation' mode.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on March 17, 2014, 10:09:50 AM
I have a Battery Tender "for gel batteries" (according to the sticker on it) that you can borrow.

You gonna ride this year? Lovely weather right now.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on March 17, 2014, 01:05:49 PM
Thanks Steve.  Not sure if I'm going to be riding or not.  Someone wants to come look at the SD, and I figure it would be nice if it started when he stopped by.   ;D


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: TitanMonsterS4R on March 17, 2014, 02:29:21 PM
Thanks Steve.  Not sure if I'm going to be riding or not.  Someone wants to come look at the SD, and I figure it would be nice if it started when he stopped by.   ;D

I've got a Shorai battery charger if you need one. Let me know and we can find a place to exchange.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on March 18, 2014, 11:16:15 AM
Thanks Steve.  Not sure if I'm going to be riding or not.  Someone wants to come look at the SD, and I figure it would be nice if it started when he stopped by.   ;D

Wait, when the SD go on the market?!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on March 18, 2014, 12:01:58 PM
Wait, when the SD go on the market?!

he's had it sort of half hearted on the market for a while now...I guess he is just being a little more serious about it now....


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on March 18, 2014, 02:16:18 PM
Both of the bikes have half-heartedly, sorta-kinda been on the market for a while.  Had someone come down from PA last year and wave $14K in my face for the SC, but...  As of now, they're both still in the garage.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on March 19, 2014, 12:07:56 PM
Hi, strangers. 

Speaking of Bikes for sale:   I think G's 620 street/track thing and my 750/900 track bike are for sale.    The s4rs may be too.   All have track rash but run fine.

We will likely keep the RS unless someone wants all three for a good deal.

The BSTs on the RS are fine.  I do not have the stock wheels.

We moved into the new place.   Toy replacement commencing (need powerboat).

Oh hell...   Only two for sale.   The RS is a keeper. 


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on March 19, 2014, 12:30:21 PM
We moved into the new place.     

?!?!?!?!...DETAILS....need enchilada location !!!



Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on March 19, 2014, 04:15:27 PM
?!?!?!?!...DETAILS....need enchilada location !!!



No kidding.  What's the deal on the new place Chris?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on March 19, 2014, 05:20:01 PM
I'll post pics but I have to host them first.   If you guys find gwendy's fb page she has pics.

It was quite a coup.   wasn't for sale.   4,300 sq ft on a great river 15 minutes from my office and our daughter's school.  South of town where we spent most of our time anyway.

House in Essex will be listed in about a month once I finish some projects there and we stage it.   If people know anyone who wants waterfront just North of Baltimore let me know.  :)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on March 19, 2014, 05:35:33 PM
If people know anyone who wants waterfront just North of Baltimore let me know.  :)

Email me the details once you have them figured out.  I might know someone who would be interested.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on March 20, 2014, 03:08:44 AM
place looks nice Statler....am jealous a bit....should be easy with the trimaran though, even if that dock doesn't look that deep....I am still up for bag removal for enchilada's parties and opportunities to get out on the water with you guys if ever the invite avails itself...


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on March 20, 2014, 10:49:04 AM
8 feet of water.

we need 1 1/2   ;D

Lift will go on other side of pier from boathouse.    Need little 17 foot runabout for boathouse.

It'll take some time but there shall be sailing.   [beer]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on March 20, 2014, 12:28:52 PM
8 feet of water.

we need 1 1/2   ;D

Lift will go on other side of pier from boathouse.    Need little 17 foot runabout for boathouse.

It'll take some time but there shall be sailing.   [beer]

[thumbsup]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: zooom on April 01, 2014, 06:54:27 AM
just a heads up on what is going on with me....

http://www.ducatimonsterforum.org/index.php?topic=198.msg1242578#msg1242578 (http://www.ducatimonsterforum.org/index.php?topic=198.msg1242578#msg1242578)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: ducati culture on April 30, 2014, 08:53:50 AM
8 feet of water.

we need 1 1/2   ;D

Lift will go on other side of pier from boathouse.    Need little 17 foot runabout for boathouse.

It'll take some time but there shall be sailing.   [beer]

I never hear the word fishing WT heck!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on April 30, 2014, 02:32:49 PM
8 feet of water.

we need 1 1/2   ;D

Lift will go on other side of pier from boathouse.    Need little 17 foot runabout for boathouse.

It'll take some time but there shall be sailing.   [beer]

done any sailing today? I could imagine you taking the boat to work instead of the car...  [laugh]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on May 02, 2014, 05:24:03 PM
Boat is on a the trailer in Essex still.   The permits for the new pier and boathouse went in this week… meaning piling replacements go in perhaps two months from now.

The fishing, however, is great.  (Dana… come on up).

Zoom, no boat lift bags to pull, but G still makes a mean enchilada and there's booze.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: The Mad King Pepe' on June 01, 2014, 07:23:04 AM
Selling my Icon Hooligan 2 Mil-Spec mesh jacket: http://www.ducatimonsterforum.org/index.php?topic=67794.0 (http://www.ducatimonsterforum.org/index.php?topic=67794.0)



Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Statler on June 05, 2014, 04:37:38 PM
I just offered up my RS, the 620, the 900/750 track bike, and the kendon trailer for 12K if anyone local is interested.    :(

The bikes have track rash but are OK.

service needed. 

We're focussing on sailing, a new house, and a possible cobra build.  :)



Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on June 09, 2014, 08:44:53 AM
Hah! Ducati once again shows they are masters of restyling their product line. Just got the teaser for the Scrambler (very 70s-vibe video). Theory is it will be using the air-cooled motor; probably a smaller one (696?) since it's supposed to be a on / "off road" lightweight. "Off road" in heavy air quotes :)

The air-cooled engine just will not die! (and that's a good thing).

(I'm sure this is all over other sections of DMF, but since I'm CAM-centric...)

Oh yeah, the video / micro-site: http://scramblerducati.com (http://scramblerducati.com)


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: potomacduc on June 09, 2014, 10:51:18 AM
While the a-c engine isn't dead yet, it is getting rarer by the minute. In 2015 if you want an a-c bike, you'll be pretty much limited to cruisers, retro bikes (R Nine-T, Triumphs, Duc Scrambler) and Guzzis.   


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Jdan on August 13, 2014, 11:47:26 AM
Had my first track day on monday. Im hooked already!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: twolanefun on August 13, 2014, 12:14:14 PM
Cool, what track? - Gene


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Jdan on August 13, 2014, 12:35:59 PM
summit point!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on August 27, 2014, 04:54:31 AM
summit point!

Which course?

What bike did you take?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on June 19, 2015, 10:26:53 AM
Shisha on the beach.  Life is hard.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on August 29, 2016, 07:12:46 PM
Not sure who, if anyone, had kept in touch with Randy after he retired from the Marines and moved down near VIR, but it seems he was in a pretty significant motocross crash the other day.  He is at Duke medical center, in NC, and last I heard is still on a respirator and has yet to regain feeling below the neck.  Let's everyone keep him in our thoughts, and wish for a speedy recovery.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Lars D on August 30, 2016, 11:28:11 AM
That's awful to hear, I hope he gets better and has a speedy recovery.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: ducpainter on August 30, 2016, 04:20:10 PM
Not sure who, if anyone, had kept in touch with Randy after he retired from the Marines and moved down near VIR, but it seems he was in a pretty significant motocross crash the other day.  He is at Duke medical center, in NC, and last I heard is still on a respirator and has yet to regain feeling below the neck.  Let's everyone keep him in our thoughts, and wish for a speedy recovery.
Ben...

you have a screen name?...

to put things in perspective?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on August 30, 2016, 05:26:36 PM
venomousr1993


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: ducpainter on August 30, 2016, 05:42:44 PM
Thanks.

His name is not unfamiliar.

I hope he gets well...soon!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on September 07, 2016, 10:27:09 AM
Any updates on Randy?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on October 15, 2016, 02:44:57 PM
Holy crap!!! I'm alive and the Duc is up and running!!!  [Dolph] Stepper motors and fuel injectors are expensive. [bang] Raffaele at FasterTwin did a kick-ass job on putting me back in the seat. My bike is running better than it ever has. Highly recommend.  [thumbsup]

Anyway, I'll be back in the DC area full time starting in January. Please moto-gods let there be lots of warm days over the winter.



Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 16, 2016, 08:14:24 PM
Come down here and there will be.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on October 21, 2016, 10:54:38 AM
He lives! How the hell are ya J?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on October 21, 2016, 06:25:08 PM
Come down here and there will be.

I have to admit, I did like NM when I visited. Might end up out there again at some point. Hows D?


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Meerkat on October 21, 2016, 06:35:12 PM
He lives! How the hell are ya J?

I'm good. Got fat, got skinny, mostly stable now...at least weight-wise. LOL Work has me splitting time between Fort Fumble and Hick-filled County, MD until JAN then I'll be here full time. How about you?

Thinking about dragging my ass out to ride with crazy Lars this weekend. [Dolph]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on October 21, 2016, 07:19:18 PM
I have to admit, I did like NM when I visited. Might end up out there again at some point. Hows D?

Dude, I'm loving t out here, and so is she.  Applied for a position that could take me back to Germany though, so we'll see how that goes.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on October 22, 2016, 10:03:31 AM
I'm good. Got fat, got skinny, mostly stable now...at least weight-wise. LOL Work has me splitting time between Fort Fumble and Hick-filled County, MD until JAN then I'll be here full time. How about you?

Thinking about dragging my ass out to ride with crazy Lars this weekend. [Dolph]

Well. Busy, but well. Currently sans street legal bike(s) - but I do have that Daytona track bike, I believe we chatted about. Flirting with the Advanced pace group these days at the track.

You should come out some time. Good fun!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: DRKWNG on January 31, 2017, 05:27:34 AM
Not sure who, if anyone, had kept in touch with Randy after he retired from the Marines and moved down near VIR, but it seems he was in a pretty significant motocross crash the other day.  He is at Duke medical center, in NC, and last I heard is still on a respirator and has yet to regain feeling below the neck.  Let's everyone keep him in our thoughts, and wish for a speedy recovery.

Randy passed away over the weekend.  Rest In Peace Brother.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Slide Panda on January 31, 2017, 05:34:35 AM
I just caught wind of this crappy news as well.

Last I'd heard, he seemed to be doing better - he was trading texts with my neighbor who'd bought one of Randys track rides.

RIP Randy


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: Autohag on February 02, 2017, 06:36:06 AM
Randy passed away over the weekend.  Rest In Peace Brother.

Brett informed me last night. My condolences to those who were close to him. Rest in peace.


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: tocino on February 06, 2017, 03:20:29 PM
From the FaceBooks:

A celebration of a life filled with love and family, friends, the Marines, track memories and laughter has been planned for Randy Chabot.

All are welcome to join us in N Chesterfield, VA on Saturday Feb 25th, 11am, Morrissett Funeral Home.

More details will be shared soon on the Morrissett web site. It will have all the latest info.

Thank you!


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: krolik on April 08, 2017, 06:33:37 PM
Howdy! [drink]


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: twolanefun on April 09, 2017, 02:22:54 AM
Back at you [beer] - Gene


Title: Re: CAM (not quite so official) Say Anything Thread
Post by: krolik on April 09, 2017, 03:11:23 PM
How's the riding been?


SimplePortal 2.1.1